ACHIEVEMENT | 明治大学　設計システム研究室

著書
原著論文
単行本掲載論文
国際会議論文（査読有）
招待講演
解説/国際会議論文（査読無）
国内学会

著書

Yusuke Kishita, Mitsutaka Matsumoto, Masato Inoue and Shinichi Fukushige, EcoDesign and Sustainability I: Products, Services, and Business Models (Sustainable Production, Life Cycle Engineering and Management), Springer, (2020.11).ISBN: 978-9811567780
Yusuke Kishita, Mitsutaka Matsumoto, Masato Inoue and Shinichi Fukushige, EcoDesign and Sustainability II: Social Perspectives and Sustainability Assessment (Sustainable Production, Life Cycle Engineering and Management), Springer, (2020.11).ISBN: 978-9811567742
小泉忠由，田辺実，大関浩，飛田春雄，大八木亮太郎，井上全人，舘野寿丈，山田周歩，イントロ製図学（改訂第4版），オフィスHANS，(2020.04.24). ISBN 978-4-901794-25-1
Kazuo Hiekata, Brian Moser, Masato Inoue, Josip Stjepandić and Nel Wognum，Transdisciplinary Engineering for Complex Socio-technical Systems, IOS Press, (2019.7). ISBN 978-1-64368-021-7
小泉忠由，田辺実，大関浩，飛田春雄，大八木亮太郎，井上全人，舘野寿丈，山田周歩，イントロ製図学（増補改訂第3版），オフィスHANS，(2016.10.21). ISBN 978-4-901794-23-7
小泉忠由，田辺実，大関浩，飛田春雄，大八木亮太郎，井上全人，イントロ製図学（増補改訂第2版），オフィスHANS，(2014.4.14). ISBN 978-4-901794-23-7
石川晴雄，中山良一，井上全人，現代設計工学，コロナ社，(2012.4.20). ISBN 978-4-339-04625-0

原著論文（査読付）

齊藤美詞，川南剛，井上全人，有彩色照明による視覚環境が温熱的快適性と作業能率に及ぼす影響，設計工学，Vol. 58, No. 11, pp. 439-510, (2023.11).
加藤勇吹，中島孝行，山田周歩，山田哲男，井上全人，階層クラスター分析を用いた作業者の身体特性を考慮した設備のデザインアプローチの提案，日本設備管理学会誌, Vol. 33, No. 3, pp. 96-104，(2021.10).
Jaeho Han, Hiromasa Ijuin, Tetsuo Yamada, Shuho Yamada and Masato Inoue, Sustainability Assessment of Reuse and Recycling Management Options for End-of-life Computers- Korean and Japanese Case Study Analysis, Recycling, Vol. 6, No. 55, pp. 1-17, (2021.08).
Tetsuo Yamada, Yusuke Suzuki, Yuki Kinoshita, Tadayuki Masui, Norihiko Itsubo and Masato Inoue, Disassembly System Design and Analysis with Environmental and Economic Parts Selection Using Life Cycle Inventory Database by Input-Output Tables, International Journal of Sustainable Manufacturing, Inderscience Publishers, Vol. 5, No. 1, pp. 23-43, (2021.07).
Masato Inoue, Wataru Suzuki, Shuho Yamada and Kazuhiro Aoyama, A Universal Design Method that Considers Variability in User Requirements: a Case Study of Mechanical Pencil Design, Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol. 15, No. 2, DOI:10.1299/jamdsm.2021jamdsm0022, (2021.03).
井上全人，水庫優果，山田周歩，宮城善一，設計意図を考慮した評価指標に基づくロバスト設計手法の提案，設計工学，Vol. 55, No. 12, pp. 751-764, (2020.12).
Shuho Yamada, Shogo Miyajima, Tetsuo Yamada, Stefan Bracke and Masato Inoue, Decision Support Method for Upgrade Cycle Planning and Product Architecture Design of an Upgradable Product, International Journal of Automation Technology, Vol. 14, No. 6, pp. 919-929, (2020.11).
Kazuki Yoda, Hayate Irie, Yuki Kinoshita, Tetsuo Yamada, Shuho Yamada and Masato Inoue, Remanufacturing Option Selection with Disassembly for Recovery Rate and Profit, International Journal of Automation Technology, Vol. 14, No. 6, pp. 930-942, (2020.11).
小林峻，藤田光伸，森孝男，杉本淳二，早川明宏，山田周歩，井上全人，自動車補修オプションの製品価値・環境負荷・コストの観点による適合性評価（自動車エンジンへの適用），日本機械学会論文集，Vol. 86, No. 891, DOI:10.1299/transjsme.20-00163, (2020.11).
Tomoaki Yatsuka, Aya Ishigaki, Surendra Gupta, Yuki Kinoshita, Tetsuo Yamada, and Masato Inoue, Collaboration Strategy for a Decentralized Supply Chain Using Linear Physical Programming, International Journal of Automation Technology, Vol. 14, No. 5, pp. 723-733, (2020.09).
山田周歩，御屋敷光平，山田哲男，井上全人，アップグレード製品サービスシステム設計のための更新計画構成手法の提案（環境，経済，顧客不満度の時間変化を考慮した計画構成手法），設計工学，Vol. 55, No. 8, pp. 497-510, (2020.08).【（公社）日本設計工学会令和3年度奨励賞】
Yuki Kinoshita, Tetsuo Yamada, Surendra M. Gupta, Aya Ishigaki and Masato Inoue, Decision Support Model of Environmentally Friendly and Economical Material Strategy for Life Cycle Cost and Recyclable Weight, International Journal of Production Economics, Vol. 224, doi: 10.1016/j.ijpe.2019.107545, (2020.06).
梅田浩平，近藤礼奈，木下雄貴，山田哲男，山田周歩，井上全人，材料提案機能を持つ温室効果ガスと調達コストの意思決定支援ツール開発，設計工学，Vol. 55, No. 4, pp. 277-292, (2020.04).
Masato Inoue, Shuho Yamada, Shogo Miyajima, Katsuhide Ishii, Rina Hasebe, Kazuhiro Aoyama, Tetsuo Yamada and Stefan Bracke, A Modular Design Strategy Considering Sustainability and Supplier Selection, Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol. 14, No. 2, doi:10.1299/jamdsm.2020jamdsm0023, (2020.03).
Hiromasa Ijuin, Yuki Kinoshita, Tetsuo Yamada, Aya Ishigaki and Masato Inoue, Designing Reverse Supply Chain Network with Costs and Recycling Rate by Using Linear Physical Programming, International Journal of Smart Computing and Artificial Intelligence, Vol. 3, No. 2, pp. 57-76, (2019.11).
山田周歩，金田郁可，山田哲男，井上全人，アップグレード製品・サービスシステム設計のためのライフサイクルオプション適合性評価手法の提案，設計工学，Vol. 54，No. 9, pp. 595-610, doi: 10.14953/jjsde.2018.2840, (2019.09).
Masato Inoue and Wataru Suzuki, Universal Design Considering Physical Characteristics of Diverse Users, International Journal of Automation Technology, Vol. 13, No. 4, pp. 517-525, (2019.07).
Kengo Nakamura, Hiromasa Ijuin, Tetsuo Yamada, Aya Ishigaki and Masato Inoue, Design and Analysis of Global Supply Chain Network with Trans-Pacific Partnership under Fluctuating Material Prices, International Journal of Smart Computing and Artificial Intelligence, Vol. 3, No. 1, pp. 17-34, (2019.05).
石井美帆, 中村謙吾, 山田哲男，井上全人，回収率とリサイクル率を考慮した循環型サプライチェーンネットワークの設計，日本設備管理学会誌, Vol. 31, No. 1, pp. 1-13，(2019.04).
近藤礼奈, 木下雄貴，山田哲男，伊坪徳宏，井上全人，GHG 排出量とコストを持つグローバル調達における発注量決定法，日本設備管理学会誌, Vol. 30, No. 4, pp. 101-110，(2019.02).
Shota Hasegawa, Yuki Kinoshita, Tetsuo Yamada, Masato Inoue, and Stefan Bracke，Disassembly Reuse Part Selection for Recovery Rate and Cost with Lifetime Analysis, International Journal of Automation Technology, Vol. 12, No. 6, pp. 822-832, (2018.11).
中村謙吾，伊集院大将，山田哲男，石垣綾，井上全人，環太平洋経済連携協定を持つグローバルサプライチェーンネットワークのモデル化，日本設備管理学会誌, Vol. 30, No. 3, pp. 69-81，(2018.10).
Yuki Kinoshita, Tetsuo Yamada, Surendra M. Gupta, Aya Ishigaki and Masato Inoue，Analysis of Cost Effectiveness by Material Type for CO₂ Saving and Recycling Rates in Disassembly Parts Selection using Goal Programming, Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol. 12, No. 3, pp. 1-18, doi: 10.1299/jamdsm.2018jamdsm008, (2018.7).
Tomoyuki Urata, Tetsuo Yamada, Norihiro Itsubo, and Masato Inoue, Global Supply Chain Network Design and Asian Analysis with Material-Based Carbon Emissions and Tax, Computers & Industrial Engineering, Vol. 113, pp. 779-792, (2017.11).
柴田知世，山田周歩，山田哲男，井上全人，製品のアップグレード設計への適合性評価（ノートパソコンの設計問題への適用），日本機械学会論文集，Vol. 83, No. 851, DOI:10.1299/transjsme.17-00082, (2017.07).
伊集院大将，山田哲男，石垣綾，井上全人，リバース・サプライチェーンネットワークの設計と素材再生分析，日本設備管理学会誌, Vol. 28, No. 4, pp. 11-23, (2017.02).
Shuho Yamada, Tetsuo Yamada, Stefan Bracke and Masato Inoue, Upgradable Design for Sustainable Manufacturer Performance and Profitability and Reduction of Environmental Load, International Journal of Automation Technology, Vol. 10，No. 5, pp. 690-698, doi:10.20965/ijat.2016.p0690, (2016.09).
Tomoyuki Urata, Tetsuo Yamada, Norihiro Itsubo, and Masato Inoue, Global Supply Chain Network Design for Lower Material-Based CO₂ Emissions and Costs between Developed and Emerging Countries, Journal of Japan Industrial Management Association, Vol. 67, No. 2E, pp. 156-166, (2016.09).
Yuki Kinoshita, Tetsuo Yamada, Surendra M. Gupta, Aya Ishigaki and Masato Inoue，Disassembly Parts Selection and Analysis for Recycling Rate and Cost by Global Programming，Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol. 10, No. 3, pp. 1-15, (2016.07).
木下雄貴，山田哲男，浦田智幸，山田周歩，井上全人，製品の違いを通じた組立・分解システムの比較考察によるボトルネック作業の特定とその改善方法，日本設備管理学会誌, Vol. 27, No. 4, pp. 131-144，(2016.02).
Kento Igarashi, Tetsuo Yamada, Surendra M. Gupta, Masato Inoue and Norihiro Itsubo，Disassembly System Modeling and Design with Parts Selection for Cost, Recycling and CO₂ Saving Rates Using Multi Criteria Optimization，Journal of Manufacturing Systems, Elsevier, Vol. 38, No. 41, pp. 151-164, (2016.01).
Yuta Yoshizaki, Tetsuo Yamada, Norihiro Itsubo and Masato Inoue，Material Based Low-Carbon and Economic Supplier Selection with Estimation of GHG Emissions and Affordable Cost Increment for Parts Production among Multiple Asian Countries，Journal of Japan Industrial Management Association, Vol. 66, No. 4E, pp. 435-442, (2016.01).
浦田智幸，山田哲男，五十嵐健人，井上全人，木下雄貴，製品・生産設計間における組立および分解の作業とシステムの比較分析に関する事例研究，日本設備管理学会誌, Vol. 27, No. 3, pp. 82-91, (2015.10).
Yuta Yoshizaki, Tetsuo Yamada, Norihiro Itsubo and Masato Inoue, Material Based Low-Carbon and Economic Supplier Selection with Estimation of CO₂ Emissions and Cost Using Life Cycle Inventory Database, Innovation and Supply Chain Management，Vol. 8，No. 4，pp. 159-170, (2014.12).
井上全人，山田哲男，石川晴雄，初期設計段階から性能と環境負荷削減を両立する3D-CADに基づくライフサイクル設計支援システム，設計工学，Vol. 49，No. 10, pp. 543-549, (2014.10).
Kento Igarashi, Tetsuo Yamada and Masato Inoue, 2-Stage Optimal Design and Analysis for Disassembly System with Environmental and Economic Parts Selection using Recyclability Evaluation Method, Industrial Engineering & Management Systems，Vol. 13，No. 1, pp. 53-67, doi:10.7232/iems.2014.13.1.053, (2014.03).
石灰伸好，井上全人，山本渉，鈴木和幸，石川晴雄，車両開発の初期構想段階におけるトポロジーと形状の同時満足化設計，自動車技術会論文集，Vol. 45，No. 2, pp. 329-336, (2014.03).
山田哲男，奥寺勇人，伊坪徳宏，井上全人，部品構成と作業先行関係を考慮した素材仕分け分解システムの性能評価，日本設備管理学会誌，Vol. 25，No. 4, pp. 178-185, (2014.01).
Stefan Bracke, Jens Michalski, Masato Inoue and Tetsuo Yamada, CDMF-RELSUS Concept: Reliable Products are Sustainable Products - Influences on Product Design, Manufacturing and Use Phase, International Journal of Sustainable Manufacturing, Inderscience Publishers, Vol. 3, No. 1, pp. 57-73, doi:10.1504/IJSM.2013.058634, (2014.01).
Masato Inoue, Yoon-Eui Nahm, Kenji Tanaka and Haruo Ishikawa, Collaborative Engineering among Designers with Different Preferences: Application of the Preference Set-Based Design to the Design Problem of an Automotive Front-Side Frame, Concurrent Engineering: Research and Applications, SAGE Publications, Vol. 21, No. 4, pp. 252-267, doi: 10.1177/1063293X13493447, (2013.12).
Masato Inoue, Yoon-Eui Nahm and Haruo Ishikawa, Application of Preference Set-Based Design Method to Multilayer Porous Materials for Sound Absorbency and Insulation, International Journal of Computer Integrated Manufacturing, Taylor & Francis, Vol. 26, Issue 12, pp. 1151-1160, doi: 10.1080/0951192X.2011.60236, (2013.12).
Kento Igarashi, Tetsuo Yamada and Masato Inoue, Disassembly System Design with Environmental and Economic Parts Selection using Recyclability Evaluation Method, Journal of Japan Industrial Management Association, Vol. 64, No. 2E, pp. 293-302, (2013.7).
Yoon-Eui Nahm, Haruo Ishikawa and Masato Inoue, New Rating Methods for Prioritizing Customer Requirements in QFD with Incomplete Customer Preferences, International Journal of Advanced Manufacturing Technology, Springer-Verlag London, Vol. 65, Issue 9-12, pp. 1587-1604, doi:10.1007/s00170-012-4282-1, (2013.04).
Masato Inoue, Kai Lindow, Rainer Stark, Kenji Tanaka, Yoon-Eui Nahm and Haruo Ishikawa, Decision-Making Support for Sustainable Product Creation, Advanced Engineering Informatics, Elsevier, Vol. 26, Issue 4, pp. 782-792, doi: 10.1016/j.aei.2012.07.002, (2012.10).

