(31) Z.D. Ma,N. Kikuchi,I.Hagiwara, Structural topology and shape optimization for a frequency response problem,Computational Mechanics13:57-174
(1992-1).
(32) 小机、萩原、馬、高次と低次のモードの省略可能な新しいモード合成技術の開発、第５報、新手法の車両モデルでの精度確認と車室内騒音低減設計時の利用方法の検討、日本機械学会論文(C編)、58巻546号(1992-2月)、pp.643-648.
(33) Z.D.Ma and I.Hagiwara,Sensitivity Calculation Methods forConducting Modal Frequency Response Analysis of Coupled Acoustic-Structural
Systems,JSME International Journal Series III,Vol.35,No.1(1992-3月),pp.14-21.
(34) I.Hagiwara and Z.D.Ma ,A. Arai and K. Nagabuchi, Reduction of Vehicle Interior Noise Using Structural-Acoustic Sensitivity Analysis
Methods ,1991 SAE 910208 Transaction Section 6(1992-4月) , pp.267-276．
(35) Y. Kitagawa, I. Hagiwara and M. Tsuda, Development of a Collapse Mode Control Method　for Side Members in VehicleCollisions, SAE
910809 1991 Transaction Section 6 (1992-4月),pp1101-1107.
(36) Y. Kitagawa, I. Hagiwara and M.Tsuda,Dynamic Analysis of Thin-Walled Columns with Arbitrary Section Geometry Subjected to Axial Crushing, JSME International Journal　Series I,Vol.35,No.2,(1992-4月),pp.189-193.
(37) Y.Kitagawa, I.Hagiwara and T.Torigaki, A Sensitivity Analysis for　Dynamic Buckling Problesms,ATA Innocation and Reliability in Automotive Design and Testing Vol.3 (1992-4月),pp1739-1748.
(38) I.Hagiwara and Z.D. Ma,Development of Eigenmode and Frequency Response Sensitivity Analysis Methods for Coupled Acoustic-Structural Systems, JSME International Journal　Series III,Vol.35,No.2(1992-6月),pp.229-235.
(39) I.Hagiwara and Z.D. Ma, A. Arai and K. Nagabuchi, Reducing Noise by Structural-Acoustic Sensitivity Analysis,　Automotive TechnologyInternational '92(1992-7月) ,pp.339-342.
(40) 北川、萩原、鳥垣、衝撃非線形問題における感度解析手法の開発（第２報）、日本機械学会論文集（A編）、58巻552号(1992-8月)、pp.1430-1437.
(41) 北川、萩原、鳥垣、衝撃非線形問題における感度解析手法の開発（第３報）、日本機械学会論文集（A編）、58巻554号(1992-10月)、pp.1817-1820.
(42) Y. Kitagawa,I. Hagiwara and T.Torigaki,Development of a Sensitivity Analysis Methodfor Dynamic Nonlinear Problems, JSME International Journal Series I, Vol.35,No.4(1992-10月),pp.523-528.
(43)　依知川、萩原、馬、高次と低次のモードの省略可能なモード合成法に基づく部分構造合成法の開発（第１報：振動時刻歴応答問題 への適用）、日本機械学会論文集（C編）、58巻555号(1992-11月)、pp.3203-3207.
(44) Z.D. Ma,N. Kikuchi , and I. Hagiwara, Structural　Topology/ShapeOptimizationfor a Response Problem,　Computational Mechanics ,Vol.13,No.3(1993),pp.157-174.
(45) パル、榧場、森下、萩原、ニューラルネットワークによる動的システムの時系列同定（第１報、誤差逆伝播法に基づく高速学習法）、日本機械学会論文集（C編）、59巻561号（1993-5月）、pp.1436-1442.
(46) 馬、菊池、鄭、萩原、振動低減のための構造最適化手法の開発（第一報：ホモジェニゼーション方法を用いた構造最適化理論）、日本機械学会論文集（C編）、59巻562号（1993-6月）、pp.1730-1736.
(47) I. Hagiwara, W.Kozukue and Y.Kitagawa,Advanced SensitivityAnalysisTechniques for Improving Automobile Noise & Vibration and CrashworthinessCharacteristics,Design-Sensitiv　Analysis,ATLANTA TECHNOLOGYPUBLICATIONS,　M.Kleiberand T.Hisada ed.(1993-7月).
(48) L. H. Tenek and I. Hagiwara , Static and Vibrational Shapeand Topology　Optimization Using Homogenization and Mathematical　Programming,Comput.Methodsin Appl.Mech.Engrg. ,Vol.109 (1993-10月),pp.143-154.
(49) L.H. Tenek and I. Hagiwara , Optimization of MaterialDistribution　within Isotropic and Anisotropic Plates Using Homogenization,　Comput.Methods in Appl.Mech.Engrg. Vol.109(1993-10月),pp.155-167.
(50) I.Hagiwara, K.Nagabuchi and A.Arai, Study of　Structure Identification Method using Sensitivity Analysis for　Vibration,Finite Elements in Analysis and Design　Elsevier,Vol.14,No.2&3(1993-10月), pp.111-126.
(51) Z.D. Ma and I.Hagiwara,Development of New Mode-superpositiontechnique for Modal Frequency Response Analysis of Coupled Acoustic-StructuralSystems,Finite Elements in Analysis and Design Elsevier,Vol.14, No.2&3(1993-10月),pp.209-223.
(52) C.M. Pal and I.Hagiwara,Development of Eigenmode SensitivityAnalysis Methods for Coupled Acoustic-Structural Systems and Its ApplicationtoVehicle Interior Noise Problems ,Finite Elements in Analysis and DesignElsevier,Vol.14, No.2&3(1993-10月),pp.225-234.
(53) I.Hagiwara,W.Kozukue and Z.D.Ma,Development of Eigenmode SensitivityAnalysis Methods for Coupled Acoustic-Structural Systems and Its Applicationto Reduction ofVehicle Interior Noise, Finite Elements in Analysis andDesign, Elsevier,Vol.14, No.2&3 (1993-10月),pp.235-248.
(54) 小机、萩原、音圧レベル積分感度を用いた車室内騒音低減解析、日本機械学会論文(C編),59巻568号(1993-12月)、pp.3845-3851.
(55)萩原一郎、自動車の騒音振動問題における新しいと新しい数値解法、応用数理招待論文、Vol.3,No.4(1993-12),pp.2-16.
(56) Z.D. Ma,N. Kikuchi,I.Hagiwara, Structural topology and shape optimization for a frequency response problem, December 1993
• Computational Mechanics 13(3)DOI: 10.1007/BF00370133
(57) 依知川、萩原、大規模高周波振動応答問題のための部分構造合成法とこれに基づく減衰系の周波数応答解析、日本機械学会論文集（C編）、60巻569号(1994-1月)、pp10-15.
(58) C. M. Pal, I. Hagiwara, N.Kayaba, and S. Morishita, Dynamic System Identification by Neural Network:A New Fast Learning Method
Based on Error Back Propagation, Journal of INTELLIGENT MATERIAL SYSTEMS and STRUCTURES,Vol.5,No.1(1994-1月),pp.127-135.
(59) T. Torigaki,I. Hagiwara ,Y. Kitagawa , M. Ueda, Z.D. MaandN.Kikuchi, Development and Application of a Shape-Topology OptimizationSystem Using a Homogenization Method, SAE International Congress and Exposition(1994-3月).
(60) Z.D. Ma and I.Hagiwara, Development of a New Mode-Superposition Techniquefor Truncating- Lower and /or Higher-Frequency Modes(Application of EigenmodeSensitivity Analysis Method for Systems with Repeated Eigenvalues) , JSMEInternational Journal Series C,Vol.37,No.1(1994-3月),pp.7-13.
(61) I. Hagiwara and Z.D. Ma, Development of a New Mode-Superposition Technique for Truncating Lower- and / or Higher-Frequency Modes ( Application for Eigenmode Sensitivity Analysis ) JSME International Journal Series C, Vol.37,No.1 (1994-3月),pp.14-20.
(62) パル、榧場、森下、萩原、擬似逆行列を用いたニューラルネットワークの学習法、 日本機械学会論文集（C編）、60巻573号 (1994-5月)、pp.1699-1704.
(63) 小机、萩原、馬、新しいモーダル周波数応答解析技術の開発, 日本応用数理学会論文集、Vol.4,No.2(1994-6月),pp.141-164.
W.Kozukue,I.hagiwara,Z.d.Ma,Development of New Modal Frequency Response Sensitivity analysis method for truncating the Lower and/or Higher Frequency Modes, Transactions of the Japan Society for Industrical and Applied Mathematics、Vol.4,No.2(1994-6月),pp.141-164 in Japanese.
(64) C. M. Pal and I. Hagiwara , Optimization of Noise LevelReduction by Truncated Modal Coupled Structural-Acoustic Sensitivity
Analysis ,JSME International Journal Series C, Vol.37,No.2 (1994-6月)pp.246-251.
(65) 森下、宇根、チンモイパル、萩原、Tabu探索法によるニューラルネットワークの新しい学習法,日本機械学会論文集(C編)、 60巻575号 (1994-7月)、pp.2377-2382.
(66) L. H. Tenek and I. Hagiwara , Optimal Plate andShellTopologies Using Thickness Distribution or Homogenization,
Comput. Methods in Appl.Mech.Engrg. Vol.115(1994-7月)Nos.1&2,pp.111-124.
(67)　馬、菊池、萩原、鳥垣、振動低減のための構造最適化手法の開発（第二報：新しい最適化アルゴリズム）、日本機械学会論文（C編）、60巻577号(1994-9月)、pp.3018-3024.
(68) L. H. Tenek and I. Hagiwara , Eigenfrequency Maximizationof Plates by Optimization of Topology Using Homoginization and MathematicalPrograming, JSME International Journal Series C,Vol.37,No.4 (1994-12月) pp.667-677.
(69) Z.D. Ma,N. Kikuchi, H.C. Cheng and I. Hagiwara,TopologicalOptimization Technique for Free Vibration Problems , ASME Journal ofAppliedMechanics,Vol.62(1995-3),pp.201-207.
