ACHIEVEMENT | Meiji University Design System Laboratory

Journal Papers
Books
Conference Papers
Lecture
Conference Papers(English)

Peer-Reviewed Journal Papers (written in English)

Jaeho Han, Hiromasa Ijuin, Tetsuo Yamada, Shuho Yamada and Masato Inoue, Sustainability Assessment of Reuse and Recycling Management Options for End-of-life Computers- Korean and Japanese Case Study Analysis, Recycling, Vol. 6, No. 55, pp. 1-17, (2021.08).
Tetsuo Yamada, Yusuke Suzuki, Yuki Kinoshita, Tadayuki Masui, Norihiko Itsubo and Masato Inoue, Disassembly System Design and Analysis with Environmental and Economic Parts Selection Using Life Cycle Inventory Database by Input-Output Tables, International Journal of Sustainable Manufacturing, Inderscience Publishers, Vol. 5, No. 1, pp. 23-43, (2021.07).
Masato Inoue, Wataru Suzuki, Shuho Yamada and Kazuhiro Aoyama, A Universal Design Method that Considers Variability in User Requirements: a Case Study of Mechanical Pencil Design, Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol. 15, No. 2, DOI:10.1299/jamdsm.2021jamdsm0022, (2021.03).
Shuho Yamada, Shogo Miyajima, Tetsuo Yamada, Stefan Bracke and Masato Inoue, Decision Support Method for Upgrade Cycle Planning and Product Architecture Design of an Upgradable Product, International Journal of Automation Technology, Vol. 14, No. 6, pp. 919-929, (2020.11).
Kazuki Yoda, Hayate Irie, Yuki Kinoshita, Tetsuo Yamada, Shuho Yamada and Masato Inoue, Remanufacturing Option Selection with Disassembly for Recovery Rate and Profit, International Journal of Automation Technology, Vol. 14, No. 6, pp. 930-942, (2020.11).
Tomoaki Yatsuka, Aya Ishigaki, Surendra Gupta, Yuki Kinoshita, Tetsuo Yamada, and Masato Inoue, Collaboration Strategy for a Decentralized Supply Chain Using Linear Physical Programming, International Journal of Automation Technology, Vol. 14, No. 5, pp. 723-733, (2020.09).
Masato Inoue, Shuho Yamada, Shogo Miyajima, Katsuhide Ishii, Rina Hasebe, Kazuhiro Aoyama, Tetsuo Yamada and Stefan Bracke, A Modular Design Strategy Considering Sustainability and Supplier Selection, Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol. 14, No. 2, doi:10.1299/jamdsm.2020jamdsm0023, (2020.03).
Hiromasa Ijuin, Yuki Kinoshita, Tetsuo Yamada, Aya Ishigaki and Masato Inoue, Designing Reverse Supply Chain Network with Costs and Recycling Rate by Using Linear Physical Programming, International Journal of Smart Computing and Artificial Intelligence, Vol. 3, No. 2, pp. 57-76, (2019.11).
Masato Inoue and Wataru Suzuki, Universal Design Considering Physical Characteristics of Diverse Users, International Journal of Automation Technology, Vol. 13, No. 4, pp. 517-525, (2019.07).
Kengo Nakamura, Hiromasa Ijuin, Tetsuo Yamada, Aya Ishigaki and Masato Inoue, Design and Analysis of Global Supply Chain Network with Trans-Pacific Partnership under Fluctuating Material Prices, International Journal of Smart Computing and Artificial Intelligence, Vol. 3, No. 1, pp. 17-34, (2019.05).
Shota Hasegawa, Yuki Kinoshita, Tetsuo Yamada, Masato Inoue, and Stefan Bracke，Disassembly Reuse Part Selection for Recovery Rate and Cost with Lifetime Analysis, International Journal of Automation Technology, Vol. 12, No. 6, pp. 822-832, (2018.11).
Yuki Kinoshita, Tetsuo Yamada, Surendra M. Gupta, Aya Ishigaki and Masato Inoue，Analysis of Cost Effectiveness by Material Type for CO₂ Saving and Recycling Rates in Disassembly Parts Selection using Goal Programming, Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol. 12, No. 3, pp. 1-18, doi: 10.1299/jamdsm.2018jamdsm008, (2018.7).
Tomoyuki Urata, Tetsuo Yamada, Norihiro Itsubo, and Masato Inoue, Global Supply Chain Network Design and Asian Analysis with Material-Based Carbon Emissions and Tax, Computers & Industrial Engineering, Vol. 113, pp. 779-792, (2017.11).
Shuho Yamada, Tetsuo Yamada, Stefan Bracke and Masato Inoue, Upgradable Design for Sustainable Manufacturer Performance and Profitability and Reduction of Environmental Load, International Journal of Automation Technology, Vol. 10，No. 5, pp. 690-698, doi:10.20965/ijat.2016.p0690, (2016.09).
Tomoyuki Urata, Tetsuo Yamada, Norihiro Itsubo, and Masato Inoue, Global Supply Chain Network Design for Lower Material-Based CO₂ Emissions and Costs between Developed and Emerging Countries, Journal of Japan Industrial Management Association, Vol. 67, No. 2E, pp. 156-166, (2016.09).
Yuki Kinoshita, Tetsuo Yamada, Surendra M. Gupta, Aya Ishigaki and Masato Inoue，Disassembly Parts Selection and Analysis for Recycling Rate and Cost by Global Programming，Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol. 10, No. 3, pp. 1-15, (2016.07).
Kento Igarashi, Tetsuo Yamada, Surendra M. Gupta, Masato Inoue and Norihiro Itsubo，Disassembly System Modeling and Design with Parts Selection for Cost, Recycling and CO₂ Saving Rates Using Multi Criteria Optimization，Journal of Manufacturing Systems, Elsevier, Vol. 38, pp. 151-164, (2016.01).
Yuta Yoshizaki, Tetsuo Yamada, Norihiro Itsubo and Masato Inoue，Material Based Low-Carbon and Economic Supplier Selection with Estimation of GHG Emissions and Affordable Cost Increment for Parts Production among Multiple Asian Countries，Journal of Japan Industrial Management Association, Vol. 66, No. 4E, pp. 435-442, (2016.01).
Yuta Yoshizaki, Tetsuo Yamada, Norihiro Itsubo and Masato Inoue, Material Based Low-Carbon and Economic Supplier Selection with Estimation of CO₂ Emissions and Cost Using Life Cycle Inventory Database, Innovation and Supply Chain Management，Vol. 8，No. 4，pp. 159-170, (2014.12).
Kento Igarashi, Tetsuo Yamada and Masato Inoue, 2-Stage Optimal Design and Analysis for Disassembly System with Environmental and Economic Parts Selection using Recyclability Evaluation Method, Industrial Engineering & Management Systems，Vol. 13，No. 1, pp. 53-67, doi:10.7232/iems.2014.13.1.053, (2014.3).
Stefan Bracke, Jens Michalski, Masato Inoue and Tetsuo Yamada, CDMF-RELSUS Concept: Reliable Products are Sustainable Products - Influences on Product Design, Manufacturing and Use Phase, International Journal of Sustainable Manufacturing, Inderscience Publishers, Vol. 3, No. 1, pp. 57-73, doi:10.1504/IJSM.2013.058634, (2014.1).
Masato Inoue, Yoon-Eui Nahm, Kenji Tanaka and Haruo Ishikawa, Collaborative Engineering among Designers with Different Preferences: Application of the Preference Set-Based Design to the Design Problem of an Automotive Front-Side Frame, Concurrent Engineering: Research and Applications, SAGE Publications, Vol. 21, No. 4, pp. 252-267, doi: 10.1177/1063293X13493447, (2013.12).