単行本掲載論文（査読付）

Rena Kondo, Yuki Kinoshita, Tetsuo Yamada, Norihiro Itsubo and Masato Inoue,
Effects of Carbon Tax on Low-Carbon and Economic Supplier Selection for Asian Assembly Product, Technologies and Eco-innovation towards Sustainability II Eco Design Assessment and Management, Chapter 24, 377p., Springer, Edited by Allen H. Hu, Mitsutaka Matsumoto, Tsai Chi Kuo, Shana Smith, pp. 301-313, doi:10.1007/978-981-13-1196-3_24, (2019.01).
Shuho Yamada, Takumi Sugiura, Tetsuo Yamada, Stefan Bracke and Masato Inoue,
A Strategy of Providing Upgradable Product Service System for Economic and Environmental Balance, Advanced in Transdisciplinary Engineering: Transdisciplinary Engineering Methods for Social Innovation of Industry 4.0, Vol. 7, IOS Press, Edited by Margherita Peruzzini, Marcello Pellicciari, Cees Bil, Josip Stjepandić, Nel Wognum, pp. 1155-1164, doi:10.3233/978-1-61499-898-3-1155, (2018.08).
Takuya Okamoto, Mitsunobu Fujita, Takao Mori, Motohiro Tamaki, Akihiro Hayakawa and Masato Inoue,
Proposal of an Appropriate Repair Option from the View Point of Product Value, Environment Impact and Cost: Case Study of Automobile Engine, Advanced in Transdisciplinary Engineering: Transdisciplinary Engineering Methods for Social Innovation of Industry 4.0, Vol. 7, IOS Press, Edited by Margherita Peruzzini, Marcello Pellicciari, Cees Bil, Josip Stjepandić, Nel Wognum, pp. 927-935, doi:10.3233/978-1-61499-898-3-927, (2018.08).
Tetsuo Yamada, Shota Hasegawa, Yuki Kinoshita, Shuho Yamada, Masato Inoue, Christoph Rosebrock, Stefan Bracke,
Process Integration Concept for Waste Reduction among Manufacturing Planning, Modularization and Validation,
Procedia Manufacturing, Elsevier, Edited by Günther Seliger, Rafael Wertheim, Holger Kohl, Moshe Shpitalni, Anath Fischer, Volume 21, pp. 337-344, doi:10.1016/j.promfg.2018.02.129, (2018).
Stefan Bracke, Shuho Yamada, Yuki Kinoshita, Masato Inoue, Tetsuo Yamada,
Decision Making within the Conceptual Design Phase of Eco-Friendly Products,
Procedia Manufacturing, Elsevier, Edited by Günther Seliger, Volume 8, pp. 463-470, doi: 10.1016/j.promfg.2017.02.059, (2017).
Stefan Bracke, Marcin Hinz, Masato Inoue, Edoardo Patelli, Simon Kutz, Hanno Gottschalk, Berna Ulutas, Christoph Hartl, Peter Mörs, and Pasacal Bonnaud, Reliability Engineering in face of Shorten Product Life Cycles: Challenges, Technique Trends and Method Approaches to Ensure Product Reliability,
Risk, Reliability and Safety: Innovating Theory and Practice, Taylor & Francis, Edited by Lesley Walls, Matthew Revie, and Tim Bedford, pp. 2884-2891, (2017.02). ISBN: 978-1-138-02997-2
Masato Inoue, Shuho Yamada, Tetsuo Yamada, Stefan Bracke,
Product Upgradability for Satisfying Future Performance, Low Price and Environmental Loads, and Manufacturer Profitability throughout the Product Lifecycle,
Procedia CIRP, Elsevier, Edited by Günther Seliger, Volume 48, pp. 40-44, doi: 10.1016/j.procir.2016.03.015, (2016).
Stefan Bracke, Masato Inoue, Berna Ulutas,
Contribution for Analysing, Saving and Prioritising of Lessons Learned Issues Regarding Product Improvement and Future Product Generation,
Procedia CIRP, Elsevier, Edited by Günther Seliger, Holger Kohl and Jürgen Mallon, Volume 40, pp. 179-184, doi: 10.1016/j.procir.2016.01.095, (2016).
Yuki Kinoshita, Tetsuo Yamada, Surendra M. Gupta, Aya Ishigaki and Masato Inoue, Analysis of Environmental and Economic Disassembly Parts Selection by Goal Programming,
Procedia CIRP, Elsevier, Edited by Günther Seliger, Holger Kohl and Jürgen Mallon, Volume 40, pp. 162-167, doi:10.1016/j.procir.2016.01.092, (2016).
Shuho Yamada, Tetsuo Yamada, Stefan Bracke and Masato Inoue,
Upgradable Design for Reduction of Production Cost and CO₂ Emission - Case Study of a Laptop Computer, Applied Mechanics and Materials, Vol. 761, pp. 589-593, doi:10.4028/www.scientific.net/AMM.761.589, (2015.05).
Tomoyuki Urata, Tetsuo Yamada, Norihiro Itsubo and Masato Inoue,
Modeling and Balancing for Costs and CO₂ Emissions in Global Supply Chain Network among Asian Countries,
Procedia CIRP, Elsevier, Edited by Günther Seliger and Noordin Mohd. Yusof, Volume 26, pp. 664-669, doi: 10.1016/j.procir.2014.07.107, (2015.03).
Tetsu Kawasaki, Tetsuo Yamada, Norihiro Itsubo and Masato Inoue,
Multi Criteria Simulation Model for Lead Times, Costs and CO₂ Emissions in Low-Carbon Supply Chain Network,
Procedia CIRP, Elsevier, Edited by Gunther Seliger and Noordin Mohd. Yusof, Volume 26, pp. 329-334, doi: 10.1016/j.procir.2014.07.182, (2015.03).
Masato Inoue, Shuho Yamada, Tetsuo Yamada and Stefan Bracke,
A Design Method for Product Upgradability with Different Customer Demands,
Product Lifecycle Management for Global Market, Series: IFIP Advances in Information and Communication Technology, Vol. 442, Springer, Edited by Shuichi Fukuda, Alain Bernard, Balan Gurumoorthy, and Abdelaziz Bouras, pp. 91-100, (2015).
Stefan Bracke, Masato Inoue, Berna Ulutas and Tetsuo Yamada,
CDMF-RELSUS concept: Reliable and Sustainable products - Influences on design, manufacturing, layout integration and use phase,
Procedia CIRP, Elsevier, Edited by Terje K. Lien, Volume 15, pp. 8-13, doi: 10.1016/j.procir.2014.06.083, (2014). ISSN 2212-8271
Masato Inoue, Yoon-Eui Nahm, Kenji Tanaka and Haruo Ishikawa,
Decision-Making Support for Selection of Design Ideas at the Early Phase of Structural Design,
Concurrent Engineering Approaches for Sustainable Product Development in a Multi-Disciplinary Environment,
Springer London, Edited by Josip Stjepandic, Georg Rock, Cees Bil, Volume 1, pp. 521-532, doi: 10.1007/978-1-4471-4426-7_45, (2013). ISBN 978-1-4471-4425-0
Kai Lindow, Robert Woll, Masato Inoue, Haruo Ishikawa and Rainer Stark,
Approaches for Sustainability Assessment in the Conceptual Design Phase,
Sustainable Product Development,
Springer-Verlag London, Edited by Amaresh Chakrabarti, Chapter 36, pp. 377-387, doi: 10.1007/978-1-4471-4507-3_36, (2012.11). ISBN 978-1-4471-4506-6

