著書

  1. 石川晴雄，中山良一，井上全人，現代設計工学，コロナ社，(2012.4.20).
    ISBN 978-4-339-04625-0

原著論文（査読付）

  1. 石灰伸好，井上全人，山本渉，鈴木和幸，石川晴雄， 車両開発の初期構想段階におけるトポロジーと形状の同時満足化設計， 自動車技術会論文集，in press, (2014).
  2. Kento Igarashi, Tetsuo Yamada and Masato Inoue, 2-Stage Optimal Design and Analysis for Disassembly System with Environmental and Economic Parts Selection using Recyclability Evaluation Method, Industrial Engineering & Management Systems, in press, (2014).
  3. 山田哲男，奥寺勇人，伊坪徳宏，井上全人， 部品構成と作業先行関係を考慮した素材仕分け分解システムの性能評価， 日本設備管理学会誌，Vol. 25，No. 4, pp. 178-185, (2014.1).
  4. Stefan Bracke, Jens Michalski, Masato Inoue and Tetsuo Yamada, CDMF-RELSUS Concept: Reliable Products are Sustainable Products - Influences on Product Design, Manufacturing and Use Phase, International Journal of Sustainable Manufacturing, Inderscience Publishers, Vol. 3, No. 1, pp. 57-73, (2014.1).
  5. Masato Inoue, Yoon-Eui Nahm, Kenji Tanaka and Haruo Ishikawa, Collaborative Engineering among Designers with Different Preferences: Application of the Preference Set-Based Design to the Design Problem of an Automotive Front-Side Frame, Concurrent Engineering: Research and Applications, SAGE Publications, Vol. 21, Issue 4, pp. 252-267, doi: 10.1177/1063293X13493447, (2013.12).
  6. Masato Inoue, Yoon-Eui Nahm and Haruo Ishikawa, Application of Preference Set-Based Design Method to Multilayer Porous Materials for Sound Absorbency and Insulation, International Journal of Computer Integrated Manufacturing, Taylor & Francis, Vol. 26, Issue 12, pp. 1151-1160, doi: 10.1080/0951192X.2011.60236, (2013.12).
  7. Kento Igarashi, Tetsuo Yamada and Masato Inoue, Disassembly System Design with Environmental and Economic Parts Selection using Recyclability Evaluation Method, Journal of Japan Industrial Management Association, Vol. 64, No. 2E, pp. 293-302, (2013.7).
  8. Yoon-Eui Nahm, Haruo Ishikawa and Masato Inoue, New Rating Methods for Prioritizing Customer Requirements in QFD with Incomplete Customer Preferences, International Journal of Advanced Manufacturing Technology, Springer-Verlag London, Vol. 65, Issue 9-12, pp. 1587-1604, doi:10.1007/s00170-012-4282-1, (2013.4).
  9. Masato Inoue, Kai Lindow, Rainer Stark, Kenji Tanaka, Yoon-Eui Nahm and Haruo Ishikawa, Decision-Making Support for Sustainable Product Creation, Advanced Engineering Informatics, Elsevier, Vol. 26, Issue 4, pp. 782-792, doi: 10.1016/j.aei.2012.07.002, (2012.10).

単行本掲載論文（査読付）

  1. Masato Inoue, Yoon-Eui Nahm, Kenji Tanaka and Haruo Ishikawa,
    Decision-Making Support for Selection of Design Ideas at the Early Phase of Structural Design,
    Concurrent Engineering Approaches for Sustainable Product Development in a Multi-Disciplinary Environment,
    Springer London, Edited by Josip Stjepandic, Georg Rock, Cees Bil, Volume 1, pp. 521-532, doi: 10.1007/978-1-4471-4426-7_45, (2013).
    ISBN 978-1-4471-4425-0
  2. Kai Lindow, Robert Woll, Masato Inoue, Haruo Ishikawa and Rainer Stark,
    Approaches for Sustainability Assessment in the Conceptual Design Phase,
    Sustainable Product Development,
    Springer-Verlag London, Edited by Amaresh Chakrabarti, Chapter 36, pp. 377-387, doi: 10.1007/978-1-4471-4507-3_36, (2012.11).
    ISBN 978-1-4471-4506-6