(70) L. H. Tenek and I. Hagiwara , A Substructure Method IncorporatingHomogenization for Finding Optimum Vehicle Body Panel Topologies JSME International Journal Series I,Vol.38,No.1(1995-1月),pp.44-51.
(71) W.Kozukue , and I. Hagiwara, Development of Sound PressureLevelIntegral Sensitivity and Its Application to Vehicle Interior Noise Reduction,Engineering Computations,Vol.13,No.5(1996),pp.91-107.
(72) 小机、萩原、均質化法と積分感度を用いた車室内騒音低減位相最適化解析、 日本機械学会論文集(C編),61巻586号 (1995-7月)、pp.2746-2752.
(73) 依知川、萩原、大規模構造ー音場連成問題のための部分構造合成法の開発、日本機械学会論文集(C編),61巻586号 (1995-7月)、pp.2718-2724.
(74)萩原、テネック、複合材積層板の複数の固有振動数を制御する位相最適化手法の開発、 日本機械学会論文集(C編),61巻586号 (1995-7月)、pp.2675-2682.
(75) C.Pal, N.Kayaba, S.Morishita and I. Hagiwara, DynamicSystem Identification by Neural Network (A New Fast Learning Method Basedon
Error Back Propagation), JSME International Journal, Vol.38, No.4(1995-12月)
(76) T. Ichikawa and I. Hagiwara, Frequency Response Analysis of Large-ScaleDamped Structures using Component Mode Synthesis, JSME International JournalSeries III,Vol.39,No.3(1996-9月)、pp.450-455.
(77) Deng-Li, 加古孝、萩原一郎、構造・音場固有ペアから連成固有ペアを誘導する手法の開発（第１報、有限摂動展開法からの誘導）、日本機械学会論文集(C)編、63巻614号(1997-10)、pp.3446-3453.
(78) M.Arakawa, T.Ohashi, andI.Hagiwara, Automatic PortraitDetection by Using Adaptive Range GenticAlgorithms, Proc. of Int. Symp.on System Life, No. 97-209,JSME, (1997), 199-204.
(79) 萩原、施、小机、目的関数のニューラルネットワーク推定による衝撃最適設計法の開発、日本機械学会論文集(A編),63巻616号 (1997-12月)、pp.2510-2517.
(80)荒川，萩原,実数領域適応型(ARRange)遺伝的アルゴリズムの開発,日本機械学会論文集(Ｃ編),63巻616号 (1997-12月)、pp.4216-4223.
(81)萩原、井上、施、ニューラルネットワークと計算力学に基づくシステム同定の検討、日本機械学会論文集(C編),64巻621号 (1997-5月)、pp.1574-1579.
(82)荒川，萩原,領域適応型遺伝的アルゴリズムの混合変数非線形最適設計への適用,日本機械学会論文集(Ｃ編),64巻621号 (1998-5月)、pp.4216-4223.
(83)荒川，萩原,山川、複数の許容設計解を得るための採餌適応戦略遺伝的アルゴリズム,日本機械学会論文集(Ｃ編),64巻622号 (1998-6月)、
pp.2155-2161.
(84)荒川，Jouchee KUM,萩原,山川、定性的な感性評価に基づく定性的な最適設計に関する研究（高能率を引き出す椅子の開発）,日本機械学会論文集(Ｃ編),64巻622号 (1998-6月)、pp.2162-2168.
(85) 津田、萩原、準静的大変形問題の動的陽解法有限要素法に関する基礎検討、日本機械学会論文集(A編),64巻622号 (1998-6月)、pp.1548-1555.
(86) 施、萩原、畔津、依知川、ホログラフィックニューラルネットワークを用いた音響最適設計、自動車技術会論文集,29巻３号 (1998-７月)、pp.93-98.
(87)施、萩原、ニューラルネットワークと計算力学に基づくシステム同定の検討、第２報；計測点の低減法に関する研究、日本機械学会論文集(C編),64巻625号(1998-9月)、pp.3375-3382.
(88) 萩原、施、高島、目的関数のニューラルネットワーク推定による衝撃最適設計法の開発（第２報：車両部品構造への適用）、日本機械学会論文集(A編),64巻626号 (1998-10月)、pp.2441-2447.
(89) 施、萩原、高島、曲面応答法による多峰性問題の最適設計法の開発、日本機械学会論文集(A編),65巻630号 (1999-2月)、pp.232-239.
(90) Q. Shi, I Hagiwara, S. Azetsu, T. Ichikawa, Holographic Neural NetworkApproximations for Acoustics Optimization, JSAE Review, Japan Society ofAutomobile Engineering, Vol.19 No.4 (1998-10), pp.361-363.
(91)Z.Rao,Q. Shi and I. Hagiwara,Optimal Estimation of Dynamic Loadsfor Multiple-Input System,Transactions of ASME Journal of Vibration andAcoustics',Volume121(1999-7),pp.397-401.
(92)M. Arakawa, and H.Hagaiwara, Development of Adaptive RealRange (ARRange)GeneticAlgorithms,"JSME International Journal, Series C,Vol. 41.No. 4(1998-12),pp.969-977.
(93) M.Arakawa, I.Hagiwara, and H.Yamakawa, Foraging Strategic GeneticAlgorithms To Obtain Multiple Acceptable Designs, JSME International Journal,Series C,Vol.42,No.1,1999,pp.240-247.
(94)荒川雅生、萩原一郎、山川宏、ファジイ数を用いたロバスト設計の検討、
日本機械学会論文集(C編)、65巻632号(1999-4),pp.1600-1607.
(95)施勤忠、萩原一郎、関根俊彰、ニューラルネットワークと計算力学に基づくシステム同定の検討、第３報、構造物の広範囲欠陥同定法の研究、日本機械学会論文集(C編),65巻635号 (1999-7月)、pp.2771-2778.
(96)栗原雄毅、荒川雅生、萩原一郎、国産普通・小型乗用車の車体軽量化における適用材料の研究（第１報、国産普通・小型乗用車の軽量化進行度の予測手法）、日本機械学会論文集(A編),65巻637号 (1999-9)、pp.1881-1887.
(97)栗原雄毅、荒川雅生、萩原一郎、国産普通・小型乗用車の車体軽量化における適用材料の研究（第２報、包絡解析法による次世代車体への適用材料の研究）、日本機械学会論文集(A編),65巻637号 (1999-9)、pp.1888-1895.
(98)岩波健、施勤忠、萩原一郎、長松昭男、鉄道車両の振動低減に関する研究（応答曲面法による床下機器配置最適化の基礎検討）、日本機械学会論文集(C編)、66巻641号 (2000-1月)、pp.240-246.
(99)施勤忠、萩原一郎、高島太、戸倉直、多峰性最適化解析技術を用いた車体と乗員拘束装置の適合に関する研究、自動車技術会論文集、Vol.31,No.3(2000-7月)、pp.107-113.
(100)Q. Shi and I. Hagiwara,Optimal Design Method Using Holographic NeuralNetwork's Approximation to Automobile Problems,JJIAM(Japan
Journal of Industrial and Applied Mathematics),Vol.17-3(2000),pp.240-247.
(101)Q. Shi,I. Hagiwara and F.Takashima,Global Optimization to MultipleLocal Optima with Response Surface Approximation Methodology, JSMEInternational Journal Series A,Vol.44,No.1(2001),pp.175-184.
(102)I. Hagiwara,Q. Shi,Z. Rao and,D. Wang,Optimal Placement of PiezoelectricActuators to Interior Noise Control,IUTAM Symposium on Smart Structuresand Structronic Systems(2000),U.Gabbert and H.S.Tzou eds., KLUWER ACADEMICPUBLISHERS,pp.247-254.
(103)王杜, 郭中陽, 萩原一郎,ポリトープシステムに関する動的機能と制御の研究(第１報，線形行列不等式によるポリトープ・オブザーバの設計)、日本機械学会論文集（C 編）、67巻663号(2001-11)、pp.3484-3490.
(104)酒井哲也, 岩原光男, 白井裕、萩原一郎、大型車のエンジンマウントの最適設計（第５報、遺伝的アルゴリズムを用いたエンジンレイアウトの最適設計、日本機械学会論文集（C編）、67巻 664号(2001-12)、pp.3815-3822.
(105)施勤忠, 萩原一郎, 蘇翔、ニューラルネットワークと計算力学に基づくシステム同定の検討（第５報、欠陥同定における計測パラメータの選択と最小化）、日本機械学会論文集（C編）、68巻667号(2002-3)、pp754-760.
(106)J.Chen,I. Hagiwara, X.Su, and Q. Shi,A Bispectrum Feature ExtractionEnhanced Structure Damage Detection Approach, JSME International JournalSeries C,Vol.45,No.1(2002),pp.121-126.
(107)H.S.Tzou,J.Ding and,I. Hagiwara, Micro-Control Actions of SegmentedActuator Patches Laminated on Deep Paraboloidal Shells,JSME InternationalJournal Series C,Vol.45,No.1(2002),pp.8-15.
(108)D.Wang,Z.Guo and,I. Hagiwara, Nonlinear Vibration Control by Semi-activePiezo-actuator Damping, JSME International Journal Series C,Vol.45,No.2(2002),pp.442-448.
(109)Nikita Kojekine, Vladimir Savchenko, Michail Senin, Ichiro Hagiwara,Real-time3D Deformations by means of Compactly Supported Radial BasisFunctions,Eurographics'02.
(110)I.Hagiwara,J.Shinoda,The high precise/efficient pre-postrocessor,Journalof Computational and Applied Mathematics 149(2002)325-333.
(111)Nikita Kojekine, Vladimir Savchenko,Ichiro Hagiwara, Software Toolsusing CSRBFs for Processing Scattered Data,Computers and Graphics, ElsevierScience,Vol.27.Issue 2(2003/3),pp.309-317.
(112)萩原一郎、施勤忠、 Zhushi RAO、林海、ウイナーフィルタリング技術による複数入力の最適同定法開発（第１報、実験による確認）、日本機械学会論文集（C編）、68巻672号(2002-8)、pp754-760.