国際会議論文（査読付）

Kenichiro Kamimura, Yuki Komatsu, Kentaro Fujiwara, Shuho Yamada and Masato Inoue, Design Support System for Product Architecture Considering Multi-Generational Use, Proceedings of EcoDesign (EcoDesign 2023), Nara Prefectural Convention Center, (2023.11.29-12.3)
Suki Ueda, Reo Sato, Mitsunobu Fujita, Takao Mori, Shuho Yamada, Akihiro Hayakawa and Masato Inoue, Repair Options in Terms of Product Value, Environmental Impact, and Cost for Automobile User, Proceedings of EcoDesign (EcoDesign 2023), Nara Prefectural Convention Center, (2023.11.29-12.3)
Yo Otsuka, Mamiko Sakuragi and Masato Inoue, A User-Centered Design Method Based on Evaluation Grid Method and Rough Sets, Proceedings of International Conference on Design and Concurrent Engineering 2023 & Manufacturing Systems Conference 2023 (JSME iDECON/MS2023) , Keio University, (2023.9.2)
Jaeho Han, Hiromasa Ijuin, Tetsuo Yamada, Shuho Yamada and Masato Inoue, Environmental and Economical Design Problem of Upgrading and Remanufacturing Option Selection, Proceedings of EcoDesign (EcoDesign 2021), online oral presentation, (2021.12.1-3)
Stefan Bracke, Alicia Puls and Masato Inoue, COVID-19 pandemic: Analyzing of Restrictions, Medical Care and Prevention Measures in Germany and Japan, European Safety and Reliability (ESREL 2021), Angers, FRANCE, (2021.9.19-23)
Kentaro Fujiwara, Shogo Miyajima, Rina Hasebe, Shuho Yamada, Tetsuo Yamada, and Masato Inoue, Upgrade Planning and Architectural Design Methods for Multi-Generational Use, 10th International Conference on Design and Concurrent Engineering (iDECON 2021), Chiba, JAPAN (online oral presentation), (2021.9.4)
Mamiko Sakuragi, Rimpei Yamaguchi, Tomoya Ishikawa, and Masato Inoue, User-Oriented Kansei Design Method Based on Evaluation Grid Method, 10th International Conference on Design and Concurrent Engineering (iDECON 2021), Chiba, JAPAN (online oral presentation), (2021.9.3)
Jaeho Han, Hiromasa Ijuin, Tetsuo Yamada, Shuho Yamada, and Masato Inoue, Problem of Remanufacturing Option Selection with Disassembly for CO₂ Saving Rate and Cost, Northeast Decision Sciences Institute 2021 Annual Conference (NEDSI 2021), Virtual Conference (2021.3.26-27)
Tomoya Ishikawa, Rimpei Yamaguchi, Shuho Yamada, and Masato Inoue, Design Method for Deriving Suitable Design Solution Reflected Sensitivity Information: Case Study of Sound Signal at Traffic Lights, 9th International Conference on Design and Concurrent Engineering (iDECON 2020), Kota Kinabalu, MALAYSIA (online oral presentation), (2020.9.21-22)
Rina Hasebe, Shuho Yamada, Tetsuo Yamada, and Masato Inoue, Development of Product Architecture and an Associated Supply Chain Decision Support System Considering Quality, Procurement Cost, Transportation Lead Time, and Environmental Load, 9th International Conference on Design and Concurrent Engineering (iDECON 2020), Kota Kinabalu, MALAYSIA (online oral presentation), (2020.9.21-22)
Yota Kondo, Tatsuya Karube, Yuta Onoda, Zenichi Miyagi, Shuho Yamada, and Masato Inoue, Uncertain Design Based on Robust Design Method (Application to Design of T-Peel Test Apparatus), 9th International Conference on Design and Concurrent Engineering (iDECON 2020), Kota Kinabalu, MALAYSIA (online oral presentation), (2020.9.21-22)
Ibuki Kato, Takayuki Nakajima, Shuho Yamada, and Masato Inoue, Universal Design Method Considering Physical Characteristics and Physical Load Based on Digital Human Model: Case Study of Height-Adjustable Standing Table, 9th International Conference on Design and Concurrent Engineering (iDECON 2020), Kota Kinabalu, MALAYSIA (online oral presentation), (2020.9.21-22)
Tomoaki Yatsuka, Aya Ishigaki, Yuki Kinoshita, Tetsuo Yamada, and Masato Inoue, Single-Vender Multi-Buyer Supply Chain Collaboration Method Using Multi-Player Linear Physical Programming, The 20th Asia Pacific Industrial Engineering and Management Systems (APIEMS2019), Kanazawa (2019.12.2-5)
Yamada Shuho, Miyajima Shogo, Hasebe Rina, Yamada Tetsuo, Bracke Stefan and Masato Inoue, Decision Support Method for Planning Upgrade Cycle and Designing Product Architecture of Upgradable Product Service System, Proceedings of EcoDesign (EcoDesign 2019), Yokohama, (2019.11.25-27)
Shun Kobayashi, Mitsunobu Fujita, Takao Mori, Junji Sugimoto, Akihiro Hayakawa and Masato Inoue, Adequacy Assessment of Automobile Repair Option for Product Value, Environmental Impact and Cost: Case Study of Automobiles Starter Motor, Proceedings of EcoDesign (EcoDesign 2019), Yokohama, (2019.11.25-27)
Tatsuya Karube, Yuka Mizukura, Nobuki Sato, Yuta Onoda, Zenichi Miyagi, and Masato Inoue, A Robust Design Method Based on Evaluation Index in Consideration of Designer's Intention, International Conference on Design and Concurrent Engineering (iDECON 2019), Sendai (2019.9.23-24)【（一社）品質工学会 2020年品質工学会学生賞】
Rimpei Yamaguchi, Masaki Kawaguchi, Shota Yamazaki, Shuho Yamada, and Masato Inoue, A Design Method for Deriving Non-Existent Design Solution with Diverse User Requirements: Case Study of Mechanical Pencils, International Conference on Design and Concurrent Engineering (iDECON 2019), Sendai (2019.9.23-24)
Tomoaki Yatsuka, Aya Ishigaki, Yuki Kinoshita, Tetsuo Yamada, and Masato Inoue, Effect of Robust Optimization Approach on Multi-Player Multi-Objective Production Planning Problem Using Linear Physical Programming, 16th International Logistics and Supply Chain Congress, pp. 137-143, Denizli, TURKEY (2018.10.18-20)
Shogo Miyajima, Shuho Yamada, Tetsuo Yamada, and Masato Inoue, Proposal of a Modular Design Method Considering Supply Chain (Comprehensive Evaluation by Environment Load, Cost, Quality, and Lead Time), International Conference on Design and Concurrent Engineering (iDECON 2018), Kuching, MALAYSIA (2018.9.17-18)【Best Paper Award】
Takayuki Nakajima, Masato Shimada, and Masato Inoue, A Universal Design Method that Considers Physical Burden through the Application of a Digital Human Model: Case Study of a Working Table, International Conference on Design and Concurrent Engineering (iDECON 2018), Kuching, MALAYSIA (2018.9.17-18)
Stefan Bracke and Masato Inoue, Reliability and Safety Engineering: The Principles Innovation and Optimisation of German and Japanese Product Constructions, European Safety and Reliability (ESREL 2018), Trondheim, NORWAY , (2018.6.17-21)
Stefan Bracke, Marcin Hinz, C. van Gulijk, F. Gronwald, M. Muenker, Masato Inoue, Shuho Yamada, E. Patelli, Berna Ulutas, M. Bonato, and Tetsuo Yamada, Reliability Engineering Based on Operating Data and Monitoring Systems within Technical Products: Challenges, Requirements and Approaches, European Safety and Reliability (ESREL 2018), Trondheim, NORWAY, (2018.6.17-21)
Tomoaki Yatsuka, Aya Ishigaki, Hiromasa Ijuin, Yuki Kinoshita, Tetsuo Yamada, and Masato Inoue, Mathematical Modeling of Multi-player Multi-objective Decision Making by Linear Physical Programming, IIAI International Congress on Advanced Applied Informatics (IIAI AAI 2018), Yonago (2018.7.8-13)【Outstanding Paper Award】
Kento Igarashi, Tetsuo Yamada, Norihiro Itsubo, and Masato Inoue, Comparison between Different Products by Disassembly System Design with Parts Selection for Cost, Recycling and CO₂ Saving Rates using Multi-Criteria Optimization, 3rd International Conference on Business Management of Technology (BMOT2018), Yonago (2018.7.8-12)
Takuya Okamoto, Mitsunobu Fujita, Takao Mori, Motohiro, Tamaki, Akihiro Hayakawa and Masato Inoue, Proposal of an Appropriate Repair Option from the View Point of Product Value, Environment Impact and Cost: Case Study of Automobile Engine, Proceedings of 25th International Conference on Transdisciplinary Engineering (TE2018), Modena, ITALY, (2018.7.3-6)
Shuho Yamada, Takumi Sugiura, Tetsuo Yamada, Stefan Bracke and Masato Inoue, A Strategy of Providing Upgradable Product Service System for Economic and Environmental Balance, Proceedings of 25th International Conference on Transdisciplinary Engineering (TE2018), Modena, ITALY, (2018.7.3-6)
Yuki Kinoshita, Tetsuo Yamada, Surendra M. Gupta, Aya Ishigaki, and Masato Inoue, Linear Physical Programming Approach for Environmentally Friendly and Economical Material Selection, Institute of Industrial and Systems Engineers (IISE) Annual Conference and Expo 2018, pp. 965-970, Orland, USA (2018.5.19-22)
Tomoaki Yatsuka, Riku Yamagata, Aya Ishigaki, Hiromasa Ijuin, Yuki Kinoshita, Tetsuo Yamada, and Masato Inoue, Design of Multi-Player Multi-Objective Decision Making Support System Using a Linear Physical Programming Approach, Northeast Decision Sciences Institute 2018 Annual Conference (NEDSI 2018), USA (2018.4.12-14)【Best Poster Award, 3rd】