Masato Inoue, Yoon-Eui Nahm and Haruo Ishikawa, Application of Preference Set-Based Design Method to Multilayer Porous Materials for Sound Absorbency and Insulation, International Journal of Computer Integrated Manufacturing, Taylor & Francis, Vol. 26, Issue 12, pp. 1151-1160, doi: 10.1080/0951192X.2011.60236, (2013.12).
Kento Igarashi, Tetsuo Yamada and Masato Inoue, Disassembly System Design with Environmental and Economic Parts Selection using Recyclability Evaluation Method, Journal of Japan Industrial Management Association, Vol. 64, No. 2E, pp. 293-302, (2013.7).
Yoon-Eui Nahm, Haruo Ishikawa and Masato Inoue, New Rating Methods for Prioritizing Customer Requirements in QFD with Incomplete Customer Preferences, International Journal of Advanced Manufacturing Technology, Springer-Verlag London, Vol. 65, Issue 9-12, pp. 1587-1604, doi:10.1007/s00170-012-4282-1, (2013.4).
Masato Inoue, Kai Lindow, Rainer Stark, Kenji Tanaka, Yoon-Eui Nahm and Haruo Ishikawa, Decision-Making Support for Sustainable Product Creation, Advanced Engineering Informatics, Elsevier, Vol. 26, Issue 4, pp. 782-792, doi: 10.1016/j.aei.2012.07.002, (2012.10).
Kenji Tanaka, Hiromichi Akimoto, Masato Inoue, Production Risk Management System with Demand Probability Distribution, Advanced Engineering Informatics, Elsevier, Vol. 26, Issue 1, pp. 46-54, doi:10.1016/j.aei.2011.07.002, (2012.1).
Masato Inoue, Yoon-Eui Nahm, Soshi Okawa and Haruo Ishikawa, Design Support System by Combination of 3D-CAD and CAE with Preference Set-Based Design Method, Concurrent Engineering: Research and Applications, SAGE Publications, Vol. 18, No. 1, pp. 41-53, doi:10.1177/1063293X09360833, (2010).
Masato Inoue, Koichiro Sato and Yoshiyuki Matsuoka, A Design System Referencing Morphogenesis of Organism, Selected Articles for the 1st International Conference on Design Engineering and Science, pp. 25-30, (2006).【Article for being come up for the best paper award】
Masato Inoue and Yoshiyuki Matsuoka, Simulation of Developmental Process of Organism and Application to Structural Design, Journal of Advanced Computational Intelligence & Intelligent Informatics, Vol. 9, No. 2, pp. 142-149, (2005).
Masato Inoue and Yoshiyuki Matsuoka, Evolutionary Form-Generation System Based on Emergence, The Science of Design, Vol. 48, No. 2, pp. 1-8, (2001).

Peer-Reviewed Books

Yusuke Kishita, Mitsutaka Matsumoto, Masato Inoue and Shinichi Fukushige, EcoDesign and Sustainability I: Products, Services, and Business Models (Sustainable Production, Life Cycle Engineering and Management), Springer, (2020.11).ISBN: 978-9811567780
Yusuke Kishita, Mitsutaka Matsumoto, Masato Inoue and Shinichi Fukushige, EcoDesign and Sustainability II: Social Perspectives and Sustainability Assessment (Sustainable Production, Life Cycle Engineering and Management), Springer, (2020.11).ISBN: 978-9811567742
Kazuo Hiekata, Brian Moser, Masato Inoue, Josip Stjepandić, Nel Wognum，Transdisciplinary Engineering for Complex Socio-technical Systems, IOS Press, (2019.7). ISBN 978-1-64368-021-7
Rena Kondo, Yuki Kinoshita, Tetsuo Yamada, Norihiro Itsubo and Masato Inoue,
Effects of Carbon Tax on Low-Carbon and Economic Supplier Selection for Asian Assembly Product, Technologies and Eco-innovation towards Sustainability II Eco Design Assessment and Management, Chapter 24, 377p., Springer, Edited by Allen H. Hu, Mitsutaka Matsumoto, Tsai Chi Kuo, Shana Smith, pp. 301-313, doi:10.1007/978-981-13-1196-3_24, (2019.01).
Shuho Yamada, Takumi Sugiura, Tetsuo Yamada, Stefan Bracke and Masato Inoue,
A Strategy of Providing Upgradable Product Service System for Economic and Environmental Balance, Advanced in Transdisciplinary Engineering: Transdisciplinary Engineering Methods for Social Innovation of Industry 4.0, Vol. 7, IOS Press, Edited by Margherita Peruzzini, Marcello Pellicciari, Cees Bil, Josip Stjepandić, Nel Wognum, pp. 1155-1164, doi:10.3233/978-1-61499-898-3-1155, (2018.08).
Takuya Okamoto, Mitsunobu Fujita, Takao Mori, Motohiro Tamaki, Akihiro Hayakawa and Masato Inoue,
Proposal of an Appropriate Repair Option from the View Point of Product Value, Environment Impact and Cost: Case Study of Automobile Engine, Advanced in Transdisciplinary Engineering: Transdisciplinary Engineering Methods for Social Innovation of Industry 4.0, Vol. 7, IOS Press, Edited by Margherita Peruzzini, Marcello Pellicciari, Cees Bil, Josip Stjepandić, Nel Wognum, pp. 927-935, doi:10.3233/978-1-61499-898-3-927, (2018.08).
Tetsuo Yamada, Shota Hasegawa, Yuki Kinoshita, Shuho Yamada, Masato Inoue, Christoph Rosebrock, Stefan Bracke,
Process Integration Concept for Waste Reduction among Manufacturing Planning, Modularization and Validation,
Procedia Manufacturing, Elsevier, Edited by Günther Seliger, Rafael Wertheim, Holger Kohl, Moshe Shpitalni, Anath Fischer, Volume 21, pp. 337-344, doi:10.1016/j.promfg.2018.02.129, (2018).
Stefan Bracke, Shuho Yamada, Yuki Kinoshita, Masato Inoue, Tetsuo Yamada,
Decision Making within the Conceptual Design Phase of Eco-Friendly Products,
Procedia Manufacturing, Elsevier, Edited by Günther Seliger, Volume 8, pp. 463-470, doi: 10.1016/j.promfg.2017.02.059, (2017).
Stefan Bracke, Marcin Hinz, Masato Inoue, Edoardo Patelli, Simon Kutz, Hanno Gottschalk, Berna Ulutas, Christoph Hartl, Peter Mörs, and Pasacal Bonnaud, Reliability Engineering in face of Shorten Product Life Cycles: Challenges, Technique Trends and Method Approaches to Ensure Product Reliability,
Risk, Reliability and Safety: Innovating Theory and Practice, Taylor & Francis, Edited by Lesley Walls, Matthew Revie, and Tim Bedford, pp. 2884-2891, (2017.02). ISBN: 978-1-138-02997-2
Masato Inoue, Shuho Yamada, Tetsuo Yamada, Stefan Bracke,
Product Upgradability for Satisfying Future Performance, Low Price and Environmental Loads, and Manufacturer Profitability throughout the Product Lifecycle,
Procedia CIRP, Elsevier, Edited by Günther Seliger, Volume 48, pp. 40-44, doi: 10.1016/j.procir.2016.03.015, (2016).
Stefan Bracke, Masato Inoue, Berna Ulutas,
Contribution for Analysing, Saving and Prioritising of Lessons Learned Issues Regarding Product Improvement and Future Product Generation,
Procedia CIRP, Elsevier, Edited by Günther Seliger, Holger Kohl and Jürgen Mallon, Volume 40, pp. 179-184, doi: 10.1016/j.procir.2016.01.095, (2016).