(113)Du Wang, Zhongyang Guo, and Ichiro Hagiwara, Development of the ControlAlgorithm for Suspension System with Air-Springs and Damping
Changeable Shock Absorbers(_)Polytopic Dynamic Modeling and State Observer Design,2001-01-3266 - SAE 2001 Transactions, Vol. 110,
Journal of Passenger Cars: Mechanical Systems, Section 6, pages2522-2527
(114)Tetsuya Sakai, Mitsuo Iwahara, Yutaka Shirai and Ichiro Hagiwara,OptimumEngine Mounting Layout by Genetic
Algorithm,2001-01-2810 - SAE 2001 Transactions, Vol. 110, Journal of Commercial Vehicles, Section 2, pages 496-502.
(115)鎌田慶宣，福島広隆，萩原一郎, 応答曲面法を用いた低周波数域車内音の低減最適化技術, 日本機械学会論文集,第68巻，673号　C編　(2002-9)，pp.2556-2563.
(116)Dmitrii Berzin, Ichiro Hagiwara "Minimal area for surface reconstructionfrom cross sections". International journal of
computergraphics "The Visual Computer", Springer-Verlag, Volume18,Number 7, November 2002,pp. 437-444 ( published online: 23 July 2002).
(117)Nikita Kojekine, Vladimir Savchenko, Michail Senin, Ichiro Hagiwara,"A prototype System for Character Animation Based on Real-time Deformations",The Journal of Three Dimensional Images,Vol. 16, No. 4 (2002/12), pp. 91-95.
(118)Bing-yin Ren, Ichiro Hagiwara. Composite Freeform Surface ReconstructionUsing ecursive Interpolating Subdivision Scheme.
Computers InIndustry, 2003, 50(3): 265-275 (SCI IDS Number: 683KU; EI Accessionnumber: 03217479114)
(119)W.i LI, I. Hagiwara, Takao Yasui and Huawei Chen.A Method of GeneratingScratchedLook Calligraphy Characters Using Mathematical Morphology,Journal 0f Computationaland Applied Mathematics 159(2003),pp.85-90.
(120)I.Hagiwara, D.W.Wang,Q.Z.Shi,R.S.Rao,Reduction of Noise Inside a CavitybyPiezoelectricActuators, ASME Journal of Vibration and
Acoustics,Volume125,No.1(2003-1),pp.12-17.
(121)仲田晋、萩原一郎、リフティングスキームによる四辺形メッシュの多重解像度表現、情報処理学会論文誌、第４４巻第４号(2003/4),pp.1121-1131.
(122)REN,Bingyin,HAGIWARA Ichiro,Composite Freeform Surface ReconstructionUsing Recursive Interpolating Subdivision Scheme,Computers in Industry50(2003),pp.265-275.
(123)L-R Wang,Z-H Lu,I.Hagiwara,Finite element simulation of the staticcharacteristicsof a vehicle rubber mount, Journal of Automobile Engineering(2003-2),pp.
(124)N.Kojkine,I.Hagiwara and V.Savchenko,Software tools using CSRBFs forProcessing Scattered Data,Computers & Graphics (2003),pp.311-319.
(125)Egorova Olga,曲昊直，篠田淳一，萩原一郎，六面体メッシュ生成のための四辺形メッシュ自動生成システムの構築（第１報、アルゴリズムの提案），日本機械学会論文集C編69巻683号(2003/7),pp.1776-1783.
(126)H.S.Tzou,Y.T.Zhu,I.Hagiwara,Distributed precision control of structronicshells and common shapes-Anew approach,Recent Resarch DevelopmetsinSound& Vibration,Vol.1(2002)PartII,Transworld Research Network(2003.7),pp.613-646.
(127)萩原一郎、灘吉聡、折り紙工学を利用した円筒構造物の圧潰解析、自動車技術会論文集Vol.34,No.4(200310),pp.,pp.145-149.
(128) N.Kojekine, M.Senin,V.Savchenko, I.Hagiwara,Particle-based CollisionDetection,EUROGRAPHICS'2003.
(129)Nikita Kojekine, Vladimir Savchenko, Michail Senin, Ichiro Hagiwara,Anapproach to surface retouching and mesh smoothing,Visual Computer(2003)19:1-16.
(130)萩原一郎、山本千尋、陶金、野島武敏、反転らせん型モデルを用いた円筒形折り紙構造の圧潰変形特性の最適化検討、日本機械学会論文集A編70巻689号(2004/1),pp.36-42.
(131)福島広隆，鎌田慶宣，萩原一郎、MPOD法を用いたエンジンマウントの配置最適化、日本機械学会論文集C編70巻689号(2004/1),pp.54-61.
(132)V. Savchenko,M. Savchenko, O. Egorova, I. Hagiwara,Surface SimplificationBased On a Statistical Approach, WSEAS Transactions on
circuits and systems, vol. 3, no. 1,pp.159--164, Jan. 2004.
(133)朱玉田、萩原一郎、毛利泰裕、秋宗淑雄、形状記憶合金の自己感知・過熱防止加熱法、計測自動制御学会論文集、 Vol.40,No.3,（2004-3）、pp.287-292.
(134)カジョキン　ニキタ、谷口由紀、萩原一郎、サブチェンコ　ウラディミール、CSRBF 法による表面修復,情報処理学会論文誌、第４５巻第４号
（2004-4）、pp.1202-1211.
(135)陳華偉，仲田晋，石原冒文，萩原一郎，ハイブリッド記述による固有値解析の並列処理の性能評価，日本計算工学論文集，2004年号，論文番号20040014.６５
(136)程文杰、篠田淳一、萩原一郎、六面体自動生成の原理と双対輪体の自己交差解消方法の提案、日本シミュレーション学会、第２３巻第３号(2004/9),pp.238-246.
(137)I. Semenova, N. Kozhekin, V. Savchenko, I. Hagiwara, A General Frameworkfor Analysis and Comparison of Surface Mesh Optimization Techniques, EngineeringwithComputers.
(138)I. Semenova, V. Savchenko, I. Hagiwara, Optimization of Mesh ElementQuality with Preserving Surface Characteristics, Computer Graphics andGeometry, Scientific Electronic Library, Vol. 6, N.3 .
(139)I. Semenova, V. Savchenko, I. Hagiwara, Curvature Based Mesh Improvement,WSEAS Transactions on Systems, Issue 4, Vol. 3,pp.1346-1354, June 2004.
(140)I. Semenova, I. Hagiwara, Explicit Method to Optimize Surface MeshQuality, WSEAS Transactions on Information Science and Applications, Issue1,Vol. 1, pp. 517-523, July 2004.
(141)古市崇、福島直人、萩原一郎、ランダム路面入力シミュレーションを用いた油圧アクティブサスペンションの最適設計手法、日本機械学会論文集C編71巻701号 (2005/1),pp.152-156.
(142)Li-Rong Wang,Jia-Cai Wang,Ichiro Hagiwara,Modeling Approach of FunctionalModel for Multidomain System,JSME International Journal Series C(2005-3),PP.70-80.
(143)Li-Rong Wang,Jia-Cai Wang,Ichiro Hagiwara,An integrated characteristicsimulation method for hydraulically damped rubber mount of vehicleengine,JournalSound and Vibration,286(2005),673-696.
(144)Huawei CHEN, Ichiro HAGIWARA, Dawei ZHANG, Tian HUANG, Parallel moleculardynamics simulation on thin-film formation process, Journal of crystalgrowth276(2005)281-288.
(145)Huawei CHEN, Ichiro HAGIWARA, Tian HUANG, Dawei ZHANG,TheoreticalStudy on Thin-film Formation by Parallel Molecular Dynamics Simulation,SyntheticMetals 155(2005)652-656. (SCI 1.34).
(146)Cheng Wenjie ,Gonenc Arzu,J.Shinoda and I. Hagiwara.,The maximumopposite angulation for mesh construction,JJIAM,Vol.22,No.1,pp.21-44(2005.2).
(147)Wang LR, Lu ZH, Hagiwara I ,Finite element simulation of the staticcharacteristics of a vehicle rubber mount,JOURNAL OF AUTOMOBILE ENGINEERING,I.Hagiwara,ForewordOn Publication of Special Issue on the Latest Frontiers of CAD/CAE/CG,JSME International Journal Series C,Vol.48,No.2,Special Issue on the LatestFrontiers of CAD/CAE/CG(2005-6),p121.
(148)W.Li,I.Hagiwara,Z.Wu,C1 Smooth Triangular Surface Patch ConstructedbyC-curves,JSME International Journal Series C,Vol.48,No.2,Special Issueon the Latest Frontiers of CAD/CAE/CG(2005-6),PP.244-250.
(149)Bing-Yin REN, Xiao-Dong LI, Zhuo-Qi Wu,Ichiro HAGIWARA,Local SharpFeature Generation and Shape Control of Recursive Subdivision Surface,JSME International Journal Series C, Vol.48,No.2,Special Issue on the LatestFrontiers of CAD/CAE/CG(2005-6),pp.170-175.
(150) Irina SEMENOVA,V.Savchenko.and I. Hagiwara,A New Approach for Improvementof Polyngonal Meshes Representing Surfaces with Sharp
Edges and Boundaries,JSME International Journal Series C,Vol.48,No.2,Special Issueon the Latest Frontiers of CAD/CAE/CG(2005-6),pp.122-129.
(151)M. Savchenko, O. Egorova, I. Hagiwara,V. Savchenko,Hexahedral MeshImprovement Algorithm,JSME International Journal Series C, Vol.48,No.2,SpecialIssue on the Latest Frontiers of CAD/CAE/CG(2005-6),pp.130-136.
(152)M. Savchenko, O. Egorova, I. Hagiwara,V. Savchenko,An Approach toImproving Triangular Surface Mesh,JSME International Journal Series C,Vol.48,No.2,Special Issue on the Latest Frontiers of CAD/CAE/CG(2005-6),pp.137-148.