Yuki Kinoshita, Tetsuo Yamada, Surendra M. Gupta, Aya Ishigaki, and Masato Inoue, Material Selection for Cost, Disposal Weight and GHG Emissions by Linear PhysicalL Programming, Northeast Decision Sciences Institute 2018 Annual Conference (NEDSI 2018), USA (2018.4.12-14)
Rena Kondo, Yuki Kinoshita, Tetsuo Yamada, and Masato Inoue, Effects of Different Carbon Tax among Asian Coutries on Low-Carbon and Economic Supplier Selection, Northeast Decision Sciences Institute 2018 Annual Conference (NEDSI 2018), USA (2018.4.12-14)
Tetsuo Yamada, Shota Hasegawa, Yuki Kinoshita, Shuho Yamada, Masato Inoue, Christoph Rosenbrock and Stefan Bracke, Process Integration Concept for Waste Reduction among Manufacturing Planning, Modularization and Validation, 15th Global Conference on Sustainable Manufacturing (GCSM 2017), Haifa, ISRAEL (2017.9.25-27)
Chise Shibata, Shuho Yamada, Tetsuo Yamada, Stefan Bracke, and Masato Inoue, Proposal of A Component Upgradability Indicator from Comprehensive Perspectives (Case Study of Laptop Modules), The 4th International Conference on Design Engineering and Science (ICDES2017), Aachen, GERMANY (2017.9.17-19).
Ryosuke Okada, Yoshiaki Murata, and Masato Inoue, A Method of Selecting a Principle Solution Variant at the Conceptual Design Phase Based on Set-Based Design, International Conference on Design and Concurrent Engineering 2017 (iDECON 2017), Osaka (2017.9.7).
Chise Shibata, Shuho Yamada, Tetsuo Yamada, Stefan Bracke, and Masato Inoue, Proposal of an Adaptability Evaluation Indicator for Component’s Life Cycle Options from Environmental, Economical, Functional and Reliable Perspectives, International Conference on Design and Concurrent Engineering 2017 (iDECON 2017), Osaka (2017.9.7).
Stefan Bracke, Bianca Backes, Edoardo Patelli, Masato Inoue, Shuho Yamada, Berna Ulutas, Christoph Hartl, Peter Dültgen, Marek Młyńczak, Gürsel Suel, Challenges, Trends and Approaches of Future Reliability Engineering in High Precision Manufacturing Processes, 24th International Conference on Production Research (ICPR 2017), Poznan, POLAND (2017.7.30-8.3)
Shota Hasegawa, Yuki Kinoshita, Tetsuo Yamada, Masato Inoue and Stefan Bracke, Disassembly Parts Selection for Recovery Rate and Cost Considering Reuse, 24th International Conference on Production Research (ICPR 2017), Poznan, POLAND (2017.7.30-8.3)
Kengo Nakamura, Hiromasa Ijuin, Tetsuo Yamada, Aya Ishigaki, and Masato Inoue, Effect of Material Prices for Global Supply Chain Network with Trans-Pacific Partnership, 6th International Congress on Advanced Applied Informatics (AAI 2017), Hamamatsu (2017.7.9-13)
Hiromasa Ijuin, Yuki Kinoshita, Tetsuo Yamada, Aya Ishigaki, and Masato Inoue, Liner Physical Programming Oriented Approach of Reverse Supply Chain Network Design for Costs and Recycling Rate, 6th International Congress on Advanced Applied Informatics (AAI 2017), Hamamatsu (2017.7.9-13)
Yuki Kinoshita, Tetsuo Yamada, Surendra M. Gupta, Aya Igarashi, and Masato Inoue, Environmentally Friendly and Economical Design Alternatives by Material Selection between Assembly and Disassembly Systems, Northeast Decision Sciences Institute 2017 Annual Conference, USA (2017.3.22-25)
Rena Kondo, Yuki Kinoshita, Tetsuo Yamada, Norihiro Itsubo, and Masato Inoue, Analysis of Material Based GHG Emissions and Costs for Assembly Products Using Asian Lifecycle Inventory Databases: Cell Phone Case Study, The 24th CIRP Conference on Life Cycle Engineering (CIRP LCE 2017), Kamakura, (2017.3.8-10)
Yoshiaki Murata, Masaki Takahashi, Yosuke Takeuchi and Masato Inoue, A Design Method Obtaining Diverse Design Solution Sets for the Boundary Condition Change: Application to an Isolation System, Asia Design Engineering Workshop 2016 (A-DEWS 2016), Osaka, JAPAN (2016.12.12-14)
Yuki Kinoshita, Tetsuo Yamada, Surendra M. Gupta, Aya Igarashi, and Masato Inoue, Environmental and Economic Disassembly Parts Selection Design for Recycling, CO₂ Saving Rates and Cost by Goal Programming, The 18th International Conference on Industrial Engineering (IJIE2016), Seoul, Korea (2016.10.10-12)
Masato Inoue, Sota Takahashi, Mitsunobu Fujita, Takao Mori, Motohiro Tamaki, Junji Sugimoto, Katsumi Ishizuka, Katsumi Oppata, Shigeyuki Suzuki, Kenroku Kobayashi, Hironori Tani and Akihiro Hayakawa, A Case Study in Quantitative Estimation of the CO₂-Emissions Reduction from 50 Major Reuse Parts for Japanese Automobile based on Data of Vehicle Inspection Certificate, The 12th Biennial International Conference on EcoBalance (EcoBalance 2016), Kyoto, JAPAN (2016.10.3-6)
Hiromasa Ijuin, Tetsuo Yamada, Aya Igarashi, and Masato Inoue, Reverse Supply Chain Flows with Material Recovery Constraint, The 12th Biennial International Conference on EcoBalance (EcoBalance 2016), Kyoto, JAPAN (2016.10.3-6)
Stefan Bracke, Shuho Yamada, Yuki Kinoshita, Masato Inoue and Tetsuo Yamada, Decision Process within the Conceptual Design Phase of Eco-Friendly Products, 14th Global Conference on Sustainable Manufacturing (GCSM 2016), Cape Town, SOUTH AFRICA (2016.10.2-9)
Stefan Bracke, Simon Kutz, Masato Inoue, Hanno Gottschalk, Marcin Hinz, Edoardo Patelli, Christoph Hartl, Berna Ulutas, Pasacal Bonnaud, and Peter Mörs, Reliability Engineering in face of Shorten Product Life Cycles: Challenges, Technique Trends and Method Approaches to Ensure Product Reliability, European Safety and Reliability (ESREL 2016), Glasgow, UK (2016.9.25-29)
Wataru Suzuki, Masato Shimada, Shuho Yamada and Masato Inoue, Set-Based Universal Design Method Considering with User Requirements Variability: Case Study of a Mechanical Pencil, International Conference on Design and Concurrent Engineering (iDECON 2016), Pulau Langkawi, MALAYSIA (2016.9.19-21)
Masato Shimada, Wataru Suzuki, Shuho Yamada and Masato Inoue, Proposal of a Universal Design Method for Reflecting Physical Characteristics of Diverse Users: Case Study of a Bicycle Frame, International Conference on Design and Concurrent Engineering (iDECON 2016), Pulau Langkawi, MALAYSIA (2016.9.19-21)
Masato Shimada, Wataru Suzuki, Shuho Yamada and Masato Inoue, A Universal Design Method for Reflecting Physical Characteristics Variability: Case Study of a Bicycle Frame, Universal Design 2016 (UD2016), York, UK (2016.8.21-24).
Masato Inoue, Shuho Yamada, Tetsuo Yamada and Stefan Bracke, Product Upgradability for Satisfying Future Performance, Low Price and Environmental Loads, and Manufacturer Profitability throughout the Product Lifecycle, 23rd CIRP Conference on Life Cycle Engineering (CIRP LCE 2016), Berlin, GERMANY (2016.5.22-24).
Yuki Kinoshita, Tetsuo Yamada, Surendra M. Gupta, Aya Igarashi, Norihiro Itsubo and Masato Inoue, Disassembly Parts Selection for Environmental Loads Cost by Goal Programming, Northeast Decision Sciences Institute 2016 Annual Conference, Alexandria, USA (2016.3.31-4.2)
Hiromasa Ijuin, Tetsuo Yamada, Aya Igarashi, and Masato Inoue, Modeling and Analysis of Reverse Supply Chain Network with End-of-Life Product Status for Costs and Recycling Rate, Northeast Decision Sciences Institute 2016 Annual Conference, Alexandria, USA (2016.3.31-4.2)
Shuho Yamada, Tetsuo Yamada, Stefan Bracke and Masato Inoue, Satisficing Design Method for Sustainable Performance, Profitability for Manufacturer and Reduction of Environmental Loads, Proceedings of EcoDesign 2015 International Symposium, Tokyo, JAPAN, pp. 392-396, (2015.12.2)
Yuki Kinoshita, Tetsuo Yamada, Surendra M. Gupta, Aya Ishigaki and Masato Inoue, Disassembly Parts Selection for Recycling Rate and Cost by Goal Programming, The 3rd International Workshop on Production and Logistics, Kusatsu, JAPAN (2015.10.31-11/1)
Stefan Bracke, Masato Inoue and Berna Ulutas, Contribution for Analysing, Saving and Prioritising of Lessons Learned Issues Regarding Product Improvement and Future Product Generations, 13th Global Conference on Sustainable Manufacturing (GCSM 2015), Ho Chi Minh City, VIETNAM (2015.9.16-17)
Yuki Kinoshita, Tetsuo Yamada, Surendra M. Gupta, Aya Ishigaki and Masato Inoue, Analysis of Environmental and Economic Disassembly Parts Selection by Goal Programming, 13th Global Conference on Sustainable Manufacturing (GCSM 2015), Ho Chi Minh City, VIETNAM (2015.9.16-17)
Yosuke Takeuchi, Masaki Takahashi, Shunsuke Iijima, Yoshiaki Murata and Masato Inoue, Set-Based Design for Obtaining Multi-Objective Satisfactory Solutions Based on Dynamic Simulations, International Conference on Design and Concurrent Engineering (iDECON 2015), Tokushima, JAPAN (2015.9.6-7)