Yuki Kinoshita, Tetsuo Yamada, Surendra M. Gupta, Aya Ishigaki and Masato Inoue, Analysis of Environmental and Economic Disassembly Parts Selection by Goal Programming,
Procedia CIRP, Elsevier, Edited by Günther Seliger, Holger Kohl and Jürgen Mallon, Volume 40, pp. 162-167, doi:10.1016/j.procir.2016.01.092, (2016).
Shuho Yamada, Tetsuo Yamada, Stefan Bracke and Masato Inoue,
Upgradable Design for Reduction of Production Cost and CO₂ Emission - Case Study of a Laptop Computer, Applied Mechanics and Materials, Vol. 761, pp. 589-593, doi:10.4028/www.scientific.net/AMM.761.589, (2015.05).
Tomoyuki Urata, Tetsuo Yamada, Norihiro Itsubo and Masato Inoue,
Modeling and Balancing for Costs and CO₂ Emissions in Global Supply Chain Network among Asian Countries,
Procedia CIRP, Elsevier, Edited by Günther Seliger and Noordin Mohd. Yusof, Volume 26, pp. 664-669, doi: 10.1016/j.procir.2014.07.107, (2015.03).
Tetsu Kawasaki, Tetsuo Yamada, Norihiro Itsubo and Masato Inoue,
Multi Criteria Simulation Model for Lead Times, Costs and CO₂ Emissions in Low-Carbon Supply Chain Network,
Procedia CIRP, Elsevier, Edited by Gunther Seliger and Noordin Mohd. Yusof, Volume 26, pp. 329-334, doi: 10.1016/j.procir.2014.07.182, (2015.03).
Masato Inoue, Shuho Yamada, Tetsuo Yamada and Stefan Bracke,
A Design Method for Product Upgradability with Different Customer Demands,
Product Lifecycle Management for Global Market, Series: IFIP Advances in Information and Communication Technology, Vol. 442, Springer, Edited by Shuichi Fukuda, Alain Bernard, Balan Gurumoorthy, and Abdelaziz Bouras, pp. 91-100, (2015).
Stefan Bracke, Masato Inoue, Berna Ulutas and Tetsuo Yamada,
CDMF-RELSUS concept: Reliable and Sustainable products - Influences on design, manufacturing, layout integration and use phase,
Procedia CIRP, Elsevier, Edited by Terje K. Lien, Volume 15, pp. 8-13, doi: 10.1016/j.procir.2014.06.083, (2014). ISSN 2212-8271
Masato Inoue, Yoon-Eui Nahm, Kenji Tanaka and Haruo Ishikawa,
Decision-Making Support for Selection of Design Ideas at the Early Phase of Structural Design,
Concurrent Engineering Approaches for Sustainable Product Development in a Multi-Disciplinary Environment,
Springer London, Edited by Josip Stjepandic, Georg Rock, Cees Bil, Volume 1, pp. 521-532, doi: 10.1007/978-1-4471-4426-7_45, (2013). ISBN 978-1-4471-4425-0
Kai Lindow, Robert Woll, Masato Inoue, Haruo Ishikawa and Rainer Stark,
Approaches for Sustainability Assessment in the Conceptual Design Phase,
Sustainable Product Development,
Springer-Verlag London, Edited by Amaresh Chakrabarti, Chapter 36, pp. 377-387, doi: 10.1007/978-1-4471-4507-3_36, (2012.11). ISBN 978-1-4471-4506-6
Tetsu Murakami, Masato Inoue, Yoon-Eui Nahm and Haruo Ishikawa,
An Upgrade Design Method for Environmental Issues Based on the Concept of Set-Based Design,
Design for Innovative Value Towards a Sustainable Society,
Springer-Verlag, Edited by Mitsutaka Matsumoto, Yasushi Umeda, Shinichi Fukushige, pp. 500-505, (2011).
ISBN 978-94-007-3010-6
Masato Inoue, Reona Mogi, Yoon-Eui Nahm and Haruo Ishikawa
Design Support for "Suriawase": Japanese Way for Negotiation among Several Teams,
Improving Complex Systems Today,
Springer-Verlag, Edited by Dan Frey, Shuichi Fukuda and Georg Rock, pp. 385-392, (2011).
ISBN 0-85729-798-8
Masato Inoue, Kai Lindow, Rainer Stark and Haruo Ishikawa
Preference Set-Based Design Method for Sustainable Product Creation,
New World Situation: New Directions in Concurrent Engineering,
Springer-Verlag, Edited by Jerzy Polojski, Shuichi Fukuda and Jozef Salwinski, pp. 387-394, (2010).
ISBN 0-85729-023-6
Masato Inoue, Yoon-Eui Nahm and Haruo Ishikawa
The Set-Based Multi-Objective Satisfactory Design for the Initial Design with Uncertainties in Collaborative Engineering,
Global Perspective for Competitive Enterprise, Economy and Ecology,
Springer-Verlag, Edited by Shuo-Yan Chou, Amy Trappey, Jerzy Polojski and Shana Smith, pp. 381-388, (2009).
ISBN 1-84882-761-5
Masato Inoue and Haruo Ishikawa
Set-Based Design Method Reflecting the Different Designers' Intentions,
Competitive Design,
Cranfield University Press, Edited by Rajkumar Roy and Essam Shehab, pp. 404-411, (2009).
ISBN 0-9557436-4-1
Masato Inoue, Yumiko Takashima and Haruo Ishikawa
Evaluation of Environmental Loads Based on 3D-CAD,
Collaborative Product and Service Life Management for a Sustainable World,
Springer-Verlag, Edited by Richard Curran, Shuo-Yan Chou, and Amy Trappey, pp. 585-592, (2008).
ISBN 1-84800-971-4
Masato Inoue and Yoshiyuki Matsuoka, Form-Generation System Imitating the Developmental Process of Organism for Obtaining Diverse Design Solutions, Computer-Based Design, Professional Engineering Publishing, Edited by T. M. M. Shahin, pp. 327-336, (2002).