(153)Frederic.Magoules,Luis A.DIAGO,Ichiro HAGIWARAA, Two-Level IterativeMethod for Image Reconstruction,JSME International Journal Series C, Vol.48,No.2,SpecialIssue on the Latest Frontiers of CAD/CAE/CG(2005-6),pp.170-175.
(154)Luis A.DIAGO,Masaki KITAGOH,Ichiro HAGIWARA,Wavelet Domain Image Reconstructionby Compactly-Supported Radial Basis Functions, JSME International JournalSeries C, Vol.48,No.2, Special Issue on the Latest Frontiersof CAD/CAE/CG(2005-6),pp.170-175.
(155)小金井玲子，安藤成将，施勤忠，萩原一郎、人工衛星打ち上げ時の音響振動解析、日本機械学会論文集C編71巻708号(2005/8),pp.2485-2491.
(156)陳華偉，張大衛，毛利泰裕，萩原一郎，超精密加工用３自由度位置決めステージの開発，精密工学会誌論文集(2005-9),pp.1109-1114.
(157)Irina　Semenova1　, Nikita　Kozhekin1　, Vladimir　Savchenko2and Ichiro　Hagiwara1,　Ageneral framework for analysis and
comparison of surface mesh optimization techniques,Engineering with Computers( 2005)21:91-100.
(158)北郷正輝、Luis Diago、萩原一郎、CSRBF を用いた非可逆画像符号化、画像電子学会、第34巻第6号（2005年11月号/通巻179号）,pp.738-746.
(159)北郷正輝、萩原一郎、解像度変換に適した可逆画像圧縮形式の検討、画像電子学会、第35巻第１号（2006年１月号）,pp.2-9.
(160)北郷正輝、萩原一郎、CSRBFを用いた三次元形状圧縮、画像電子学会、第35巻第２号（2006年1月号),pp10-19..
(161) Li Deng,I.Hagiwara,On a Novel Perturbation Expansion Method for CoupledSystem of Acoustics and Structures,Computers and Mathematics withApplications,special issue, "Distributed Algorithms for Science and Business"
(162) Huawei CHEN, Ichiro HAGIWARA, Tian HUANG, Dawei ZHANG, QuantitativeEvaluation about Property of Thin-film Formation, Applied SurfaceScience 252(2006),pp.3553-3560.
(163) Huawei CHEN, Ichiro HAGIWARA, Dawei ZHANG, Tian HUANG, Parallel moleculardynamics simulation on nanometric grinding, Transaction of JSCES, Vol.7,p.207-213, 2005.
(164)D.Y.Shi, S.C.CHen, Ichiro Hagiwara, Highly nonconforming finite elementappproximations for a fourth order variational inequality with curvatureobstacle, Journal of Systems Science and Complexity,Vol. 18, Nr. 1, pp.136-142
(165)D.Y.Shi, S.C.CHen, Ichiro Hagiwara, Convergence analysis for a nonconformingmembrane element on anisotropic meshes, Journal of Computational Mathematics,Journalof Computational Mathematics,Journal of Computational Mathematics, Vol23,Nr. 4, pp.373-382
(166)Deng Li, C.C.Douglas, Takashi Kako, Suzuki Masabumi, Hagiwara Ichiro,A Novel Perturbation Expasion Method for Coupled System of Acoustics andStructure, Computers & Mathematics with Applications(2006), pp.1689-1704
(167)山崎賢二、萩原一郎, 構造変更時の動特性予測精度向上のための補正付き摂動法の提案, 日本機械学会論文集C編, 72巻720号(2006-8),pp.2492-2499.
(168)Liang Yanxue, Fengyu Cong and Ichiro Hagiwara,Enhanced Frequency BlindSource Separation for Speech Mixture, GESTS(Global Engineering ,Science,and Technology Society) International Transactions on Communication andSignal Processing,Volume 8,Number
1,(2006-8),pp.156-168.
(169)4. Zhuoqi WU, Irina SEMENOVA, Nikita KOZHEKINE, Ichiro HAGIWARA,Developmentof Particle System for Polygonal Mesh, GESTS International Transactionson Computer Science and Engineering, Vol.33, No.1 (2006.8.31)
(170) 陳華偉、萩原一郎, 多様な傷を有するデジタル画像のトータル修復技術の開発、日本機械学会論文集, 073巻729号C編(2007-5),pp.1291-1298.
(171) M. Savchenko, O. Egorova, I. Hagiwara, V. Savchenko, “Different Approachesfor Surface Mesh Modification”, GESTS International Transaction on ComputerScience and Engineering, Vol.33, No. 1, 2006, pp. 1-10.
(172)M. Savchenko, O. Egorova, I. Hagiwara, V. Savchenko, “Quality Improvementof Tetrahedral Meshes “, GESTS International Transaction on
Computer Science and Engineering, Vol.33, No. 1, 2006, pp. 83-93.
(173)Huawei CHEN, Dawei ZHANG, Ichiro HAGIWARA, Diagnosis of Motion Errorsof the Rotary Axes in 5-axis Machining Center (1st report) --The Procedurefor Diagnosis of Angular Error Sources--, Journal of CJME, Vol.19,pp.276-281,2006.
(174)Liang Yanxue, Fengyu Cong and Ichiro Hagiwara, Multistage Blind SourceSeparation and Deconvolution for Convolutive Mixture of Speech Signals,International Journal of Computational Intelligence Research,Vol.3,No.1(2007),pp.37-42.
(175)福島直人、萩原一郎, エネルギ収支に着目した新しい最適制御理論の構築とその適用、応用数理、Vol.17, No. 2,2007－6月, pp. 42-58.
N.Fukushima,I.Hagiwara,Proposition of a new optimum theory based on energy equation and its application,Bulletin of the Japan Society for Industrial and Applied mathematics, Vol.17, No. 2, (2007-6), pp. 42-58.
(176)M. Savchenko, O. Egorova, I. Hagiwara, V. Savchenko, “Techniquesfor Improving the Quality of Tetrahedral Meshes”, 自動車技術会論文集,Vol.38,No.2(2007-3),pp.299-306.
(177)O. Egorova, M. Savchenko, I. Hagiwara, and V. Savchenko, “Modelingof Quality Parameter Values for Improving Meshes”, Japan Journal of Industrialand Applied Mathematics (JJIAM), vol. 24, (2),2007,pp.181-195.
(178)Z. Wu, I. Hagiwara and X. Tao, Optimisation of crush characteristicsof the cylindrical origami structure, Int. J. Vehicle Design, Vol.43, Nos.1-4(2007),pp66-81.
(179)V. Ryzhii, M. Ryzhii, Y. Hu, I. Hagiwara, and M. S. Shur,"Resonantdetection of modulated terahertz radiation in micromachined high-electronmobility transistor",Appl. Phys.Letters,Vol.90,No.20(2007-5),pp.203503-1-203503-3.
(180)Frederic Magoules,Luis A.Diago,Ichiro HAGIWARA,Preconditioning forimage reconstruction with radial basis functions,Advances in EngineeringSoftware 38(2007),pp.320-327.
(181) Aized, T., Takahashi, K. and Hagiwara, I. “Advanced Multiple-productFMS modelling with resource breakdown and automated inspection using coloredPetri Net” accepted for Journal of Advanced Computational Intelligenceand Intelligent Informatics (JACIII),Japan. This paper will appear in JACIIIVol. 11 No. 6 to be published in July, 2007.and Systems Engineering.
(182)Aized, T., Takahashi, K. and Hagiwara, I. “The impact of guide pathconfigurations on performance of an integrated automated guided vehiclesystem using coloured Petri net” accepted and scheduled for Vol. 1, No.1, 2007, International Journal of Automation Technology,Japan (IJAT).
(183)Aized, T., Takahashi, K. and Hagiwara, I. “Colored Petri netbasedmodeling of multiple product FMS with resource breakdowns and automatedinspection” conditionally accepted and under final review,IEICE Transactionson Fundamentals of Electronics, Communications and Computer Science, Japan.
(184) 山崎賢二、萩原一郎, 構造変更時の動特性予測精度向上のための補正付き摂動法の提案（第2報，実用モデルへの適用）、日本機械学会論文集,073巻731号C編(2007-5),pp.1940-1947.
(185)Aized, T., Takahashi, K. and Hagiwara, I. “Modeling and optimizationof an Integrated Automated Guided Vehicle System using colored Petri netand response surface methods.” under review, IEICE Transactions on Fundamentalsof Electronics, Communications and Computer Science, Japan.
(186)Aiized, T., Takahashi, K. and Hagiwara, I, “ Resource breakdown modelingand analysis of multiple product flexible manufacturing system using colouredPetri net” under review, European Journal of Industrial Engineering
(187)H.W. Chen, I. Hagiwara, A.K. Tieu, , Theoretical investigationabout secondary deposition of thin film formation by molecular dynamicssimulation, Journal of Crystal Growth, Vol.303 No.2, pp. 530-536, 2007(May).
(188)Huawei CHEN, I.Hagiwara, et. al., Molecular Dynamics Simulation about Porous Thin-film Growth in Secondary Deposition, Applied Surface Science,Vol.253 No.18, pp.7471-7477, 2007 (July).
(189).W. Chen, I. Hagiwara, Image Reconstruction Based on Combination ofWavelet Decomposition, Inpainting and Texture Synthesis, accepted by IJIG.
(190)V.Savchenko, M. Savchenko, O. Egorova, I. Hagiwara, “Mesh QualityImprovement: Radial Basis Functions Approach”, Advances in EngineeringSoftware, Journal, 2007.
(191) L-R Wang,J-C Wang,Z-H Lu,Ichiro Hagiwara,Finite element-based parameterestimations for a characteristic simulation model of a hydraulically dampedrubber mount for vehicle engines,October 2007,Proceedings of the Institutionof Mechanical Engineers Part D Journal of Automobile Engineering 221(10):1273-1286,DOI:10.1243/09544070JAUTO153
(192) Yabo Hu, Maxim Ryzhii, Ichiro Hagiwara, Michael S. Shur, andVictor Ryzhii, “Combined resonance and resonant detection of modulatedterahertz radiation in a micromachined high-electron mobility transistor”, Phys.Stat. Sol. (c) 5, No. 1, pp.277~281 (2008).