Wataru Suzuki, Yosuke Takeuchi and Masato Inoue, Set-Based Universal Design for Obtaining Diverse Solution Sets Based on Physical Characteristics Variability: Case Study of a Train Strap, International Conference on Design and Concurrent Engineering (iDECON 2015), Tokushima, JAPAN (2015.9.6-7)
Sota Takahashi, Masato Iwasaki, Mitsunobu Fujita, Takao Mori, Motohiro Tamaki, Akihiko Sano, Shigeyuki Suzuki, Kenroku Kobayashi, Hironori Tani, Akihiro Hayakawa and Masato Inoue, Quantitative Estimation of the CO₂-Emissions Reduction from Reuse Automobile Parts, International Conference on Design and Concurrent Engineering (iDECON 2015), Tokushima, JAPAN (2015.9.6-7)
Tomoyuki Urata, Tetsuo Yamada, Norihiro Itsubo, and Masato Inoue, An Asian Global Supply Chain Network Design for Lower Material Based CO₂ Emissions and Costs, 23rd International Conference for Production Research (ICPR23), Manila, PHILIPPINES (2015.8.5).【Outstanding Paper Award】
Yuki Kinoshita, Tetsuo Yamada, Surendra M. Gupta, Aya Ishigaki and Masato Inoue, Disassembly System Design with Environmental and Economic Parts Selection Using Goal Programming, International Conference on Remanufacturing (ICoR2015), pp. 219-226, Amsterdam, NETHERLANDS (2015.6.15).
Yuki Kinoshita, Tetsuo Yamada, Surendra M. Gupta, and Masato Inoue, A Multi-Objective Problem for Product and System Design in Assembly and Disassembly, Northeast Decision Sciences Institute 2015 Annual Conference, Cambrige, USA (2015.3.20-22).
Shuho Yamada, Tetsuo Yamada, Katsuyuki Nakano, Stefan Bracke and Masato Inoue, An Environmental Conscious Product Design Method for Sustainability of the Product's Value, Going Green - CARE INNOVATION 2014, Vienna, AUSTRIA (2014.11.18)
Yuta Yoshizaki, Tetsuo Yamada, Norihiro Itsubo and Masato Inoue, Low-carbon and Economic Supplier Selection among Multiple Asian Countries with Estimation of GHG Emissions and Cost for Parts Production, The 1st East Asia Workshop on Industrial Engineering (EAWIE), Hiroshima, JAPAN (2014.11.8).
Shuho Yamada, Tetsuo Yamada, Stefan Bracke and Masato Inoue, Upgradable Design for Reduction of Production Cost and CO₂ Emission - Case Study of a Laptop Computer, 3rd International Conference on Design and Concurrent Engineering (iDECON 2014), Melaka, MALAYSIA (2014.9.22-23)
Tetsuo Yamada, Yuta Yoshizaki, Norihiro Itsubo and Masato Inoue, Low-Carbon and Economic Supplier Selection Using Life Cycle Inventory Database by Asian International Input-Output Tables, 12th Global Conference on Sustainable Manufacturing (GCSM 2014), Johor Bahru, MALAYSIA (2014.9.22-24)
Tomoyuki Urata, Tetsuo Yamada, Norihiro Itsubo and Masato Inoue, Modeling and Balancing for Costs and CO₂ Emissions in Global Supply Chain Network among Asian Countries, 12th Global Conference on Sustainable Manufacturing (GCSM 2014), Johor Bahru, MALAYSIA (2014.9.22-24)
Tetsu Kawasaki, Tetsuo Yamada, Norihiro Itsubo and Masato Inoue, Multi Criteria Simulation Model for Lead Times, Costs and CO₂ Emissions in Low-Carbon Supply Chain Network between Malaysia, China and Japan, 12th Global Conference on Sustainable Manufacturing (GCSM 2014), Johor Bahru, MALAYSIA (2014.9.22-24)
Shuho Yamada, Tetsuo Yamada, Stefan Bracke and Masato Inoue, An Upgrade Product Design Method for Satisfying Performance Criteria, Environment Load and Cost, The 3rd International Conference on Design Engineering and Science (ICDES2014), pp. 174-179, Pilsen, CZECH (2014.8.31-9.3)
Masato Iwasaki, Mitsunobu Fujita, Takao Mori, Akihiko Sasaki, Motohiro Tamaki, Akihiko Sano, Hironori Tani, Akihiro Hayakawa and Masato Inoue, Environmental Load Evaluation of Reuse Parts for Automobiles, The 3rd International Conference on Design Engineering and Science (ICDES2014), pp. 27-30, Pilsen, CZECH (2014.8.31-9.3)
Shunsuke Iijima, Masaki Takahashi and Masato Inoue, Design Method for Obtaining Diverse Possible Design Solution Sets to Adapt to Changes in Boundary Conditions, The 3rd International Conference on Design Engineering and Science (ICDES2014), pp. 180-185, Pilsen, CZECH (2014.8.31-9.3)
Masato Inoue, Shuho Yamada, Tetsuo Yamada and Stefan Bracke, Upgradable Design for Various User Demands, 11th International Conference on Product Lifecycle Management (PLM 14), Yokohama, JAPAN (2014.7.7-9)
Stefan Bracke, Masato Inoue, Berna Ulutas and Tetsuo Yamada, CDMF-RELSUS concept: Reliable and Sustainable products - Influences on design, manufacturing, layout integration and use phase, 21st CIRP Conference on Life Cycle Engineering (CIRP LCE 2014), Trondheim, NORWAY (2014.6.19).
Tomoyuki Urata, Tetsuo Yamada, Norihiro Itsubo and Masato Inoue, Model and Design of Asian Supply Chain Network Considering CO₂ Emissions, 44th Decision Sciences Institute Annual Meeting 2013, Baltimore, USA (2013.11.16-19)
Tetsu Kawasaki, Tetsuo Yamada, Norihiro Itsubo and Masato Inoue, Variation Effect of Lead Time in Designing Low Carbon Supply Chain Network including Asia, 44th Decision Sciences Institute Annual Meeting 2013, Baltimore, USA (2013.11.16-19)
Kento Igarashi, Tetsuo Yamada, Masato Inoue, Norihiro Itsubo and Surendra M Gupta, Multi Criteria Optimization Model for Disassembly Cost, Recycling Rate and Carbon Emissions, 44th Decision Sciences Institute Annual Meeting 2013, Baltimore, USA (2013.11.16-19)
Tetsuo Yamada, Norihiro Itsubo, Yuto Okudera and Masato Inoue, Environmental and Economic Buffer Allocation Problem in Sorting Disassembly System, 2013 INFORMS Annual Meeting, Minneapolis, USA (2013.10.6-9)
Jens Michalski, Tetsuo Yamada, Masato Inoue and Stefan Bracke, CDMF-RELSUS Concept: Reliable Products are Sustainable Products - Automotive Case Study "Clutch", Proceedings of 11th Global Conference on Sustainable Manufacturing -Innovative Solutions, pp. 403-407, Berlin, GERMANY (2013.9.23-25). ISBN: 978-3-7983-2609-5
Masato Inoue, Masaki Takahashi and Haruo Ishikawa, A Design Method for Unexpected Circumstances: Application to an Active Isolation System, Proceedings of 20th ISPE International Conference on Concurrent Engineering, pp. 155-162, IOS Press, Melbourne, AUSTRALIA (2013.9.4). doi: 10.3233/978-1-61499-302-5-155
Tomoyuki Urata, Tetsuo Yamada, Norihiro Itsubo and Masato Inoue, An Optimal Design for Global Supply Chain Network Considering CO₂ Emissions of Part Production, International Symposium on Scheduling 2013 (ISS2013), pp. 190-195, Tokyo, JAPAN (2013.7.20).
Yuta Yoshizaki, Tetsuo Yamada, Norihiro Itsubo and Masato Inoue, Low-Carbon Supplier Selection Using Life Cycle Inventory Database in China and Japan, International Symposium on Scheduling 2013 (ISS2013), pp. 184-189, Tokyo, JAPAN (2013.7.20).
Tetsuo Yamada, Kento Igarashi, Norihiro Itsubo and Masato Inoue, Disassembly System Design with Optimal Environmental and Economic Parts Selection Using Life Cycle Inventory Database by Input-Output Tables, Northeast Decision Sciences Institute, 2013 Annual Conference, pp. 873-878, Brooklyn, New York, USA (2013.4.5-7).
Kento Igarashi, Tetsuo Yamada, Masato Inoue, Optimal Design of Disassembly System with Environmental and Economic Parts Selection using Recyclability Evaluation Method, Proceedings of the Asia Pacific Industrial Engineering & Management Systems Conference 2012, pp. 589-599. The 13th Asia Pacific Industrial Engineering and Management Systems Conference, pp. 589-599, Patong Beach, Phuket, THAILAND (2012.12.2-5) 【The Best Student Paper Award】
Nobuyoshi Ishibai, Masato Inoue, Wataru Yamamoto, Kazuyuki Suzuki, Haruo Ishikawa, Study of Achieving the Performance for ECE-R29_03 Regulation, DEKRA Symposium Safety of Commercial Vehicles, Stuttgart, GERMANY (2012.11.8-9).
Tetsuo Yamada, Yusuke Suzuki, Tadayuki Masui, Norihiro Itsubo, Masato Inoue, Disassembly System Design with Environmental and Economic Parts Selection Using Life Cycle Inventory Database by Input-Output Tables, 10th Global Conference on Sustainable Manufacturing, Istanbul, TURKEY (2012.10.31-11.2).
Stefan Bracke, Jens Michalski, Masato Inoue and Tetsuo Yamada, CDMF-RELSUS Concept: Reliable Products are Sustainable Products - Influences on Product Design, Manufacturing and Use Phase, 10th Global Conference on Sustainable Manufacturing, Istanbul, TURKEY (2012.10.31-11.2). 【Keynote Speech】
Masato Inoue, Yoon-Eui Nahm, Kenji Tanaka and Haruo Ishikawa, Decision-Making Support for Selection of Design Ideas at the Early Phase of Structural Design, 19th ISPE International Conference on Concurrent Engineering, Trier, GERMANY (2012.9.3-7).
Kento Igarashi, Tetsuo Yamada, Masato Inoue, Disassembly System Design with Environmental and Economic Parts Selection using Recyclability Evaluation Method, International Symposium on Reliability Engineering and Risk Management (ISRERM 2012), Yokohama, JAPAN (2012.8.5-8).