ISBN 1-86058-372-5

International Peer-Reviewed Conference Papers

Kenichiro Kamimura, Yuki Komatsu, Kentaro Fujiwara, Shuho Yamada and Masato Inoue, Design Support System for Product Architecture Considering Multi-Generational Use, Proceedings of EcoDesign (EcoDesign 2023), Nara Prefectural Convention Center, (2023.11.29-12.3)
Suki Ueda, Reo Sato, Mitsunobu Fujita, Takao Mori, Shuho Yamada, Akihiro Hayakawa and Masato Inoue, Repair Options in Terms of Product Value, Environmental Impact, and Cost for Automobile User, Proceedings of EcoDesign (EcoDesign 2023), Nara Prefectural Convention Center, (2023.11.29-12.3)
Yo Otsuka, Mamiko Sakuragi and Masato Inoue, A User-Centered Design Method Based on Evaluation Grid Method and Rough Sets, Proceedings of International Conference on Design and Concurrent Engineering 2023 & Manufacturing Systems Conference 2023 (JSME iDECON/MS2023) , Keio University, (2023.9.2)
Jaeho Han, Hiromasa Ijuin, Tetsuo Yamada, Shuho Yamada and Masato Inoue, Environmental and Economical Design Problem of Upgrading and Remanufacturing Option Selection, Proceedings of EcoDesign (EcoDesign 2021), online oral presentation, (2021.12.1-3)
Stefan Bracke, Alicia Puls and Masato Inoue, COVID-19 pandemic: Analyzing of Restrictions, Medical Care and Prevention Measures in Germany and Japan, European Safety and Reliability (ESREL 2021), Angers, FRANCE, (2021.9.19-23)
Kentaro Fujiwara, Shogo Miyajima, Rina Hasebe, Shuho Yamada, Tetsuo Yamada, and Masato Inoue, Upgrade Planning and Architectural Design Methods for Multi-Generational Use, 10th International Conference on Design and Concurrent Engineering (iDECON 2021), Chiba, JAPAN (online oral presentation), (2021.9.4)
Mamiko Sakuragi, Rimpei Yamaguchi, Tomoya Ishikawa, and Masato Inoue, User-Oriented Kansei Design Method Based on Evaluation Grid Method, 10th International Conference on Design and Concurrent Engineering (iDECON 2021), Chiba, JAPAN (online oral presentation), (2021.9.3)
Jaeho Han, Hiromasa Ijuin, Tetsuo Yamada, Shuho Yamada, and Masato Inoue, Problem of Remanufacturing Option Selection with Disassembly for CO₂ Saving Rate and Cost, Northeast Decision Sciences Institute 2021 Annual Conference (NEDSI 2021), Virtual Conference (2021.3.26-27)
Tomoya Ishikawa, Rimpei Yamaguchi, Shuho Yamada, and Masato Inoue, Design Method for Deriving Suitable Design Solution Reflected Sensitivity Information: Case Study of Sound Signal at Traffic Lights, 9th International Conference on Design and Concurrent Engineering (iDECON 2020), Kota Kinabalu, MALAYSIA (online oral presentation), (2020.9.21-22)
Rina Hasebe, Shuho Yamada, Tetsuo Yamada, and Masato Inoue, Development of Product Architecture and an Associated Supply Chain Decision Support System Considering Quality, Procurement Cost, Transportation Lead Time, and Environmental Load, 9th International Conference on Design and Concurrent Engineering (iDECON 2020), Kota Kinabalu, MALAYSIA (online oral presentation), (2020.9.21-22)
Yota Kondo, Tatsuya Karube, Yuta Onoda, Zenichi Miyagi, Shuho Yamada, and Masato Inoue, Uncertain Design Based on Robust Design Method (Application to Design of T-Peel Test Apparatus), 9th International Conference on Design and Concurrent Engineering (iDECON 2020), Kota Kinabalu, MALAYSIA (online oral presentation), (2020.9.21-22)
Ibuki Kato, Takayuki Nakajima, Shuho Yamada, and Masato Inoue, Universal Design Method Considering Physical Characteristics and Physical Load Based on Digital Human Model: Case Study of Height-Adjustable Standing Table, 9th International Conference on Design and Concurrent Engineering (iDECON 2020), Kota Kinabalu, MALAYSIA (online oral presentation), (2020.9.21-22)
Yamada Shuho, Miyajima Shogo, Hasebe Rina, Yamada Tetsuo, Bracke Stefan and Masato Inoue, Decision Support Method for Planning Upgrade Cycle and Designing Product Architecture of Upgradable Product Service System, Proceedings of EcoDesign (EcoDesign 2019), Yokohama, (2019.11.25-27)
Shun Kobayashi, Mitsunobu Fujita, Takao Mori, Junji Sugimoto, Akihiro Hayakawa and Masato Inoue, Adequacy Assessment of Automobile Repair Option for Product Value, Environmental Impact and Cost: Case Study of Automobiles Starter Motor, Proceedings of EcoDesign (EcoDesign 2019), Yokohama, (2019.11.25-27)
Tatsuya Karube, Yuka Mizukura, Nobuki Sato, Yuta Onoda, Zenichi Miyagi, and Masato Inoue, A Robust Design Method Based on Evaluation Index in Consideration of Designer's Intention, International Conference on Design and Concurrent Engineering (iDECON 2019), Sendai (2019.9.23-24)
Rimpei Yamaguchi, Masaki Kawaguchi, Shota Yamazaki, Shuho Yamada, and Masato Inoue, A Design Method for Deriving Non-Existent Design Solution with Diverse User Requirements: Case Study of Mechanical Pencils, International Conference on Design and Concurrent Engineering (iDECON 2019), Sendai (2019.9.23-24)
Tomoaki Yatsuka, Aya Ishigaki, Yuki Kinoshita, Tetsuo Yamada, and Masato Inoue, Effect of Robust Optimization Approach on Multi-Player Multi-Objective Production Planning Problem Using Linear Physical Programming, 16th International Logistics and Supply Chain Congress, pp. 137-143, Denizli, TURKEY (2018.10.18-20)
Shogo Miyajima, Shuho Yamada, Tetsuo Yamada, and Masato Inoue, Proposal of a Modular Design Method Considering Supply Chain (Comprehensive Evaluation by Environment Load, Cost, Quality, and Lead Time), International Conference on Design and Concurrent Engineering (iDECON 2018), Kuching, MALAYSIA (2018.9.17-18)【Best Paper Award】
Takayuki Nakajima, Masato Shimada, and Masato Inoue, A Universal Design Method that Considers Physical Burden through the Application of a Digital Human Model: Case Study of a Working Table, International Conference on Design and Concurrent Engineering (iDECON 2018), Kuching, MALAYSIA (2018.9.17-18)
Stefan Bracke and Masato Inoue, Reliability and Safety Engineering: The Principles Innovation and Optimisation of German and Japanese Product Constructions, European Safety and Reliability (ESREL 2018), Trondheim, NORWAY , (2018.6.17-21)
Stefan Bracke, Marcin Hinz, C. van Gulijk, F. Gronwald, M. Muenker, Masato Inoue, Shuho Yamada, E. Patelli, Berna Ulutas, M. Bonato, Tetsuo Yamada, Reliability Engineering Based on Operating Data and Monitoring Systems within Technical Products: Challenges, Requirements and Approaches, European Safety and Reliability (ESREL 2018), Trondheim, NORWAY, (2018.6.17-21)
Tomoaki Yatsuka, Aya Ishigaki, Hiromasa Ijuin, Yuki Kinoshita, Tetsuo Yamada, and Masato Inoue, Mathematical Modeling of Multi-player Multi-objective Decision Making by Linear Physical Programming, IIAI International Congress on Advanced Applied Informatics (IIAI AAI 2018), Yonago (2018.7.8-13)【Outstanding Paper Award】
Kento Igarashi, Tetsuo Yamada, Norihiro Itsubo, and Masato Inoue, Comparison between Different Products by Disassembly System Design with Parts Selection for Cost, Recycling and CO₂ Saving Rates using Multi-Criteria Optimization, 3rd International Conference on Business Management of Technology (BMOT2018), Yonago (2018.7.8-12)
Tomoaki Yatsuka, Riku Yamagata, Aya Ishigaki, Hiromasa Ijuin, Yuki Kinoshita, Tetsuo Yamada, and Masato Inoue, Design of Multi-Player Multi-Objective Decision Making Support System Using a Linear Physical Programming Approach, Northeast Decision Sciences Institute 2018 Annual Conference (NEDSI 2018), USA (2018.4.12-14)【Best Poster Award, 3rd】
Yuki Kinoshita, Tetsuo Yamada, Surendra M. Gupta, Aya Ishigaki, and Masato Inoue, Material Selection for Cost, Disposal Weight and GHG Emissions by Linear PhysicalL Programming, Northeast Decision Sciences Institute 2018 Annual Conference (NEDSI 2018), USA (2018.4.12-14)
Rena Kondo, Yuki Kinoshita, Tetsuo Yamada, and Masato Inoue, Effects of Different Carbon Tax among Asian Coutries on Low-Carbon and Economic Supplier Selection, Northeast Decision Sciences Institute 2018 Annual Conference (NEDSI 2018), USA (2018.4.12-14)
Tetsuo Yamada, Shota Hasegawa, Yuki Kinoshita, Shuho Yamada, Masato Inoue, Christoph Rosenbrock and Stefan Bracke, Process Integration Concept for Waste Reduction among Manufacturing Planning, Modularization and Validation, 15th Global Conference on Sustainable Manufacturing (GCSM 2017), Haifa, ISRAEL (2017.9.25-27)
Chise Shibata, Shuho Yamada, Tetsuo Yamada, Stefan Bracke, and Masato Inoue, Proposal of A Component Upgradability Indicator from Comprehensive Perspectives (Case Study of Laptop Modules), The 4th International Conference on Design Engineering and Science (ICDES2017), Aachen, GERMANY (2017.9.17-19).