(193)Y. Hu, I. Hagiwara, I. Khmyrova, M. Ryzhii, V. Ryzhii, M. S. Shur,“Plasma effects in a micromachined floating-gate high-electron-mobilitytransistor”, Jpn.J.Appl. Phys. (2008).
(194) L.-R. Wang, J.-C. Wang, and I. Hagiwara. Investigation to Peer-to-Peerbased Collaborative Working Platform for Product Development. Acceptedby International Journal of Internet Manufacturing and Services. Vol. 1,No. 2,2008, pp. 194-212 .
(195)寺根哲平、萩原一郎、補正付き摂動法の高効率化に関する研究、日本機械学会論文集（C編）Vol.74巻739号（2008-3）,pp.542-547.
(196)Kenji YAMAZAKI and Ichiro HAGIWARA,Proposal of New Perturbation Methodwith Complementary Term for Dynamic
Characteristics Prediction of Modified Structure ,Journal of Computational Science and Technology,Vol. 2 (2008) No. 1 pp.173-184
(197)I.Hagiwara,J.Shinoda, Reverse engineering based on computer graphicstechnique,the 28th volume of Gakuto International series, MathematicalSciences andApplications,pp.53-62(2008-8).
(198) L.Diago, T.Kitaoka,I.Hagiwara,Development of a System for AutomaticFacial Expression Analysis, Journal of Computational Science and
Technology,Vol.2, No.4(2008-8),pp.401-412.
(199) T.Kitaoka,L.Diago,S.Kitazaki,I.Hagiwara,S.Yamane,Definition,Detectionand Generation of Iyashi Expression, Journal of Computational Science andTechnology, Vol.2, No.4(2008-8), pp.413-422.
(200)Aized, T., Takahashi, K., Hagiwara, I and Morimura, H.“Resource breakdownmodelling and performance maximization of a multiple product flexible manufacturingsystem” accepted and scheduled for Vol. 3 No. 4, 2008, International Journalof Industrial
(201)戸倉直、萩原一郎、トラスコアパネルの製造シミュレーション、日本機械学会論文集（A編）Vol.74巻746号（2008-10）,pp.1379-1385.
(202)斉藤一哉、野島武敏、萩原一郎、新しく開発した軽量コアパネルの幾何学的パターンと機械的特性の関係、日本機械学会論文集A編 Vol.74巻748号（2008-12）,pp.1580-1586.
(203)Ahmed DesokiJun-ichi Takada,and Ichiro Hagiwara, Efficient array designalgorithm for wide-band application of theMUltiple SIgnal Classificationalgorithm,Acoustical Science and Technology,Vol.30,No.3(2009-5月),pp.187-198.
(204)Fukushima N., Arslan, M. S. and Hagiwara I., An Optimal Control Methodbased on the Energy Flow Equation, IEEE Transactions on Control SystemsTechnology, Vol.17, No.4, 2009,pp.866-875.
(205)M. S. Arslan, N. Fukushima and I. Hagiwara, Optimal Control of UnderactuatedUnder water Vehicles with Single Actuator, Intelligent
Underwater Vehicles, ITECH, pp.19-32 (2009-1).
(206)斉藤一哉，野島武敏，森村浩明、萩原一郎，新しく開発した軽量コアパネルの曲げ剛性の評価」日本機械学会論文集A編75巻750号（2009-2）,pp.259-265.
(207) O.Egorova , M.Savchenko, V.Savchenko , I.Hagiwara, Topology and Geometryof Hexahedral Complex: Combined Approach for Hexahedral Meshing,Journalof Computational Science and Technology, Vol. 3 (2009) , No.1,pp.171-182(2009-2).
(208) M.Savchenko,O.Egorova, I.Hagiwara, V.Savchenko , Tetrahedral MeshReduction Technique, Journal of Computational Science and Technology, Vol.3, No.1,pp.183-195(2009-2).
(209)H.W. Chen, I. Hagiwara, Novel Precision PZT-driven MicropositioningStage with Large Travel Range, Key Engineering
Materials,Vol.407-408,pp.159-162(2009-2).
(210) G. Cen, N. Matsuhira, J. Hirokawa, H. Ogawa,I. Hagiwara, “ImprovedParticle Filter for Service Robot Self-Localization,” the Society of
Instrument and Control Engineers (SICE) Journal of Control, Measurement and System Integration.、Vol.2 No.1 (January, 2009),pp.56-63.
(211)L.-R. Wang, J.-C. Wang, Z.-H. LU and I. Hagiwara. Investigation intoFluid-structure Interaction of Hydraulically Damped Rubber Mount on thebasis of Finite Element Analysis. Proceedings of the I MECH Part D, Journalof Automobile Engineering, 2009, 223 (D3), 327-342.
(212) Guanghui Cen, Nobuto Matsuhira, Junko Hirokawa, Hideki Ogawa andIchiro Hagiwara, “New Entropy-Based Adaptive Particle Filter for MobileRobot Localization, Advanced Robotics 23 (2009) 1761-1778
(213) Benjamin Faucard, A. Gonenc Sorguc F.Magoules and I. Hagiwara,Refiningtechnique for multilevel graph k-partitioning and its application on domaindecomposition non overlapping Schwarz technique for urban acoustic pollution,Transactionof the Japan Society for Simulation Technology.,Vol.1,No.2,pp.17-27.(2009-6).
(214) 斉藤一哉，武田晃太．戸倉直，萩原一郎，新しく開発した軽量コアパネルの幾何学的パターンと成型性の関係」、日本機械学会論文集A編75巻751号（2009-3）,pp.381-387.
(215) HUAWEI CHEN; ICHIRO HAGIWARA; A. KIET TIEU, Image ReconstructionBased on Combination of Wavelet Decomposition, Inpainting AND Texture Synthesis,InternationalJournal of Image and Graphics (IJIG), Volume: 9,Issue: 1 (January2009),pp.51 - 65.
(216)戸倉直、萩原一郎、成形シミュレーションで得られる加工硬化を考慮したトラスコアパネルの曲げ剛性の検討、日本機械学会論文集A編、 075巻753号A編（2009-5）,pp.588-594.
(217) 北岡哲子、田中兼一、北崎智之、萩原一郎、癒し構造分析とグッズの分析・評価への応用：日本感性工学会論誌，Vol.9,No.1,pp.43-49(2009).
(218)T. Kitaoka,L.Diago,I. Hagiwara,S.Kitazaki,Development of Facial ExpressionAnalysis by Fuzzy Quantification Theory Ⅱ―Comparison with Holographic NeuralNetworks―　 GESTS International Transactions on Computer Science and Engineering、Vol.55,No.1(2009.8),pp.97-108.
(219)Jiacai Wang, Ichiro Hagiwara. Design and implementation of photogrammetrybased product re-realization. WSEAS Transactions on Information Scienceand Applications, Volume 6 , Issue 8 (August 2009)
(220)Ahmed DesokiJun-ichi Takada,and Ichiro Hagiwara, Improved finite samplesresampling for unbiased wide-band direction of arrival
estimation.,Acoustical Science and Technology,Vol.30,No.6, (2009-11),417-428.
(221)H.W. CHEN, I. Hagiwara,　D.H. Jiang， Development of Novel XY,MicropositioningStage, Key Engineering Materials, Vol.408-409:103-106,2009.
(222)H.W. CHEN, I. Hagiwara, Novel Precision PZT-driven MicropositioningStage with Large Travel Range, Key Engineering Materials,Vol.408-409:159-162,2009.
(223) Jiping Li,Gang Tong, Dianbo Shi,Meng Geng,Huawei Zhu,Ichiro Hagiwara,Automaticsmall feature recognition and suppression from B-rep models for analysis,Engineering with Computers,Volume 25, Issue 3 (2009), Page.279-285.
(224）Arzu Gonenc Sorguc,Ichiro Hagiwara,and Semra Arslan Selcuk, OrigamicsIn Architecture:A Medium Of Inquiry For Design In Architecture, MiddleEast Technical University, Journal Of The Faculty Of Architecture, Vol.26,No.2,pp.235-247, (2009-12)
(225)趙希禄、胡亜波、萩原一郎、折紙工学を利用した円筒薄肉構造物の衝突圧潰特性の最適設計、日本機械学会論文集A編、76巻761号（2010-１）,pp.10-17.
(226)内田博志、福島直人、萩原一郎、エネルギー最適制御理論に基づくハイブリッド電気自動車のエネルギーフロー制御、自動車技術会論文集Vol．41，No．2（2010年3月）,pp.461-468.
(227) 望月隆史、萩原一郎、モーダル差分構造法と従来手法の比較、日本機械学会論文集076巻753号C編（2010-3）,pp.525-532.
(228）S. Tokura and I.Hagiwara Forming Process Simulation of Truss Core Panel,Journal of Computational Science and Technology ,Vol. 4 (2010) , No.1,pp.25-35 (Release Date: March 30, 2010)
(229)S. Tokura, I. Hagiwara, A Study for the Influence of Work Hardeningon Bending Stiffness of Truss Core Panel, J. Appl. Mech.,Vol.77/031010-1-031010-6(2010-5).
(230)戸倉　直，萩原一郎，トラスコアパネルの衝撃エネルギー吸収性能向上のための形状最適化，日本機械学会論文集（A編）、76巻765号（2010-5）pp.564-572.
(231)田中　聡，斎藤　一哉，森村浩明，萩原　一郎、トラスコアパネルの振動特性に関する研究、日本機械学会論文集C編、76巻765号（2010-5,pp.1050-1055.
(232)森村浩明、濃沼義典、アハメド・デソキ、萩原一郎、包装機械における成形型の設計の検証、、日本機械学会論文集C編、76巻765号（2010-5）,pp.1316-1322.
(233)趙希禄、胡亜波、萩原一郎、衝突方向のばらつきを考慮した半割り型自動車サイドメンバーの圧潰エネルギー吸収性能のロバスト最適化、日本機械学会論文集A編、76巻767号（2010-7）,pp.868-875.