招待講演

井上全人, グローバルデザイン：日本とドイツにおける教育・文化とモノのつくり方の違い，GLC Tech-Talk WEBINAR特別講演会，オンライン開催 (2022.09.29).
井上全人, 多世代使用を考慮した製品アーキテクチャ決定支援, CyFA研究分科会第3回研究例会, オンライン開催 (2021.11.4).
山田周歩，井上全人, 青山和浩，アップグレード製品設計支援におけるシステムダイナミクス活用に関する一考察, 2021年度精密工学会春季大会学術講演会, オンライン開催 (2021.03.16).
Shuho Yamada and Masato Inoue, Consideration of Reliability Issues in Provision Plan and Product Architecture of Upgradable Product Service System, 5th Symposium on Computational Reliability Engineering (CRE) in Product Development and Manufacturing, Bologna, ITALY (2019.9.10).
Masato Inoue, Shogo Miyajima, Shuho Yamada and Tetsuo Yamada, A Modular Design Strategy with Consideration of Sustainability and Supplier Selection, Japanese-German Symposium on IoT design, systems and applications 2018 (JGIoT-DSA2018), Duisburg, GERMANY (2018.11.15).
Masato Inoue, Shogo Miyajima, Shuho Yamada and Tetsuo Yamada, A Modular Design Method Considering Supply Chain, 4th Symposium on Computational Reliability Engineering (CRE) in Product Development and Manufacturing, Gdynia, POLAND (2018.9.6).
Shuho Yamada and Masato Inoue, Product Architecture Decision for Multi-Generational Product (Modularization for Component Upgrading), 4th Symposium on Computational Reliability Engineering (CRE) in Product Development and Manufacturing, Gdynia, POLAND (2018.9.6).
Masato Inoue and Shuho Yamada, Uncertainty Design and Reliability Based on a Robust Design Method, 3rd Symposium on Computational Reliability Engineering (CRE) in Product Development and Manufacturing, London, UK (2017.10.19).
Shuho Yamada and Masato Inoue, Adaptability Evaluation Method for Multi-Generational Product's Component-Lifecycle Options at the Uncertain Early Design Phase, 3rd Symposium on Computational Reliability Engineering (CRE) in Product Development and Manufacturing, London, UK (2017.10.19).
井上全人, 日本型モノづくりにおける設計者の意思決定支援, 未来展2017 オープンイノベーションカンファレンス, 名古屋市中小企業振興会館 (2017.08.30).
Shuho Yamada and Masato Inoue, Consideration of Reliability Issues within the Product Life Cycle Design, 2nd Symposium on Computational Reliability Engineering (CRE) in Product Development and Manufacturing, Dresden, GERMANY (2016.10.27).
Masato Inoue, Consideration of Reliability Issues within the Product Development Phase, 1st Symposium on Computational Reliability Engineering (CRE) in Product Development and Manufacturing, Düsseldorf, GERMANY (2015.10.22).
Masato Inoue, Japan / Fukushima: Das Tohoku Erdbeben und der Tsunami -Konsequenzen für Bevölkerungs- und Objektschutz (Japan / Fukushima: The Tohoku Earthquake and the Tsunami - Consequences regarding the protection of population and objects), University of Wuppertal, GERMANY (2013.12.4).
Masato Inoue, Design methodology for the early phase of design - Japanese product development of automotive industries -, University of Wuppertal, GERMANY (2013.12.4).

解説/国際会議論文（査読無）

山田周歩，井上全人，セットベース設計手法のアップグレード製品設計への適用（副作用への対応とアップグレード計画の策定），設計工学, Vol. 57, No. 9, pp. 441-446，(2022.09).
井上全人，多様なユーザ価値に対応する感性設計，設計工学, Vol. 57, No. 2, pp. 65-70，(2022.02).
山田哲男，木下雄貴，長沢敬祐，山田周歩，井上全人，北田皓嗣，石垣綾，炭素税と経済連携協定を考慮したグローカルサプライ・再製造チェーンのIoTビジネスモデル構築，システム/制御/情報, Vol. 64, No. 10, pp. 394-402，(2020.10).
長谷部莉南，宮島尚吾，山田周歩，山田哲男，井上全人，モジュール型製品のためのサプライチェーン決定手法，設計工学, Vol. 55, No. 8, pp. 488-492, (2020.08).
井上全人，システムの構想設計～代替案選択の意思決定支援手法の適用～，機械設計, 日刊工業新聞社，第63巻第10号，pp. 30-35，(2019.09).
井上全人，塾員来往 [153回]，慶應義塾大学理工学部, (2018.07).
島田雅仁，村田祥明，山田周歩，井上全人，学生設計コンテスト2015への参加－明治大学チームの事例－，設計工学, Vol. 52, No. 8, pp. 11-12, (2017.08).
満倉靖恵，関研一，井上全人，森田小百合，西村秀和，感性をリアルタイムで測り製品に生かす試み（“デライト”を科学する），設計工学, Vol. 52, No. 7, pp. 14-18, (2017.07).
Chise Shibata, Shuho Yamada, Tetsuo Yamada, Stefan Bracke, and Masato Inoue, Adaptability Evaluation for Life Cycle Design of Components, The 2nd Mechanical Engineering Workshop between UTM and Meiji University, Kuala Lumpur, MALAYSIA (2017.3.2).
Ryosuke Okada, Yoshiaki Murata, Yosuke Takeuchi, and Masato Inoue, Searching Method for Solution Principles at the Conceptual Design Phase Based on Set-Based Design, The 2nd Mechanical Engineering Workshop between UTM and Meiji University, Kuala Lumpur, MALAYSIA (2017.3.2).
Shota Yamazaki, Wataru Suzuki, Shuho Yamada, and Masato Inoue, A Universal Design method for Diversity of User Requirements, The 2nd Mechanical Engineering Workshop between UTM and Meiji University, Kuala Lumpur, MALAYSIA (2017.3.2).
Yuka Mizukura, Kosuke Kidokoro, Shuho Yamada, Zenichi Miyagi, and Masato Inoue, Proposal of a Robust Design Method for T-peel Test Apparatus Based on Set-based Design, The 2nd Mechanical Engineering Workshop between UTM and Meiji University, Kuala Lumpur, MALAYSIA (2017.3.2).
井上全人，Stefan Bracke, ドイツ・Wuppertal大学での研究滞在記－革新のドイツ，最適化の日本－，シミュレーション, 第35巻第4号, pp. 76-78, (2016.12).
井上全人，古き良きを大切にする革新的なドイツ，明治, No. 72, pp. 52-53, (2016.10).
Yoshiaki Murata, Masaki Takahashi, Shunsuke Iijima, Yosuke Takeuchi, and Masato Inoue, Design Method for Obtaining Diverse Design Solution Sets from Dynamic Simulations: Case Study of a Control Design for Isolation System, 10th International Symposium on Mechanics, Aerospace and Informatics Engineering (ISMAI-10), pp. 126-129, ISBN: 978-89-94266-21-3, Gyeongnam, KOREA (2015.9.17-20).
Masato Shimada, Wataru Suzuki, Shuho Yamada, Yosuke Takeuchi, Wannes van den Bossche, and Masato Inoue, Proposal of a Universal Design Method for Reflecting Physical Characteristics of Diverse Users -Case study of a bicycle frame-, 10th International Symposium on Mechanics, Aerospace and Informatics Engineering (ISMAI-10), pp. 117-119, ISBN: 978-89-94266-21-3, Gyeongnam, KOREA (2015.9.17-20).
井上全人，設計システム（井上）研究室，設計工学, Vol. 50, No. 7, p. 355, (2015.7).
石灰伸好，井上全人，山本渉，鈴木和幸，石川晴雄，車両開発の初期構想段階におけるトポロジーと形状の同時満足化設計－セットベース設計手法のトラックのシャシフレーム設計への適用，日野技報, No. 64, pp. 88-95, (2014.6).
Takuya Ninomiya, Masaki Takahashi, Masato Inoue, A Design Method for Unexpected Circumstances, 7th International Symposium on Mechanics, Aerospace and Informatics Engineering (ISMAI07), Hakone, JAPAN (2013.2.21).