Ryosuke Okada, Yoshiaki Murata, and Masato Inoue, A Method of Selecting a Principle Solution Variant at the Conceptual Design Phase Based on Set-Based Design, International Conference on Design and Concurrent Engineering 2017 (iDECON 2017), Osaka (2017.9.7).
Chise Shibata, Shuho Yamada, Tetsuo Yamada, Stefan Bracke, and Masato Inoue, Proposal of an Adaptability Evaluation Indicator for Component’s Life Cycle Options from Environmental, Economical, Functional and Reliable Perspectives, International Conference on Design and Concurrent Engineering 2017 (iDECON 2017), Osaka (2017.9.7).
Stefan Bracke, Bianca Backes, Edoardo Patelli, Masato Inoue, Shuho Yamada, Berna Ulutas, Christoph Hartl, Peter Dültgen, Marek Młyńczak, Gürsel Suel, Challenges, Trends and Approaches of Future Reliability Engineering in High Precision Manufacturing Processes, 24th International Conference on Production Research (ICPR 2017), Poznan, POLAND (2017.7.30-8.3)
Shota Hasegawa, Yuki Kinoshita, Tetsuo Yamada, Masato Inoue and Stefan Bracke, Disassembly Parts Selection for Recovery Rate and Cost Considering Reuse, 24th International Conference on Production Research (ICPR 2017), Poznan, POLAND (2017.7.30-8.3)
Kengo Nakamura, Hiromasa Ijuin, Tetsuo Yamada, Aya Ishigaki, and Masato Inoue, Effect of Material Prices for Global Supply Chain Network with Trans-Pacific Partnership, 6th International Congress on Advanced Applied Informatics (AAI 2017), Hamamatsu (2017.7.9-13)
Hiromasa Ijuin, Yuki Kinoshita, Tetsuo Yamada, Aya Ishigaki, and Masato Inoue, Liner Physical Programming Oriented Approach of Reverse Supply Chain Network Design for Costs and Recycling Rate, 6th International Congress on Advanced Applied Informatics (AAI 2017), Hamamatsu (2017.7.9-13)
Yuki Kinoshita, Tetsuo Yamada, Surendra M. Gupta, Aya Igarashi, and Masato Inoue, Environmentally Friendly and Economical Design Alternatives by Material Selection between Assembly and Disassembly Systems, Northeast Decision Sciences Institute 2017 Annual Conference, USA (2017.3.22-25)
Rena Kondo, Yuki Kinoshita, Tetsuo Yamada, Norihiro Itsubo, and Masato Inoue, Analysis of Material Based GHG Emissions and Costs for Assembly Products Using Asian Lifecycle Inventory Databases: Cell Phone Case Study, The 24th CIRP Conference on Life Cycle Engineering (CIRP LCE 2017), Kamakura, (2017.3.8-10)
Yoshiaki Murata, Masaki Takahashi, Yosuke Takeuchi and Masato Inoue, A Design Method Obtaining Diverse Design Solution Sets for the Boundary Condition Change: Application to an Isolation System, Asia Design Engineering Workshop 2016 (A-DEWS 2016), Osaka, JAPAN (2016.12.12-14)
Yuki Kinoshita, Tetsuo Yamada, Surendra M. Gupta, Aya Igarashi, and Masato Inoue, Environmental and Economic Disassembly Parts Selection Design for Recycling, CO₂ Saving Rates and Cost by Goal Programming, The 18th International Conference on Industrial Engineering (IJIE2016), Seoul, Korea (2016.10.10-12)
Masato Inoue, Sota Takahashi, Mitsunobu Fujita, Takao Mori, Motohiro Tamaki, Junji Sugimoto, Katsumi Ishizuka, Katsumi Oppata, Shigeyuki Suzuki, Kenroku Kobayashi, Hironori Tani and Akihiro Hayakawa, A Case Study in Quantitative Estimation of the CO₂-Emissions Reduction from 50 Major Reuse Parts for Japanese Automobile based on Data of Vehicle Inspection Certificate, The 12th Biennial International Conference on EcoBalance (EcoBalance 2016), Kyoto, JAPAN (2016.10.3-6)
Hiromasa Ijuin, Tetsuo Yamada, Aya Igarashi, and Masato Inoue, Reverse Supply Chain Flows with Material Recovery Constraint, The 12th Biennial International Conference on EcoBalance (EcoBalance 2016), Kyoto, JAPAN (2016.10.3-6)
Stefan Bracke, Shuho Yamada, Yuki Kinoshita, Masato Inoue and Tetsuo Yamada, Decision Process within the Conceptual Design Phase of Eco-Friendly Products, 14th Global Conference on Sustainable Manufacturing (GCSM 2016), Cape Town, SOUTH AFRICA (2016.10.2-9)
Stefan Bracke, Simon Kutz, Masato Inoue, Hanno Gottschalk, Marcin Hinz, Edoardo Patelli, Christoph Hartl, Berna Ulutas, Pasacal Bonnaud, and Peter Mörs, Reliability Engineering in face of Shorten Product Life Cycles: Challenges, Technique Trends and Method Approaches to Ensure Product Reliability, European Safety and Reliability (ESREL 2016), Glasgow, UK (2016.9.25-29)
Wataru Suzuki, Masato Shimada, Shuho Yamada and Masato Inoue, Set-Based Universal Design Method Considering with User Requirements Variability: Case Study of a Mechanical Pencil, International Conference on Design and Concurrent Engineering (iDECON 2016), Pulau Langkawi, MALAYSIA (2016.9.19-21)
Masato Shimada, Wataru Suzuki, Shuho Yamada and Masato Inoue, Proposal of a Universal Design Method for Reflecting Physical Characteristics of Diverse Users: Case Study of a Bicycle Frame, International Conference on Design and Concurrent Engineering (iDECON 2016), Pulau Langkawi, MALAYSIA (2016.9.19-21)
Masato Shimada, Wataru Suzuki, Shuho Yamada and Masato Inoue, A Universal Design Method for Reflecting Physical Characteristics Variability: Case Study of a Bicycle Frame, Universal Design 2016 (UD2016), York, UK (2016.8.21-24).
Masato Inoue, Shuho Yamada, Tetsuo Yamada and Stefan Bracke, Product Upgradability for Satisfying Future Performance, Low Price and Environmental Loads, and Manufacturer Profitability throughout the Product Lifecycle, 23rd CIRP Conference on Life Cycle Engineering (CIRP LCE 2016), Berlin, GERMANY (2016.5.22-24).