(234) Li-Rong Wang,Zhen-Hua Lu,Ichiro Hagiwara, Analytical analysis approachto nonlinear dynamic characteristics of hydraulically damped rubber mountfor vehicle engine, Nonlinear Dynamics 61(1):251-264 (July 2010) DOI: 10.1007/s11071-009-9646-1
(235)望月隆史、萩原一郎、モーダル差分構造法とGuyanの静縮約による区分モード合成法の一般化、日本機械学会論文集076巻768号C編,（2010-8）,pp.2024-2031.
(236) Zixian Zhang, Maria Savchenko, Ichiro Hagiwara*1 and Bingyin Ren,3-AxisNC Tool Path Generation and Machining Simulation for Subdivision Surfaceof Complex Models, International Journal of CAD/CAM Vol. 10, No. 1,pp.1-9 (2010).
(237)趙希禄、胡亜波、萩原一郎、折紙工学援用による半割り型自動車サイドメンバーの圧潰エネルギー吸収性能に関する研究、日本機械学会論文集A編、76巻767号（2010-9）,pp.1131-1138.
(238)内田博志、福島直人、萩原一郎、エネルギー最適制御理論に基づくハイブリッド電気自動車のエネルギーフロー制御（第２報）、自動車技術会論文集Vol．41，No．5（2010-9）,pp.1127-1132.
(239)徐　放，趙希禄，萩原一郎、リバースエンジニアリングにおける自動位置合せに関する検討、日本機械学会論文集076巻771号C編（2010-11）,pp.2861-2869.
(240)熊谷尚孝、安藤成将、施　勤忠、土橋将弘、森村浩明、萩原一郎、音響フィルエフェクト負荷時の宇宙機振動応答に関する簡易計算法、日本機械学会論文集076巻771号C編（2010-11）,pp.2870-2875.
(241) Jiping Li,Gang Tong, Jianjun Peng, Huawei Zhu,Jiang Du,Ichiro Hagiwara,Automatic small depression feature recognition from B-rep modelsfor meshing, Journal of Computational and Applied Mathematics,V (2010-8),Page1-5.
(242)H. Sahin, N. Fukushima, T. Mochizuki, I. Hagiwara,Hardware-in-the-LoopSimulation Evaluation of a Novel Hybrid Type LinearActuator for Self PoweredActive Suspension Systems,自動車技術会論文集,vol.41,No.6(2010-11),pp.1211-1218.
(243)Ahmed Desoki,Hiroaki Morimura1 and Ichiro Hagiwara, General Designof the Forming Collar of the Vertical Form, Fill and Seal Packaging MachineUsing the Finite Element Method, PACKAGING TECHNOLOGY AND SCIENCE Packag.Technol.Sci. (2010),pp.1-17.
(244) L. R. Wang,Z. H. Lu,Ichiro Hagiwara,Integration of experiment andhydrostatic fluid-structure finite element analysis into dynamic characteristicprediction of a hydraulically damped rubber mount, International Journalof Automotive Technology 11(2):245-255(April2010),DOI:10.1007/s12239-010-0031-3.
(245) Li-Rong Wang, Zhen-Hua Lu, Ichiro Hagiwara ,Analytical analysis approachto nonlinear dynamic characteristics of hydraulically damped rubber mountfor vehicle engine, Nonlinear Dynamics 61(1):251-264, DOI: 10.1007/s11071-009-9646-1(2010-7).
(246)Wei Wei, Yixiong Feng, Jianrong Tan and Ichiro Hagiwara, FlexibleJob Shop Sceduling Multi-objective Optimization Based on Improved StrengthPareto Evolutionary Algorithm, Advanced Materials Research ,Vol.186,(2011),pp.546-551
(247)Sunao Tokura and Ichiro Hagiwara,Shape Optimization to Improve ImpactEnergy Absorption Ability of Truss Core Panel,Journal of ComputationalScience and Technology,Vol.5,No.1,(2011-1),pp.1-12.
(248)Xilu Zhao, Yabo Hu and Ichiro Hagiwara,Study on Crach Characteristicsof Half Cut Type Vehicle Side Member Structure of Energy Absorption Abilityby Using Origami Engineering, Journal of Computational Science and
Technology,Vo.5,No.1,(2011-1),pp.13-25.
(249)Zixian Zhang, Ichiro Hagiwara, Maria Savchenko, Yixiong Feng, JunichiShinoda, A Novel Tetrahedral Mesh Generation Algorithm for Finite ElementAnalysis, Advanced Materials Research,Vols.189-193 (2011), pp.545-548
(250)張 子賢, サブチェンコ マリヤ, Yixiong Feng, 福久 龍哉, 篠田 淳一, 萩原一郎, “三角形メッシュを基に自動的なセグメンテーション手法”, Transactions of JSCES, Vol. 2011, 20110001, (2011) .
(251) Zixian Zhang,Bingyin Ren,Yixiong Feng, and Ichiro Hagiwara,NumericalControl Tool-Path Generation Subdivision Surface Using Toroidal Cutteron 5-Axis Machine Tool, American Scientific Publishers,Vol.4,1-6,(2011),pp.1-6
(252)Gang Tong, Maria Savchenko and Ichiro Hagiwara, Polygonal mesh Partitioningfor NURBS surface generation, Advanced Materials Research Vols.204-210(2011),pp.1824-1829
(253)望月 隆史, 萩原 一郎 、モーダル差分構造法における特異性に関する考察、日本機械学会論文集Ｃ編Vol. 77 (2011) , No.774,（2011-2）,pp. 246-256.
(254)L.Rodriguez,l.Diago,I.Hagiwara,Interactive Genetic Algorithm withfitness modeling for the development of a color simulation system basedon customer's preference,JJIAM Special Issue,Volume28,Number1,(2011),pp.16-27
(255)H.Chen,I.Hagiwara,A.K.Tieu,A Seamless coupling between molecular dynamicsand material point method,JJIAM Special Issue,Volume28,Number1,(2011),pp.44-55
(256)L.A.Diago,T.Kitaoka,I.Hagiwara,Analyzing facial expressions with fuzzyquantification theory Ⅱ:indefinite generalized eigenvalue problem,JJIAMSpecial Issue,Volume28,Number1,(2011),pp.142-153
(257)T.Mochizuki,I.Hagiwara,A Comparison between Modal Differential Sub-structureMethod and Conventional Component Modal Synthesis Methods, Journal of SystemDesign and Dynamics, Vol5, No.2 (2011)pp.320-331.
(258)Ladys Rodriguez,Luis Diago,Ichiro Hagiwara,Improved Exemplar-BasedImage Inpainting with Reduced Search Space Computation from Image WaveletDecomposition,画像電子学会会誌,Vol.40,No.3(2011)pp.428-438.
(259)Maria Savchenko, Luis Diago, Vladimir Savchenko,Olga Egorova and IchiroHagiwara, Mesh Segmentation Using the Platonic Solids, 日本シミュレーション学会論文誌,Vol3,No.1,(2011-3),pp.1-10
(260)Zheng Gong, Luis Diago, Ichiro Hagiwara, "Single Image BasedRepainting System", Journal of Information and Computational Science,2010 Vol. 7 (11) : 2288- 2295
(261)Zheng Gong, Luis Diago, Ichiro Hagiwara, "An Intelligent Systemfor Texture Replacement", Journal of Information and ComputationalScience, 2010 Vol. 7 (12) : 2564- 2571.
(262)趙 希禄, 寺根 哲平, 申 鉉眞, 萩原 一郎、補正付き摂動法を用いた構造振動特性の高効率応答曲面法最適化 、日本機械学会論文集Ｃ編Vol.77, No. 776, （2011-4）pp. 246-256.
(263)Xilu ZHAO, Yabo HU and Ichiro HAGIWARA, Shape Optimization to ImproveEnergy Absorption Ability of Cylindrical Thin-Walled Origami Structure,Journal of Computational Science and Technology,pp. 148-162, Release Date:November 30, 2011.
(264)Zhi Zhen Xia, Xilu Zhao and Ichiro Hagiwara. A Simulation Approachto Improve Forming Limitation of Truss Core Panel, Applied Mechanics andMaterials, Vols.121-126, pp.2471-2475. (Oct,2011)
(265). Bo Yu, Zixian Zhang, Yixiong Feng, Luis Ariel Diago,Ichiro Hagiwara,Cooperation design system based on Mobile-C agent platform, Advanced EngineeringForum, Volume 1(2011), pp.16-20.
(266) 福島直人、萩原一郎、エネルギー最適制御理論―最適制御理論の新しい枠組みとその発展性について、応用数理、Vol.21,No.4(2011-12),pp.259-275
(267)上林俊樹、Luis A. Diago、北岡哲子、萩原一郎、顔画像中の影に対する補正法の検討、画像電子学会、第41巻第1号（2012年１月号）,pp.28-35.
(268)Bo Yu, Luis A. Diago, Maria Savchenko, and Ichiro Hagiwara, Line- based region growing image segmentation for mobile device applications,TheJournal of the Institute of Image Electronics Engineers of Japan, (Chapter3)第41巻第1号（2012年１月号）,pp.73-83.
(269)Luis Diago, Tetsuko Kitaoka, Ichiro Hagiwara and Toshiki Kambayashi,Neuro-fuzzy quantification of personal perceptions of facial images based ona limited data set, IEEE Transactions on Neural NetworksVol.22,No.12(2011-12),pp.2422-2434.
(270) Zheng Gong, Luis Diago, Ichiro Hagiwara, CUDA accelerated simulationof multiple scattering using decoupling approximation, Journal of Visualization,15(1): 85-95 (2012).