国内学会口頭発表

中村陽，井上全人，感性設計プロセスにおけるユーザニーズと設計変数の関連強度指標の提案，Designシンポジウム2023 @ 建築会館，(2023.10.8).
宮澤健太郎，安藤聖和，中川裕介，井上全人，設計意図を反映した評価指標に基づくロバスト設計手法の提案―フロントサイドメンバの構造設計への適用―，Designシンポジウム2023 @ 建築会館，(2023.10.8).
大久保璃子，井上全人，ユーザニーズと設計仕様の関係性の可視化手法―SNSのUI設計への適用，Designシンポジウム2023 @ 建築会館，(2023.10.8).
清水澤義和，松田珠里，山内智幸，井上全人，モーションキャプチャによる動作解析に基づくユニバーサルデザイン手法の提案，Designシンポジウム2023 @ 建築会館，(2023.10.8).
小松侑暉，山田周歩，井上全人，サプライチェーンを考慮した製品アーキテクチャ設計支援（輸送手段ごとの配送能力に基づく評価モデル），日本機械学会第33回設計工学・システム部門講演会 @ 金沢商工会議所，(2023.9.19).
阿久津大地，近藤秀一，平松繁喜，福井誠志，宇根崎弘，波多野崇，青山和浩，井上全人，設計変数間の拘束関係を用いた高次元設計解空間の可視化手法，日本機械学会第33回設計工学・システム部門講演会 @ 金沢商工会議所，(2023.9.20).
山田周歩，堀内郁矢，井上全人，藤田光伸，早川明宏，森孝男，自動車リビルト部品の利用による環境負荷削減効果の評価（AC コンプレッサ，スタータ，オルタネータの事例），日本機械学会第33回設計工学・システム部門講演会 @ 金沢商工会議所，(2023.9.21).
古川修, 萩原一郎, 井上全人, 間下博, 加世山秀樹，ターゲットライン方式自動運転システムの開発，第20回ITSシンポジウム2022@柏の葉カンファレンスセンター，(2022.12.08).
荒木健也，川南剛，井上全人，階層化AMR磁気ヒートポンプにおける磁気熱量効果材料の設計手法，第11回潜熱工学シンポジウム@ 北海道大学，(2022.10.31).
山田周歩，堀内郁矢，井上全人，藤田光伸，早川明宏，青木累，森孝男，リビルトコンプレッサ使用による環境負荷削減効果，日本設計工学会2022年度秋季大会研究発表講演会@ 名城大学，(2022.10.15).
末木拓実，石川智也，川南剛，井上全人，視覚・聴覚刺激による感性情報を用いた室内環境の快適性評価，日本設計工学会2022年度秋季大会研究発表講演会@ 名城大学，(2022.10.15).
大塚耀，肉眼では見えにくい特殊塗料を用いたライントレース方式自動運転システム，自動車技術会2022年秋季大会@ グランキューブ大阪，(2022.10.13).【優秀ポスターセッション賞】
大塚耀，櫻木麻美子，井上全人，評価グリッド法を応用した感性設計プロセスにおけるユーザニーズの分類手法，日本機械学会第32回設計工学・システム部門講演会 @ 岡山県立大学，(2022.9.21).
阿久津大地，大塚耀，宮澤健太郎，小松侑暉，末木拓実，上村健一郎，上田斯綺，中村陽，清水澤義和，見学潤，井上全人，ターゲットライン方式を用いた自動走行サービスの社会実装，日本機械学会第32回設計工学・システム部門講演会 @ 岡山県立大学，(2022.9.21).
石建慶悟，望月裕太，井上全人，設計意図を反映した代替案選択の概念設計支援，1DCAE・MBDシンポジウム2021 @ オンライン開催，(2021.12.8-10).
石川智也，Fatin Husna Binti Othman，川南剛，井上全人，視覚・聴覚情報が温冷感に及ぼす影響評価，日本機械学会第31回設計工学・システム部門講演会 @ 日立製作所（オンライン），(2021.9.16).【優秀講演論文表彰】
櫻木麻美子，山口凜平，石川智也，井上全人，潜在価値を含む少数ニーズの抽出とそれらを反映した感性設計手法，Designシンポジウム2021 @ 東京大学（オンライン），(2021.7.14-16).
石川智也，Fatin Husna Binti Othman，山口凛平，櫻木麻美子，山田周歩，川南剛，井上全人，生体計測に基づく温冷感に及ぼす感覚情報の影響評価，日本機械学会第30回設計工学・システム部門講演会 @ 同志社大学（オンライン），(2020.11.26).
櫻木麻美子，田中健人，山口凜平，石川智也，山田周歩，井上全人，多様なユーザニーズと関連する設計変数を抽出する評価グリッド法システム，日本機械学会第30回設計工学・システム部門講演会 @ 同志社大学（オンライン），(2020.11.26).
長谷部莉南，山田周歩，藤原健太郎，山田哲男，井上全人，製造リードタイムを考慮した製品アーキテクチャとそのサプライチェーン決定支援，日本機械学会第30回設計工学・システム部門講演会 @ 同志社大学（オンライン），(2020.11.27).
松田理沙，小野田裕太，荒木健也，山田周歩，井上全人，設計変更に対応する設計修正指針を提示する意思決定支援システム，日本機械学会第30回設計工学・システム部門講演会 @ 同志社大学（オンライン），(2020.11.28).
加藤勇吹，中島孝行，山田周歩，山田哲男，井上全人，作業者の多様な身体特性と身体負荷を考慮した設備のユニバーサルデザイン手法の提案，日本設備管理学会2020年度春季研究発表大会 @ 電気通信大学（講演論文集発行）， (2020.6.4).
望月裕太，山田周歩，井上全人，1DCAEに基づく概念設計における代替案選択の意思決定支援，1DCAE・MBDシンポジウム2019 @ ミューザ川崎市民交流室，(2019.12.4-5).
依田一稀，入江颯，山田哲男，山田周歩，井上全人，再組立を考慮した分解部品選択に関する一考察，日本設備管理学会2019年度秋季研究発表大会 @ 秋田県立大学， (2019.11.28-29).
小野田裕太，佐藤伸樹，山田周歩，井上全人，設計変更に対応するための意思決定支援システム，Designシンポジウム2019 @ 慶應義塾大学，(2019.11.16-17).
小林峻，藤田光伸，森孝男，早川明宏，杉本淳二，井上全人，自動車補修オプションの製品価値・環境負荷・コストの観点による適合性評価（自動車エンジンへの適用），日本機械学会第29回設計工学・システム部門講演会 @ 東北大学，(2019.9.25-27).
金田郁可，山田周歩，山田哲男，井上全人，循環型製品におけるライフサイクルオプションの意思決定支援手法（環境負荷，コスト，物理寿命を含む複数視点に基づく適合性評価），日本設計工学会2019年度秋季研究発表講演会 @ 大阪電気通信大学，pp. 157-160，(2019.9.14).
長谷部莉南，宮島尚吾，山田周歩，山田哲男，井上全人，モジュール型製品のためのサプライチェーン決定手法，日本設計工学会2019年度秋季研究発表講演会 @ 大阪電気通信大学，pp. 75-78，(2019.9.13).【（公社）日本設計工学会 2019年度秋季大会研究発表講演会学生優秀発表賞・指導教員賞】
山口凜平，山崎翔太，山田周歩，石川智也，井上全人，生体信号の計測に基づく感性ニーズを満足する解を導出する設計手法の提案，ヒューマンインタフェースシンポジウム2019 @ 同志社大学，(2019.9.2-5).
望月裕太，岡田涼佑，井上全人，概念設計における代替案選択の意思決定支援，日本設計工学会2019年度春季研究発表講演会 @ 関東学院大学，(2019.5.25-26).
山田周歩，山田哲男，井上全人，複数の顧客セグメントを想定したライフサイクルオプション適合性判断指標の提案，日本機械学会第28回設計工学・システム部門講演会 @ 読谷村，(2018.11.4-6).
宮島尚吾，山田周歩，山田哲男，井上全人，多世代使用を考慮したアップグレード製品のアーキテクチャ設計手法，日本機械学会第28回設計工学・システム部門講演会 @ 読谷村，(2018.11.4-6).
中島孝行, 島田雅仁，井上全人，デジタルヒューマンモデルを用いた身体的負担感を考慮したユニバーサルデザイン手法（作業台高さの設計問題への適用），日本機械学会第28回設計工学・システム部門講演会 @ 読谷村，(2018.11.4-6).
佐藤伸樹，村田祥明，井上全人，設計意図の可視化による設計初期段階における意思決定支援システム，日本機械学会第28回設計工学・システム部門講演会 @ 読谷村，(2018.11.4-6).
軽部達也，水庫優果，宮城善一，井上全人，ロバスト設計に基づく不確実性設計（剥離試験装置設計への適用），日本機械学会第28回設計工学・システム部門講演会 @ 読谷村，(2018.11.4-6).
小林峻，岡本拓也，藤田光伸，森孝男，早川明宏，井上全人，リビルトエンジン使用による二酸化炭素排出量削減効果，日本機械学会第28回設計工学・システム部門講演会 @ 読谷村，(2018.11.4-6).
山崎翔太，黒田衛，井上全人，ユーザの評価構造の可視化およびニーズに寄与する設計パラメータの抽出，日本設計工学会2018年度秋季研究発表講演会 @ 鳥取大学，(2018.9.29).