Yuki Kinoshita, Tetsuo Yamada, Surendra M. Gupta, Aya Igarashi, Norihiro Itsubo and Masato Inoue, Disassembly Parts Selection for Environmental Loads Cost by Goal Programming, Northeast Decision Sciences Institute 2016 Annual Conference, Alexandria, USA (2016.3.31-4.2)
Hiromasa Ijuin, Tetsuo Yamada, Aya Igarashi, and Masato Inoue, Modeling and Analysis of Reverse Supply Chain Network with End-of-Life Product Status for Costs and Recycling Rate, Northeast Decision Sciences Institute 2016 Annual Conference, Alexandria, USA (2016.3.31-4.2)
Shuho Yamada, Tetsuo Yamada, Stefan Bracke and Masato Inoue, Satisficing Design Method for Sustainable Performance, Profitability for Manufacturer and Reduction of Environmental Loads, Proceedings of EcoDesign 2015 International Symposium, Tokyo, JAPAN, pp. 392-396, (2015.12.2)
Yuki Kinoshita, Tetsuo Yamada, Surendra M. Gupta, Aya Ishigaki and Masato Inoue, Disassembly Parts Selection for Recycling Rate and Cost by Goal Programming, The 3rd International Workshop on Production and Logistics, Kusatsu, JAPAN (2015.10.31-11/1)
Stefan Bracke, Masato Inoue and Berna Ulutas, Contribution for Analysing, Saving and Prioritising of Lessons Learned Issues Regarding Product Improvement and Future Product Generations, 13th Global Conference on Sustainable Manufacturing (GCSM 2015), Ho Chi Minh City, VIETNAM (2015.9.16-17)
Yuki Kinoshita, Tetsuo Yamada, Surendra M. Gupta, Aya Ishigaki and Masato Inoue, Analysis of Environmental and Economic Disassembly Parts Selection by Goal Programming, 13th Global Conference on Sustainable Manufacturing (GCSM 2015), Ho Chi Minh City, VIETNAM (2015.9.16-17)
Yosuke Takeuchi, Masaki Takahashi, Shunsuke Iijima, Yoshiaki Murata and Masato Inoue, Set-Based Design for Obtaining Multi-Objective Satisfactory Solutions Based on Dynamic Simulations, International Conference on Design and Concurrent Engineering (iDECON 2015), Tokushima, JAPAN (2015.9.6-7)
Wataru Suzuki, Yosuke Takeuchi and Masato Inoue, Set-Based Universal Design for Obtaining Diverse Solution Sets Based on Physical Characteristics Variability: Case Study of a Train Strap, International Conference on Design and Concurrent Engineering (iDECON 2015), Tokushima, JAPAN (2015.9.6-7)
Sota Takahashi, Masato Iwasaki, Mitsunobu Fujita, Takao Mori, Motohiro Tamaki, Akihiko Sano, Sigeyuki Suzuki, Kenroku Kobayashi, Hironori Tani, Akihiro Hayakawa and Masato Inoue, Quantitative Estimation of the CO₂-Emissions Reduction from Reuse Automobile Parts, International Conference on Design and Concurrent Engineering (iDECON 2015), Tokushima, JAPAN (2015.9.6-7)
Tomoyuki Urata, Tetsuo Yamada, Norihiro Itsubo, and Masato Inoue, An Asian Global Supply Chain Network Design for Lower Material Based CO₂ Emissions and Costs, 23rd International Conference for Production Research (ICPR23), Manila, PHILIPPINES (2015.8.5).【Outstanding Paper Award】
Yuki Kinoshita, Tetsuo Yamada, Surendra M. Gupta, Aya Ishigaki and Masato Inoue, Disassembly System Design with Environmental and Economic Parts Selection Using Goal Programming, International Conference on Remanufacturing (ICoR2015), pp. 219-226, Amsterdam, NETHERLANDS (2015.6.15).
Yuki Kinoshita, Tetsuo Yamada, Surendra M. Gupta, and Masato Inoue, A Multi-Objective Problem for Product and System Design in Assembly and Disassembly, Northeast Decision Sciences Institute 2015 Annual Conference, Cambrige, USA (2015.3.20-22).
Shuho Yamada, Tetsuo Yamada, Katsuyuki Nakano, Stefan Bracke and Masato Inoue, An Environmental Conscious Product Design Method for Sustainability of the Product's Value, Going Green - CARE INNOVATION 2014, Vienna, AUSTRIA (2014.11.18)
Yuta Yoshizaki, Tetsuo Yamada, Norihiro Itsubo and Masato Inoue, Low-carbon and Economic Supplier Selection among Multiple Asian Countries with Estimation of GHG Emissions and Cost for Parts Production, The 1st East Asia Workshop on Industrial Engineering (EAWIE), Hiroshima, JAPAN (2014.11.8).
Shuho Yamada, Tetsuo Yamada, Stefan Bracke and Masato Inoue, Upgradable Design for Reduction of Production Cost and CO₂ Emission - Case Study of a Laptop Computer, 3rd International Conference on Design and Concurrent Engineering (iDECON 2014) @ Melaka, MALAYSIA (2014.9.22-23)
Tetsuo Yamada, Yuta Yoshizaki, Norihiro Itsubo and Masato Inoue, Low-Carbon and Economic Supplier Selection Using Life Cycle Inventory Database by Asian International Input-Output Tables, 12th Global Conference on Sustainable Manufacturing (GCSM 2014), Johor Bahru, MALAYSIA (2014.9.22-24)
Tomoyuki Urata, Tetsuo Yamada, Norihiro Itsubo and Masato Inoue, Modeling and Balancing for Costs and CO2 Emissions in Global Supply Chain Network among Asian Countries, 12th Global Conference on Sustainable Manufacturing (GCSM 2014), Johor Bahru, MALAYSIA (2014.9.22-24)
Tetsu Kawasaki, Tetsuo Yamada, Norihiro Itsubo and Masato Inoue, Multi Criteria Simulation Model for Lead Times, Costs and CO₂ Emissions in Low-Carbon Supply Chain Network between Malaysia, China and Japan, 12th Global Conference on Sustainable Manufacturing (GCSM 2014), Johor Bahru, MALAYSIA (2014.9.22-24)
Shuho Yamada, Tetsuo Yamada, Stefan Bracke and Masato Inoue, An Upgrade Product Design Method for Satisfying Performance Criteria, Environment Load and Cost, The 3rd International Conference on Design Engineering and Science (ICDES2014), pp. 174-179, Pilsen, CZECH (2014.8.31-9.3)
Masato Iwasaki, Mitsunobu Fujita, Takao Mori, Akihiko Sasaki, Motohiro Tamaki, Akihiko Sano, Hironori Tani, Akihiro Hayakawa and Masato Inoue, Environmental Load Evaluation of Reuse Parts for Automobiles, The 3rd International Conference on Design Engineering and Science (ICDES2014), pp. 27-30, Pilsen, CZECH (2014.8.31-9.3)
Shunsuke Iijima, Masaki Takahashi and Masato Inoue, Design Method for Obtaining Diverse Possible Design Solution Sets to Adapt to Changes in Boundary Conditions, The 3rd International Conference on Design Engineering and Science (ICDES2014), pp. 180-185, Pilsen, CZECH (2014.8.31-9.3)
Masato Inoue, Shuho Yamada, Tetsuo Yamada and Stefan Bracke, Upgradable Design for Various User Demands, 11th International Conference on Product Lifecycle Management (PLM 14), Yokohama, JAPAN (2014.7.7-9)
Stefan Bracke, Masato Inoue, Berna Ulutas and Tetsuo Yamada, CDMF-RELSUS concept: Reliable and Sustainable products - Influences on design, manufacturing, layout integration and use phase, 21st CIRP Conference on Life Cycle Engineering (CIRP LCE 2014), Trondheim, NORWAY (2014.6.18-20).