国際会議論文（査読付）

  1. Kento Igarashi, Tetsuo Yamada, Masato Inoue, Norihiro Itsubo and Surendra M Gupta, Multi Criteria Optimization Model for Disassembly Cost, Recycling Rate and Carbon Emissions, 44th Decision Sciences Institute Annual Meeting 2013, Baltimore, USA (2013.11.16-19)
  2. Jens Michalski, Tetsuo Yamada, Masato Inoue and Stefan Bracke, CDMF-RELSUS Concept: Reliable Products are Sustainable Products - Automotive Case Study "Clutch", 11th Global Conference on Sustainable Manufacturing, Berlin, GERMANY (2013.9.23-25).
  3. Masato Inoue, Masaki Takahashi and Haruo Ishikawa, A Design Method for Unexpected Circumstances: Application to an Active Isolation System, Proceedings of 20th ISPE International Conference on Concurrent Engineering, pp. 155-162, IOS Press, Melbourne, AUSTRALIA (2013.9.4).
    doi: 10.3233/978-1-61499-302-5-155
  4. Tomoyuki Urata, Tetsuo Yamada, Norihiro Itsubo Masato Inoue, An Optimal Design for Global Supply Chain Network Considering CO2 Emissions of Part Production, International Symposium on Scheduling 2013 (ISS2013), pp. 190-195, Tokyo, JAPAN (2013.7.20).
  5. Yuta Yoshizaki, Tetsuo Yamada, Norihiro Itsubo Masato Inoue, Low-Carbon Supplier Selection Using Life Cycle Inventory Database in China and Japan, International Symposium on Scheduling 2013 (ISS2013), pp. 184-189, Tokyo, JAPAN (2013.7.20).
  6. Tetsuo Yamada, Kento Igarashi, Norihiro Itsubo Masato Inoue, Disassembly System Design with Optimal Environmental and Economic Parts Selection Using Life Cycle Inventory Database by Input-Output Tables, Northeast Decision Sciences Institute, 2013 Annual Conference, pp. 873-878, Brooklyn, New York, USA (2013.4.5-7).
  7. Kento Igarashi, Tetsuo Yamada, Masato Inoue, Optimal Design of Disassembly System with Environmental and Economic Parts Selection using Recyclability Evaluation Method, Proceedings of the Asia Pacific Industrial Engineering & Management Systems Conference 2012, pp. 589-599.
    The 13th Asia Pacific Industrial Engineering and Management Systems Conference, pp. 589-599, Patong Beach, Phuket, Thailand (2012.12.2-5) 【The Best Student Paper Award】
  8. Nobuyoshi Ishibai, Masato Inoue, Wataru Yamamoto, Kazuyuki Suzuki, Haruo Ishikawa, Study of Achieving the Performance for ECE-R29_03 Regulation, DEKRA Symposium Safety of Commercial Vehicles, Stuttgart, Germany (2012.11.8-9).
  9. Tetsuo Yamada, Yusuke Suzuki, Tadayuki Masui, Norihiro Itsubo, Masato Inoue, Disassembly System Design with Environmental and Economic Parts Selection Using Life Cycle Inventory Database by Input-Output Tables, 10th Global Conference on Sustainable Manufacturing, Istanbul, TURKEY (2012.10.31-11.2).
  10. Stefan Bracke, Jens Michalski, Masato Inoue and Tetsuo Yamada, CDMF-RELSUS Concept: Reliable Products are Sustainable Products - Influences on Product Design, Manufacturing and Use Phase, 10th Global Conference on Sustainable Manufacturing, Istanbul, TURKEY (2012.10.31-11.2). 【Keynote Speech】
  11. Masato Inoue, Yoon-Eui Nahm, Kenji Tanaka and Haruo Ishikawa, Decision-Making Support for Selection of Design Ideas at the Early Phase of Structural Design, 19th ISPE International Conference on Concurrent Engineering, Trier, GERMANY (2012.9.3-7).
  12. Kento Igarashi, Tetsuo Yamada, Masato Inoue, Disassembly System Design with Environmental and Economic Parts Selection using Recyclability Evaluation Method, International Symposium on Reliability Engineering and Risk Management (ISRERM 2012), Yokohama, JAPAN (2012.8.5-8).

招待講演

  1. Masato Inoue, Japan / Fukushima: Das Tohoku Erdbeben und der Tsunami -Konsequenzen für Bevölkerungs- und Objektschutz (Japan / Fukushima: The Tohoku Earthquake and the Tsunami - Consequences regarding the protection of population and objects), University of Wuppertal, Germany (2013.12.4).
  2. Masato Inoue, Design methodology for the early phase of design - Japanese product development of automotive industries -, University of Wuppertal, Germany (2013.12.4).

国際会議/シンポジウム論文（査読無）

  1. Takuya Ninomiya, Masaki Takahashi, Masato Inoue, A Design Method for Unexpected Circumstances, 7th International Symposium on Mechanics, Aerospace and Informatics Engineering (ISMAI07), Hakone, Japan (2013.2.21).

国内学会口頭発表

  1. 井上全人，浅田大介，加藤修一，石灰伸好，石川晴雄， 位相構造の違いを含む多目的満足解集合を導出するための構造設計手法の提案， 第23回日本機械学会 設計工学・システム部門講演会 @ 読谷村，(2013.10.23).
  2. 石灰伸好，井上全人，山本渉，鈴木和幸，石川晴雄， 車両開発の初期構想段階におけるトポロジーと形状の同時満足化設計， 2013年自動車技術会秋季大会 @ 名古屋国際会場，(2013.10.23).
  3. 井上全人，石川晴雄， セットベース設計概念に基づく構造形態の決定支援方法の提案， 第22回日本機械学会 設計工学・システム部門講演会 @ 広島大学，pp. 324-329, (2012.9.26-28).
  4. 五十嵐健人，山田哲男，井上全人，西隆之，荒川雅裕， リサイクル性評価法を用いた取り外し部品の選択を持つ分解システム設計， 日本経営工学会平成24年度春季大会 @ 法政大学，(2012.5.26-27).