宮島尚吾，山田周歩，山田哲男，井上全人，サプライチェーンを考慮したモジュール設計手法の提案（環境負荷，コスト，品質，リードタイムによる総合評価），日本設計工学会2018年度春季研究発表講演会 @ 東京大学，(2018.5.26-27).
山田周歩，舘野寿丈，井上全人，設計製図教育における設計計算とCAEの関係性学習の試み，日本設計工学会2017年度秋季研究発表講演会 @ 新居浜高専，(2017.10.8).
島田雅仁，井上全人，ユーザの身体特性と負担感を考慮したユニバーサルデザイン手法の提案（自転車フレームの設計問題への適用），日本設計工学会2017年度秋季研究発表講演会 @ 新居浜高専，pp. 109-110，(2017.10.8).
岡本拓也，藤田光伸，森孝男，玉木基裕，早川明宏，井上全人，自動車リユース部品のトータルパフォーマンス評価（エンジンおよびフロントバンパへの適用），日本設計工学会2017年度秋季研究発表講演会 @ 新居浜高専，pp. 105-108，(2017.10.8).
水庫優果，山田周歩，宮城善一，井上全人，セットベース概念に基づくロバスト設計手法の提案（剥離試験装置の実験計画と構造設計への適用），日本設計工学会2017年度秋季研究発表講演会 @ 新居浜高専，pp. 111-114，(2017.10.8).
山田周歩，柴田知世，山田哲男，井上全人，多世代製品の部品ライフサイクルオプション適合性評価手法の提案 (顧客要求，製造コスト，環境負荷量，物理寿命による総合評価)，日本機械学会第27回設計工学・システム部門講演会 @ 海峡メッセ下関，(2017.9.13-15).
長谷川翔太，山田哲男，木下雄貴，井上全人，リユースを考慮した分解部品選択問題，日本機械学会生産システム部門講演会 2017 @ 埼玉大学，(2017.3.16).
木下雄貴，山田哲男，井上全人，環境負荷およびコストを持つ組立・分解システムのモデル化と素材選択，日本経営工学会生産物流部門第5回産学交流ワークショップ @ TRI臨床研究情報センター，(2017.3.7).
中村謙吾, 伊集院大将，山田哲男，井上全人，関税を考慮したグローバル・サプライチェーンネットワークのモデル化，日本設備管理学会平成28年度秋季研究発表大会論文集 @ 名古屋，(2016.11.24).
近藤礼奈, 木下雄貴, 山田哲男, 伊坪徳宏，井上全人，ライフサイクルインベントリデータベースを用いたアジア製組立製品のサプライヤー選択，日本設備管理学会平成28年度秋季研究発表大会論文集 @ 名古屋，(2016.11.24).
柴田知世，山田周歩，山田哲男，井上全人，製品のアップグレード設計への適合性評価－ノートパソコンの設計問題への適用，日本機械学会第26回設計工学・システム部門講演会 @ 慶應義塾大学，(2016.10.9).
鈴木航，島田雅仁，山田周歩，井上全人，ユーザの多様なニーズを反映した設計範囲解を導出するプロダクトユニバーサルデザイン手法の提案（シャープペンシルのデザインへの適用），日本設計工学会2016年度秋季研究発表講演会 @ 北九州国際会議場，(2016.10.8).
城所昂佑，山田周歩，宮城善一，井上全人，セットベース設計手法に基づく剥離試験装置のロバスト設計，日本設計工学会2016年度春季研究発表講演会 @ 東京工業大学，(2016.5.27-30).
島田雅仁，村田祥明，山田周歩，井上全人，学生設計コンテスト2016への参加（明治大学チームの事例），日本設計工学会2016年度春季研究発表講演会 @ 東京工業大学，(2016.5.27-30).
【（公社）日本設計工学会平成28年度春季大会研究発表講演会学生優秀発表賞・指導教員賞】
高橋颯太，岩崎誠和，藤田光伸，森孝男，鈴木廉，鈴木雄大，玉木基裕，杉本淳二，石塚克美，乙幡勝三，鈴木成幸，小林謙六，谷洋紀，早川明宏，井上全人，温室効果ガス排出削減量評価の算定および公開事例－自動車リユース主要50部品－，第11回日本LCA学会研究発表会 @ 東京大学，(2016.3.4).
山田周歩，中川淳，山田哲男，中野勝行，井上全人，企業の収益性と環境活動を両立するアップグレード製品設計手法－リースパソコンへの事例適用，日本機械学会第25回設計工学・システム部門講演会 @ 信州大学，(2015.9.23-25).
鈴木航，井上全人，身体特性のばらつきを有するユーザ特徴を考慮したユニバーサルデザイン手法の提案―電車内つり手高さの設計問題への適用―，日本設計工学会2015年度春季研究発表講演会 @ 日本大学，(2015.5.30-31).
車谷和彦，山田哲男，伊坪徳宏，井上全人，アジア国際産業連関表によるライフサイクルインベントリデータベースを用いた新興国と先進国間のサプライヤー選択，第10回日本LCA学会研究発表会 @ 神戸大学，(2015.3.10).
木下雄貴，山田哲男，浦田智幸，山田周歩，井上全人，製品の違いによる作業コストと組立・分解システムの比較考察，日本設備管理学会平成26年度秋季研究発表大会 @ 秋田県立大学，(2014.11.11).
佐々木直子，石川晴雄，草香孝二，井上全人，機械系学部生に対する設計教育を通じた環境教育支援システム，日本設計工学会2014年度秋季研究発表講演会 @ 山形大学，(2014.10.4).
山田周歩，山田哲男，井上全人，生産時の環境負荷削減に向けたアップグレード製品設計手法，日本機械学会第24回設計工学・システム部門講演会 @ 徳島大学，(2014.9.19).
鈴木航，井上全人，ユーザの身体特性のばらつきを考慮したユニバーサルデザイン手法，日本機械学会第24回設計工学・システム部門講演会 @ 徳島大学，(2014.9.18).
高橋颯太，岩崎誠和，藤田光伸，森孝男，玉木基裕，佐野明彦，谷洋紀，早川明宏，井上全人，自動車解体工場調査に基づくリユース部品使用時の環境負荷削減効果，日本機械学会第24回設計工学・システム部門講演会 @ 徳島大学，(2014.9.18).【（一社）日本機械学会設計工学・システム部門 D&Sコンテスト優秀表彰】
井上全人，不確実条件下における設計・意思決定支援，日本機械学会第40回 A-TS12-05設計研究会 @ 明治大学生田キャンパス，(2014.8.19).
浦田智幸，山田哲男，五十嵐健人，井上全人，作業のコストと先行順位関係に関する組立と分解の比較考察，日本設備管理学会平成26年度春季研究発表大会 @ 早稲田大学，pp. 31-36, (2014.5.29).
河崎徹，山田哲男，伊坪徳宏，井上全人，リードタイムの変動を考慮した低炭素型グローバル・サプライチェーンネットワークのシミュレーション分析，日本設備管理学会平成26年度春季研究発表大会 @ 早稲田大学，pp. 31-36, (2014.5.29).
山田周歩，山田哲男，井上全人，異なるユーザ要求を考慮したアップグレード製品設計方法の提案，日本設計工学会2014年度春季研究発表講演会 @ 明治大学中野キャンパス，(2014.5.24-25).
岩崎誠和，藤田光伸，森孝男，佐々木顕彦，玉木基裕，佐野明彦，谷洋紀，早川明宏，井上全人，自動車のリユース部品使用によるCO₂排出量の削減効果（自動車解体工場調査およびドアミラーとドアパネルのLCA解析），日本設計工学会2014年度春季研究発表講演会 @ 明治大学中野キャンパス，(2014.5.24-25).
飯島駿輔，井上全人，初期設計段階における境界条件の変化に対応する設計方法の提案，日本設計工学会2014年度春季研究発表講演会 @ 明治大学中野キャンパス，(2014.5.24-25).
【（公社）日本設計工学会平成26年度春季大会研究発表講演会学生優秀発表賞・指導教員賞】
吉崎裕太，山田哲男，伊坪徳宏，井上全人，アジア・欧州のライフサイクルインベントリデータベースを利用した温室効果ガスと経済性の部品表構築，日本経営工学会2014年春季大会 @ 東京理科大学，(2014.5.17-18).
吉崎裕太，山田哲男，伊坪徳宏，井上全人，アジア国際産業連関表によるインベントリデータベースを用いたサプライヤー選択の低炭素化，日本機械学会生産システム部門研究発表講演会2014 @ 電気通信大学，(2014.3.17).
井上全人，浅田大介，加藤修一，石灰伸好，石川晴雄，位相構造の違いを含む多目的満足解集合を導出するための構造設計手法の提案，第23回日本機械学会設計工学・システム部門講演会 @ 読谷村，(2013.10.23).
石灰伸好，井上全人，山本渉，鈴木和幸，石川晴雄，車両開発の初期構想段階におけるトポロジーと形状の同時満足化設計，2013年自動車技術会秋季大会 @ 名古屋国際会場，(2013.10.23).
井上全人，石川晴雄，セットベース設計概念に基づく構造形態の決定支援方法の提案，第22回日本機械学会設計工学・システム部門講演会 @ 広島大学，pp. 324-329, (2012.9.26-28).
五十嵐健人，山田哲男，井上全人，西隆之，荒川雅裕，リサイクル性評価法を用いた取り外し部品の選択を持つ分解システム設計，日本経営工学会平成24年度春季大会 @ 法政大学，(2012.5.26-27).

▲
PAGE
TOP