(271) 徐放，趙希禄，萩原一郎，“多記述子点群モデルによる高速自動位置合わせに関する研究”, 日本機械学会論文集Ｃ編 Vol. 78 (2012), No. 787,pp. 783-798
(272) 西山 浩司，井上亜友子，今田大介，長谷陽夫，戸倉直、篠田淳，趙希禄，大島修造，萩原一郎、玉軸受の攪拌抵抗解析のための動解析, 日本機械学会論文集C編, 第78巻第789号(2012-5),pp.1663-1669
(273)森村浩明、寺島佳希、萩原 一郎、包装機によってフィルムを成形する時に発生する応力解析, 日本機械学会論文集C編, 第78巻第789号(2012-5),pp.1802-1810
(274)Ladys Rodriguez, Luis Diago and Ichiro Hagiwara. Interactive imagesegmentation through image polygonal representation. 画像電子学会誌第41号第3号(2012-6),pp.223-234
(275)Xilu ZHAO, Teppei TERANE, Hyunjin SHIN, Ichiro HAGIWARA, High Efficiencyof Optimization of Response Surface Method for Structure Dynamic Characteristicsby Using Perturbation Method with Complementary Term,Journal of SystemDesign and Dynamics Vol. 6(2012) No. 2,pp.158-169.
(276)石田祥子，野島武敏，亀井岳行，萩原一郎、等角写像とその円錐殻折紙構造物設計へ
の応用、日本応用数理学会論文集22巻４号(2012年12月),pp.301-318
(277)Huawei Chen,Fugang Rao,Xiaopeng Shang, Deyuan Zhang,Ichiro Hagiwara,Biomimetic Drag Reduction Study on Herringbone Riblets of Bird Feather,Journal of Bionic Engineering(July 2013).10(3):341–349,DOI: 10.1016/S1672-6529(13)60229-2
(278)Eri Nakayama, Sachiko Ishida, Liao Yujing, Ichiro Hagiwara, Clothing skirtdesigned on conical truss model, Advances in Manufacturing,Vol.1, No.2(2013),Page130-135.
(279)石田祥子、野島武敏、萩原一郎、等角写像の折紙への応用（巻き取り可能な円形膜作成法）、日本機械学会論文集C編, 第78巻第789号(2013-5),pp.1561-1569.
(280)Hilman Nordin, Mohd Hamdi, Yang Yang, and Ichiro Hagiwara, Investigationon Spot Welding Effect on Truss Core Panel for Crashworthiness Periodicalof Materials Science Forum Vols. 773-774(2014) pp 774-783
(281)石田祥子，野島武敏，萩原一郎、湾曲した筒の折り畳みモデル化，日本機械学会論文誌(C編)，Vol. 79, No. 808, pp.5117-5127 (2013)
(282)Huawei Chen, Fugang Rao, Xiaopeng Shang,Deyuan Zhang,Ichiro Hagiwara,Flow over bio-inspired 3D herringbone wall riblets,
Experiments in Fluids 55(3),DOI: 10.1007/s00348-014-1698-4 February 2014
(283)石田祥子，野島武敏，萩原一郎、等角写像変換を利用した折り畳み可能な湾曲した筒型構造設計法、日本応用数理学会論文集24巻1号(2014年３月),pp.43-58.
(284)石田 祥子, 森村 浩明, 五島 庸, 萩原 一郎、有限要素法による新しい透過損失算出手法 、日本機械学会論文集 Vol. 80(2014)No. 813,pp.1-15.
(285)Sachiko Ishida, Taketoshi Nojima, Ichiro Hagiwara, Mathematical approachto model foldable conical structures using conformal mapping,Transactionsof ASME, Journal of Mechanical Design, Vol. 136, No. 9, Paper No. 091007,2014年6月発表.
(286)楊 陽, 趙 希禄, 戸倉 直, 萩原 一郎、トラスコアパネルからなる軽量化構造の衝突エネルギー吸収性能向上,日本機械学会論文集 Vol.80(2014) No. 815、pp.1-14、公開日: 2014年07月25日
(287)グエン ・タイ・タット・ホアン, 寺田 耕輔, 戸倉 直, 萩原 一郎、トラスコアの設計自由度を高めるための折紙工法の開発、日本機械学会論文集、Vol.80,No.819,2014年11月25日(火）,pp.1-10.
(288)石田 祥子, 内田 博志, 萩原 一郎、折り畳み可能な構造の非線形ばね特性を利用した防振機構、日本機械学会論文集Vol.80, No.820,2014,pp.1-11.公開日：2014年12月25日(木).
(289)Lu Yang,Luis Diago,Ichiro Hagiwara, Real-Time 3D Reconstruction ofWood Logs in a Production Line, Recent Patents on Computer Science 8(1):49-57DOI: 10.2174/2213275907666141010213619 May 2015.
(290)S, Ishida, T, Nojima, I. Hagiwara, Design of Deployable MembranesUsing Conformal Mapping, J. Mech. Des. 137(6), 061404 (Jun 01, 2015) (6pages)Paper No: MD-14-1395; doi: 10.1115/1.4030296
(291)寺田 耕輔、戸倉 直、佐藤 秀俊、牧田 哲暢、萩原 一郎、組立式軽量高剛性構造パネルパネルパネルの曲げ剛性評価、日本機械学会論文集Vol.81, No.8284,pp.1-15.公開日：2015年8月25日.
(292)S.Ishida, T. Nojima and I. Hagiwara, Design of Deployable Membranes Using Conformal Mapping, Journal of Mechanical Design, Volume 137,061404-1～061404-6 (June, 2015)
(293)Sachiko Ishida, Taketoshi Nojima and Ichiro Hagiwara, Regular Folding Pattern for Deployable Non axisymmetric Tubes,Journal of Mechanical Design, Volume 137,091402 (Jul 28, 2015)
(294)中山江利，グエン　タイ　タット　ホアン，戸倉直，萩原一郎，折紙構造の津波ポッドの最適設計のためのモデリングとシミュレーション，日本機械学会論文集Vol.81,No.829,p. 15-00268( 2015/09/25)
(295)Y. Lu, L. A. Diago, and I. Hagiwara, "Real-Time 3D Reconstruction ofWood Logs in a Production Line", Recent Patents on Computer Science2015, 8, 49-57
(296) L. A. Diago, J. Romero, J. Shinoda and I. Hagiwara, " Analysis Kansei from Facial Expressions by CSRBF Mapping ", Journal of Mechanics Engineering and Automation, Vol. 5 No. 7 (2015) 420-426
(297)Y. Yang, X. Zhao, S. Tokura ,I. Hagiwara, A study on crash energyabsorption ability of lightweight structure by using truss core panel,Origami 6,pp.397-408.
(298)S. Ishida, H. Morimura ,I. Hagiwara, Sound Insulating Performance Of Origami-BasedSandwich Truss core panels, Origami 6, PP.431-438.
(299)Hoan Thai Tat Nguyen, Phuong Thao Thai, Bo Yu and Ichiro Hagiwara, Development of a Manufacturing Method for Truss Core Panels Based on Origami-forming, J. Mechanisms Robotics (), (Dec 09, 2015),doi:10.1115/1.4032208
(300) Julian ROMERO, Luis DIAGO, Junichi SHINODA, Ichiro HAGIWARA, Comparison of Data Reduction Methods for the Analysis of Iyashi Expressions using Brain Signals, Journal of Advanced Simulation in Science and Engineering, Vol. 2 (2015) No. 2 p. 349-366.
(301) Eri NAKAYAMA, Takamichi SUSHIDA and Ichiro HAGIWARA, MathematicalModeling and Simulation for Origami Tsunami Pod, Josai Mathematical Monographsvol.9 (2016), pp. 3-19
(302)萩原一郎、「折紙工学の深化と新しい潮流」にあたって、応用数理招待論文、Vol.26,No.1(2016-3),pp.5-8.
(303)石田祥子、萩原一郎、等角写像による折紙デザイン手法、応用数理招待論文、Vol.26,No.1(2016-3),pp.15-21.
(304) 萩原一郎、積層型３次元プリンターを凌駕する折紙式３次元プリンターを目指して、応用数理招待論文、Vol.26,No.1(2016-3),pp.22-28.
(305)Eri NAKAYAMA, Ichiro HAGIWARA, Modeling and Simulation of TsunamiPod, Information Technology in Industry,Vol.3, No.3(2015-12).
(306)寺田耕輔、佐藤秀敏、牧田哲暢、高橋徹、萩原一郎、組立式トラスコアパネルの開発、福島工業高等専門学校研究紀要第55号(2014),pp.1-5.
(307)寺田耕輔、門井幸大。戸倉直、須子田隆道、萩原一郎、折り畳み可能な構造体の変形メカニズム、福島工業高等専門学校研究紀要第56号(2015),pp.16.
(308)寺田 耕輔，戸倉 直，佐藤 秀俊，牧田 哲暢，萩原 一郎, 組立式軽量高剛性構造パネルの曲げ剛性評価, 日本機械学会論文集 Vol.81, No.828 (2015),pp.1-15.
(309)Y. Yang, X. Zhao, S. Tokura ,I. Hagiwara, A study on crash energyabsorption ability of lightweight structure by using truss core panel,Origami 6(2016－1),pp.397-408.
(310)S. Ishida, H. Morimura, I. Hagiwara ,Sound-Insulating Performance of Origami-based Sandwich Trusscore Panels,Origami 6(2016－1),pp.431-438
(311) Yu,B., Savchenko,M.,Shinoda,J.,Diago,L.,Hagiwara,I. and Savchenko,V., Producing Physical Copies of the Digital Models via Generating 2D Patterns for“Origami 3D Printer” system,pp.58-77,J. ADV. SIMULAT. SCI. ENG. Vol. 3, No. 1(2016),pp.58-77.

             DOI https://doi.org/10.15748/jasse.3.58
(312)Phuong Thao THAI, Maria SAVCHENKO, Hoan Thai Tat NGUYEN, Ichiro HAGIWARA,Simulation-based approach for paper folding with the aim to design theorigami-performing robotic system ,Released: December 15, 2016 [AdvancePublication] Released: October 19, 2016
(313)楊 陽, 奈良 知惠, 萩原 一郎, 二枚貼り折紙構造のエネルギー吸収特性,日本機械学会論文集 Vol. 83(2017) No. 845 公開日: 2017年01月25日,早期公開日: 2016年12月20日[DOI: 10.1299/transjsme.16-00486],pp.1-13.