Kento Igarashi, Tetsuo Yamada, Masato Inoue, Norihiro Itsubo and Surendra M Gupta, Multi Criteria Optimization Model for Disassembly Cost, Recycling Rate and Carbon Emissions, 44th Decision Sciences Institute Annual Meeting 2013, Baltimore, USA (2013.11.16-19)
Jens Michalski, Tetsuo Yamada, Masato Inoue and Stefan Bracke, CDMF-RELSUS Concept: Reliable Products are Sustainable Products - Automotive Case Study "Clutch", Proceedings of 11th Global Conference on Sustainable Manufacturing -Innovative Solutions, pp. 403-407, Berlin, GERMANY (2013.9.23-25). ISBN: 978-3-7983-2609-5
Masato Inoue, Masaki Takahashi and Haruo Ishikawa, A Design Method for Unexpected Circumstances: Application to an Active Isolation System, Proceedings of 20th ISPE International Conference on Concurrent Engineering, pp. 155-162, IOS Press, Melbourne, AUSTRALIA (2013.9.4). doi: 10.3233/978-1-61499-302-5-155
Tomoyuki Urata, Tetsuo Yamada, Norihiro Itsubo and Masato Inoue, An Optimal Design for Global Supply Chain Network Considering CO₂ Emissions of Part Production, International Symposium on Scheduling 2013 (ISS2013), pp. 190-195, Tokyo, JAPAN (2013.7.20).
Yuta Yoshizaki, Tetsuo Yamada, Norihiro Itsubo and Masato Inoue, Low-Carbon Supplier Selection Using Life Cycle Inventory Database in China and Japan, International Symposium on Scheduling 2013 (ISS2013), pp. 184-189, Tokyo, JAPAN (2013.7.20).
Tetsuo Yamada, Kento Igarashi, Norihiro Itsubo and Masato Inoue, Disassembly System Design with Optimal Environmental and Economic Parts Selection Using Life Cycle Inventory Database by Input-Output Tables, Northeast Decision Sciences Institute, 2013 Annual Conference, pp. 873-878, Brooklyn, New York, USA (2013.4.5-7).
Kento Igarashi, Tetsuo Yamada and Masato Inoue, Optimal Design of Disassembly System with Environmental and Economic Parts Selection using Recyclability Evaluation Method, The 13th Asia Pacific Industrial Engineering and Management Systems Conference, Patong Beach, Phuket, Thailand (2012.12.2-5).【The Best Student Paper Award】
Nobuyoshi Ishibai, Masato Inoue, Wataru Yamamoto, Kazuyuki Suzuki and Haruo Ishikawa, Study of Achieving the Performance for ECE-R29_03 Regulation, DEKRA Symposium Safety of Commercial Vehicles, Stuttgart, Germany (2012.11.8-9).
Tetsuo Yamada, Yusuke Suzuki, Tadayuki Masui, Norihiro Itsubo and Masato Inoue, Disassembly System Design with Environmental and Economic Parts Selection Using Life Cycle Inventory Database by Input-Output Tables, 10th Global Conference on Sustainable Manufacturing, Istanbul, TURKEY (2012.10.31-11.2).
Stefan Bracke, Jens Michalski, Masato Inoue and Tetsuo Yamada, CDMF-RELSUS Concept: Reliable Products are Sustainable Products - Influences on Product Design, Manufacturing and Use Phase, 10th Global Conference on Sustainable Manufacturing, Istanbul, TURKEY (2012.10.31-11.2).【Keynote Speech】
Masato Inoue, Yoon-Eui Nahm, Kenji Tanaka and Haruo Ishikawa, Decision-Making Support for Selection of Design Ideas at the Early Phase of Structural Design, 19th ISPE International Conference on Concurrent Engineering, Trier, GERMANY (2012.9.3-7).
Kento Igarashi, Tetsuo Yamada, Masato Inoue, Disassembly System Design with Environmental and Economic Parts Selection using Recyclability Evaluation Method, International Symposium on Reliability Engineering and Risk Management (ISRERM 2012), Yokohama, JAPAN (2012.8.5-8).
Kai Lindow, Robert Woll, Masato Inoue, Haruo Ishikawa and Rainer Stark, Approaches for Sustainability Assessment in the Conceptual Design Phase, 22nd CIRP Design Conference, Bangalore, INDIA (2012.3.28-30).【One of the most Distinguished Papers】
Tetsu Murakami, Masato Inoue, Yoon-Eui Nahm and Haruo Ishikawa, An Upgrade Design Method for Environmental Issues Based on the Concept of Set-Based Design, Proceedings of EcoDesign 2011 International Symposium, pp. 500-505, (2011).
Masato Inoue, Reona Mogi, Yoon-Eui Nahm and Haruo Ishikawa
Design Support for "Suriawase": Japanese Way for Negotiation among Several Teams, 18th ISPE International Conference on Concurrent Engineering, pp. 385-392, (2011).
Masato Inoue, Yutaka Hattori and Haruo Ishikawa, Set-Based Design Method for the Early Phase Design of Structures with Uncertainties, 2010 ASME International Mechanical Engineering Congress & Exposition, DVD (No. IMECE2010-40984), (2010).
ISBN 0-7918-3891-4
Masato Inoue, Kai Lindow, Rainer Stark and Haruo Ishikawa, Preference Set-Based Design Method for Sustainable Product Creation, 17th ISPE International Conference on Concurrent Engineering, pp. 387-394, (2010).
Masato Inoue, Kai Lindow, Rainer Stark and Haruo Ishikawa, Application of Sustainable Aspects to the Set-Based Design Method, Design Conference 2010, CD-ROM, (2010).
Tetsuo Yamada, Masato Inoue, Haruo Ishikawa and Kenji Yura, Collaborative Disassembly Evaluation by Product and System Design with PLM, Proceedings of the 7th CIRP Conference on Sustainable Manufacturing, CD-ROM(No. 57), (2009).
Haruo Ishikawa and Masato Inoue, Set-Based FEM for Product Design with Uncertainties, 2009 ASME International Mechanical Engineering Congress & Exposition, (2009).
Masato Inoue, Yoon-Eui Nahm and Haruo Ishikawa, The Set-Based Multi-Objective Satisfactory Design for the Initial Design with Uncertainties in Collaborative Engineering, 16th ISPE International Conference on Concurrent Engineering, pp. 381-388, (2009).
Masato Inoue and Haruo Ishikawa, Set-Based Design Method Reflecting the Different Designers' Intentions, Proceedings of the 19th CIRP Design Conference, pp. 404-411, (2009). 【Invited paper】
Masato Inoue and Haruo Ishikawa, Finite Element Method as a Method of Product Design with Uncertainties for Sustainable Industrial Growth, 6th Global Conference on Sustainable Product Development and Life Cycle, pp. 195-199, (2008).
Masato Inoue, Yumiko Takashima and Haruo Ishikawa, Evaluation of Environmental Loads Based on 3D-CAD, Proceedings of 15th ISPE International Conference on Concurrent Engineering, pp. 585-562, (2008).
Kenji Yura, Masato Inoue, Masahiro Ishii, Haruo Ishikawa, Kouichi Morishige, Masayuki Takata, Shunji Umetani and Tetsuo Yamada, Information Architecture for Environment-Conscious and Enduser-Oriented PLM, Proceedings of EcoDesign 2007, (2007).
Jumpei Furuya, Yumiko Takashima, Masato Inoue and Haruo Ishikawa, A Design System of Evaluation for Environmental Loads Based on 3D-CAD, Proceedings of 5th Global Conference on Sustainable Product Development and Life Cycle, (2007).
Haruo Ishikawa, Masato Inoue and Yoon-Eui Nahm, A Preference Set-Based Design Method for Life Cycle Assessment, Proceedings of 4th Global Conference on Sustainable Product Development and Life Cycle, CD-ROM(No. 49), (2006).
Tetsuo Yamada, Masato Inoue, Masahiro Ishii, Haruo Ishikawa, Kouichi Morishige, Masayuki Takata, Shunji Umetani and Kenji Yura, A Framework for Environment-Conscious and Enduser-Oriented PLM, Proceedings of the 4th Global Conference on Sustainable Product Development and Life Cycle, CD-ROM(No. 85), (2006).
Masato Inoue, Koichiro Sato and Yoshiyuki Matsuoka, A Design System Referencing Morphogenesis of Organism, Proceedings of the 1st International Conference on Design Engineering and Science, CD-ROM, (2005).
Shigeru Tao, Masato Inoue and Yoshiyuki Matsuoka, Architectural Design Method Based on a Hierarchical Design Model, Proceedings of the International Design Congress 2005, CD-ROM, (2005).
Yoshiyuki Matsuoka and Masato Inoue, Emergent Form-Generation System, Proceedings of 11th International Conference on Machine Design and Production, CD-ROM, (2004).
Masato Inoue and Yoshiyuki Matsuoka, Simulation of Developmental Process of Organism and Application to Structural Design, Proceedings of Joint 2nd International Conference on Soft computing and Intelligent Systems and 5th International Symposium on Advanced Intelligent Systems, CD-ROM, (2004).
Masato Inoue and Yoshiyuki Matsuoka, Support for Obtaining Satisfactory Design Solutions of Form and Structure by Applying the Emergent Form-Generation System, Journal of 6th Asian Design Conference, CD-ROM, (2003).
Masato Inoue and Yoshiyuki Matsuoka, Form-Generation System for Obtaining Diverse Design Solutions Supporting Early Process of Design in Structural Design, Proc. 2003 ASME International Design Engineering Technical Conferences and the Computers and Information in Engineering Conference, CD-ROM, (2003).
Masato Inoue and Yoshiyuki Matsuoka, Form-Generation System Imitating the Developmental Process of Organism for Obtaining Diverse Design Solutions, Proceedings of Engineering Design Conference 2002, pp. 327-336, (2002).
Masato Inoue and Yoshiyuki Matsuoka, Emergent Form-Generation System Using Cellular Automata and Genetic Algorithm, Bulletin of 5th Asian Design Conference, CD-ROM, (2001).
Masato Inoue and Yoshiyuki Matsuoka, Evolutionary Form-Generation System Using "Element Generation Method", Proceedings of 9th International Conference on Machine Design and Production, CD-ROM, (2000).

Invited Paper/Lecture (English)

Masato Inoue, Shogo Miyajima, Shuho Yamada and Tetsuo Yamada, A Modular Design Strategy with Consideration of Sustainability and Supplier Selection, Japanese-German Symposium on IoT design, systems and applications 2018 (JGIoT-DSA2018), Duisburg, GERMANY (2018.11.15).
Masato Inoue, Shogo Miyajima, Shuho Yamada and Tetsuo Yamada, A Modular Design MethodConsidering Supply Chain, 4th Symposium on Computational Reliability Engineering (CRE) in Product Development and Manufacturing, Gdynia, POLAND (2018.9.6).
Shuho Yamada and Masato Inoue, Product Architecture Decision for Multi-Generational Product (Modularization for Component Upgrading), 4th Symposium on Computational Reliability Engineering (CRE) in Product Development and Manufacturing, Gdynia, POLAND (2018.9.6).
Masato Inoue and Shuho Yamada, Uncertainty Design and Reliability Based on a Robust Design Method, 3rd Symposium on Computational Reliability Engineering (CRE) in Product Development and Manufacturing, London, UK (2017.10.19).
Shuho Yamada and Masato Inoue, Adaptability Evaluation Method for Multi-Generational Product's Component-Lifecycle Options at the Uncertain Early Design Phase, 3rd Symposium on Computational Reliability Engineering (CRE) in Product Development and Manufacturing, London, UK (2017.10.19).
Chise Shibata, Shuho Yamada, Tetsuo Yamada, Stefan Bracke, and Masato Inoue, Adaptability Evaluation for Life Cycle Design of Components, The 2nd Mechanical Engineering Workshop between UTM and Meiji University, Kuala Lumpur, MALAYSIA (2017.3.2).
Ryosuke Okada, Yoshiaki Murata, Yosuke Takeuchi, and Masato Inoue, Searching Method for Solution Principles at the Conceptual Design Phase Based on Set-Based Design, The 2nd Mechanical Engineering Workshop between UTM and Meiji University, Kuala Lumpur, MALAYSIA (2017.3.2).
Shota Yamazaki, Wataru Suzuki, Shuho Yamada, and Masato Inoue, A Universal Design method for Diversity of User Requirements, The 2nd Mechanical Engineering Workshop between UTM and Meiji University, Kuala Lumpur, MALAYSIA (2017.3.2).
Yuka Mizukura, Kosuke Kidokoro, Shuho Yamada, Zenichi Miyagi, and Masato Inoue, Proposal of a Robust Design Method for T-peel Test Apparatus Based on Set-based Design, The 2nd Mechanical Engineering Workshop between UTM and Meiji University, Kuala Lumpur, MALAYSIA (2017.3.2).
Shuho Yamada, and Masato Inoue, Consideration of Reliability Issues within the Product Life Cycle Design, 2nd Symposium on Computational Reliability Engineering (CRE) in Product Development and Manufacturing, Dresden, GERMANY (2015.10.27).
Masato Inoue, Consideration of Reliability Issues within the Product Development Phase, 1st Computational Reliability Engineering (CRE) in Symposium on Product Development and Manufacturing, Düsseldorf, GERMANY (2015.10.22).
Masato Inoue, Japan / Fukushima: Das Tohoku Erdbeben und der Tsunami -Konsequenzen für Bevölkerungs- und Objektschutz (Japan / Fukushima: The Tohoku Earthquake and the Tsunami - Consequences regarding the protection of population and objects), University of Wuppertal, Germany (2013.12.4).
Masato Inoue, Design methodology for the early phase of design - Japanese product development of automotive industries -, University of Wuppertal, Germany (2013.12.4).
Masato Inoue, Design methodology for the early phase of design, -Japanese product development-, University of Wuppertal, GERMANY (2011.11.9).
Masato Inoue, Product Design Method for the Early Phase of Design, Department of Naval Architecture and Ocean Engineering, Seoul National University, KOREA(2010).
Masato Inoue and Haruo Ishikawa, Set-Based Design Method Reflecting the Different Designers' Intentions, 19th CIRP Design Conference, Cranfield University, UK, (2009).

International Non-Peer-Reviewed Conference Papers (English)

Yoshiaki Murata, Masaki Takahashi, Shunsuke Iijima, Yosuke Takeuchi, and Masato Inoue, Design Method for Obtaining Diverse Design Solution Sets from Dynamic Simulations: Case Study of a Control Design for Isolation System, 10th International Symposium on Mechanics, Aerospace and Informatics Engineering (ISMAI-10), Gyeongnam, KOREA (2015.9.17-20).
Masato Shimada, Wataru Suzuki, Shuho Yamada, Yosuke Takeuchi, Wannes van den Bossche, and Masato Inoue, Proposal of a Universal Design Method for Reflecting Physical Characteristics of Diverse Users -Case study of a bicycle frame-, 10th International Symposium on Mechanics, Aerospace and Informatics Engineering (ISMAI-10), Gyeongnam, KOREA (2015.9.17-20).
Takuya Ninomiya, Masaki Takahashi, Masato Inoue, A Design Method for Unexpected Circumstances, 7th International Symposium on Mechanics, Aerospace and Informatics Engineering (ISMAI07), Hakone, JAPAN (2013.2.21).

▲
PAGE
TOP