(314) 寺田耕輔、戸倉直、高橋徹、萩原一郎、組立式トラスコアパネル(ATCP)の実用化開発、福島工業高等専門学校研究紀要第58号(2017),pp.1-8.
(315)Kousuke Terada, Kota Kadoi, Sunao Tokura, Takamichi Sushida and Ichiro Hagiwara, The deformation mechanism on origami-based foldable structures,Int. J. Vehicle Performance, Vol. 3, No. 4, 2017,pp.334-346.
(316)Chenghai Kong, Xilu Zhao,Ichiro Hagiwara, Hydroforming process of manufacturing for reverse spiral origami structure, Int.J. Vehicle Performance, Vol. 3, No. 4, 2017,pp.347-364.
(317)Yang Yang, Sachiko Ishida, Xilu Zhao, Ichiro Hagiwara, Vehicle energy absorbers consisting of foldable cylinders using response surface methodology, Int. J. Vehicle Performance, Vol. 3, No.4, 2017,pp.380-394.
(318) Sachiko Ishida, Hiroshi Uchida, Haruo Shimosaka and Ichiro Hagiwara,Design and Numerical Analysis of Vibration Isolators With Quasi-Zero-StiffnessCharacteristics Using Bistable Foldable Structures, J. Vib. Acoust 139(3),031015 (Apr 24, 2017) (8 pages)
(319) 阿部綾,楊陽,奈良知惠,安達悠子,萩原一郎、二枚貼り折りによるアルミ缶適用に関する検討、日本応用数理学会論文誌 27(4), 305-332, 2017.
(320) Chenghai Kong, Xilu Zhao and Ichiro Hagiwara, Progressive multisteppress forming of a truss core panel for floor structure of electric vehicle,Int. J. Vehicle Performance, Vol. 4, No. 2, 2018 ,pp.200-217.
(321)Phuong Thao Thai, Maria Savchenko, Ichiro Hagiwara, Finite elementsimulation of robotic origami folding, Simulation Modelling Practice andTheory 84 (2018) 251–267.
(322)奈良 知惠, 萩原 一郎, 楊 陽, 陳 曉詩、厚板の折り畳み式ボックスとヒンジ支持棒、日本応用数理学会論文集、29 巻 1 号(2019-3),pp.46-61
(323)楊 陽,奈良 知惠, 萩原 一郎、折紙構造による折畳みヘルメットの適用に関する検討、日本シミュレーション学会論文誌、2019年11 巻 1 号,p.1-13
(324) Diago L., Shinoda J., Hagiwara I. (2020) Meta-Heuristic Approachesfor Automatic Roof Measurement in Solar Panels Installations. In: LlanesSantiago O., Cruz Corona C., Silva Neto A., Verdegay J. (eds) ComputationalIntelligence in Emerging Technologies for Engineering Applications. Studiesin Computational Intelligence, vol 872. Springer, Cham, pages 39-52.
(325) Savchenko,M., Savchenko,V., Abe, A.,Hagiwara,I.,Thao,T.,P., A study on an origami-based structure for use as a sun umbrella,SN Applied Sciences(2020,6).
(326) 阿部 綾, 屋代 春樹, 萩原 一郎、有限要素法を用いた垂直入射遮音シミュレーション技術の開発と軽量コアへの適用、日本機械学会論文集2020 年 86 巻 891 号 p.2000126発行日: 2020年、公開日: 2020/11/25 [早期公開] 公開日: 2020/10/12
(327)Diago,L.,Abe,H., Adachi,K. and Hagiwara,I., Exploring Fuzzy-Quantized Holographic Neural Networks for Driver Monitoring in Conditional Driving Automation, CUBAN JOURNAL OF DIGITAL TRANSFORMATION”, Vol. 2 , No. 1 (2021-1),pp. 46-65.
(328) 梁 狄, 楊 陽, 孔 呈海, 景 陽, 趙 巍, 趙 希禄, 萩原 一郎、反転ねじり型エネルギー吸収構造とその安価な部分加熱ねじり加工法、日本機械学会論文集, 2021 年 87 巻 895 号 p. 20-00425、発行日: 2021年、公開日: 2021/03/25、
DOIhttps://doi.org/10.1299/transjsme.20-00425
(329)  山崎 桂子, 阿部 富士子, 萩原 一郎, 「折」を生かした日本独自の描画法「扇」の数理的解明の試み, 日本機械学会論文集, 2021 年 87 巻 898 号、発行日: 2021年、公開日: 2021/06/25,　 DOI doi.org/10.1299/transjsme.21-00042

(330)寺田 耕輔, 萩原 一郎,折紙工法におけるプレスによる折線加工法の提案, 日本機械学会論文集, 2021 年 87 巻 898 号、発行日: 2021年、公開日: 2021/06/25、[早期公開] 公開日: 2021/05/14].
https://www.jstage.jst.go.jp/article/transjsme/87/898/87_21-00070/_article/-char/ja/
(331)Zhao, X., C. Kong, Yang,Y. and Hagiwara, I., Reversed-torsion-type crush energy absorption structure and its inexpensive partial-heating torsion manufacturing method based on origami engineering, Journal of Manufacturing Science and Engineering, DOI: 10.1115/1.4052438(2021-9).
(332)Hagiwara,I., Global Optimization Method to Multiple Local Optimals with the Surface Approximation Methodology and Its Application for Industry Problems [Online First], DOI: 10.5772/intechopen.98907.(2021-9), pp.1-41.
(333)Terada,K. and Ichiro Hagiwara, Effective Folding Line Processing with a Press Method in Origami Forming Using a Low-cost and Simple V-shaped Punch Tool System, International Journal of Mechanical Engineering and Applications 2021; 9(6): 98-112 http://www.sciencepublishinggroup.com/j/ijmea , doi: 10.11648/j.ijmea.20210906.13 , ISSN: 2330-023X (Print); ISSN: 2330-0248 (Online)
(334) Aya Abe, Ichiro Hagiwara, Development of New Sound Insulation Simulation Technology Using Finite Element Method for Efficiency of High Aspect Ratio Core in Low Frequency Range, International Journal of Mechanical Engineering and Applications, Vol.10,No.1(2022-2),pp.7-16.
(335)Hagiwara,I., Chie Nara, C. and Yang, Y., Development of new foldable polyethylene terephthalate bottles, Journal of Advanced Simulation in Science and Engineering (JASSE) , Vol. 9, No. 2(2022),pp.247-262.
(336)Sasaki,T, Yang,Y, Hagiwara,I, Proposition of a New High Speed and High Efficiency Control Method for Plural Eigen Frequencies by Changing Topology , International Journal of Mechanical Engineering and Applications 10(6), 2022-11, pp.135-143.
(337) Abe,A, Hagiwara, I, Yang,Y, Chie Nara,C, Characteristic Analysis of Two Pairing Origami Polyhedrons and Their Application to Beverage Containers, International Journal of Mechanical Engineering and Applications 10(6), 2022-10 pp.144-159.
(338) ディアゴ・ルイス, 篠田淳一, 山崎桂子、萩原一郎, 複雑構造に対する切り紙ハニカムの生成法に関する研究, 日本機械学会論文集, 2023 年 89 巻 917 号, 発行日: 2023 /01/25, 
DOI https://doi.org/10.1299/transjsme.22-00273.
(339)田志磊、孔呈海、趙巍、趙希禄、萩原一郎、キュービックコアパネルの曲げ剛性のモデル化とシミュレーションに関する研究、日本シミュレーション学会論文誌、2023年15 巻 1 号,p.1-13.
(340)萩原一郎，橋口真宜，米大海，内田博志、エネルギー最適制御理論に基づく操舵による緊急衝突回避の検討,日本機械学会論文集, 2023 年 89 巻 922 号, 発行日: 2023 /06/25, [早期公開] 公開日: 2023/06/08]. DOI: 10.1299/transjsme.22-00272].
(341) Hou,J., 1 , Chen,L. , Guan,J. , Wei Zhao,W. , Hagiwara,I. and Xilu Zhao, X.,A Laminated Spherical Tsunami Shelter with an Elastic Buffer Layer and Its Integrated Bulge Processing Method ,designs(2023-7), . https://doi.org/10.3390/designs7040095
(342) Tian,Z.,Guan,J., Wei Zhao,W.,Fukuchi, A.B., Zhao,X. and Hagiwara,I., Development of a Cubic Core Lightweight Panel Using Origami-Kirigami Engineering, International Journal of Mechanical Engineering and Applications 2023; 11(2): 38-48 http://www.sciencepublishinggroup.com/j/ijmea doi: 10.11648/j.ijmea.20231102.11 ISSN: 2330-023X (Print); ISSN: 2330-0248 (Online).
(343) 佐々木淑恵、萩原一郎、固有値制御のためのエネルギー密度位相変更法の提案,日本機械学会論文集, 2023 年 89 巻 927 号, 発行日: 2023 /11/25, [早期公開日]: 2023/11/13]. DOI: 10.1299/transjsme.23-00142].

(344)Guan , J., Yao,Y.,Zhao,W., Hagiwara,I. and Xilu Zhao,X., Development of an Impact Energy Absorption Structure by an Arc Shape Stroke Origami Type Hydraulic Damper,Shock and Vibration Shock and Vibration Volume 2023, Article ID 4578613, 11 pages https://doi.org/10.1155/2023/4578613.

(345) Yang Y., Sasaki T., Abe A. and Hagiwara I., The outstanding excellences of Interactive Energy Density Topology Change Method, International Journal of Mechanical Engineering and Applications 2024, Vol. 12, No. 2, pp. 37-49 https://doi.org/10.11648/j.ijmea.20241202.11
(346)安部 博枝，Diago Luis，南畑 淳史，萩原 一郎^*4，自動運転システムとドライバーの協調制御を目指したリアルタイム集中度計測のための一考察、日本機械学会論文集、2025年91巻944号、発行日：2025/04/25, DOI:10.1299/transjsme.24-00222.